Search Results

Standard

Fuel and Oil Hoses

2022-05-02

CURRENT

J30_202205

This SAE Standard covers fuel, oil, or emission hose for use in coupled and uncoupled applications, for use with gasoline, oil, diesel fuel, lubrication oil, or the vapors present in either the fuel system or in the crankcase of internal combustion engines in mobile or stationary applications. This standard covers the hose portion only. If assembly/coupling is required, that is to be agreed to between the customer and assembler, along with the specific requirements.

Standard

Type “F” Clamps for Plumbing Applications

2022-02-02

CURRENT

J1670_202202

This SAE Standard covers complete dimensional and general specifications for worm drive hose clamps for general use in the plumbing industry.

Standard

Low-Permeation Fuel Fill and Vent Tube

2021-09-14

CURRENT

J2405_202109

This SAE Standard covers the minimum requirements for a low-permeation tubing (100 g/m2/day or less) for use as a low pressure (14.5 kPa) liquid- or vapor-carrying component for use in gasoline or diesel fuel filler, vent, and vapor systems. The construction shall be designed to be functional over a temperature range of -40 to 100 °C for the T1 designation, or -40 to 125 °C for the T2 designation.

Standard

Dimensions and Tolerances for Coolant System Hoses

2021-03-08

CURRENT

J2387_202103

The purpose of this SAE Recommended Practice is to provide dimensions for both standard and thin-wall hoses and to provide commercial and precision tolerances for SAE 20R3 and SAE 20R4 coolant system hoses.

Standard

General Requirement for Preformed Hoses for Air Induction on Heavy-Duty Engines

2020-01-29

WIP

J2140

This SAE Standard outlines the requirements for a preformed thermosetting hose intended for use in heavy-duty vehicle engines, such as air cleaner to carburetor hose, where it is exposed to normal heat and splash of motor oil.

Standard

Clamping Force Test Procedure

2018-03-04

CURRENT

J2371_201803

This SAE Recommended Practice is a test procedure to obtain force data for self-compensating type clamps (SAE Type E, CTB, and CTW).

Standard

Windshield Washer Tubing

2015-04-21

CURRENT

J1037_201504

This SAE Standard covers nonreinforced, extruded, flexible tubing intended primarily for use as fluid lines for automotive windshield washer systems which conform to the requirements of SAE J942.

Standard

Compression Set of Hoses or Solid Discs

2015-04-21

CURRENT

J1638_201504

This SAE Recommended Practice is used for establishing the compression set that could be expected to occur with a thermoset elastomeric hose under securing clamps. It seeks to reproduce the type of indentation caused by the clamps in the wall of a hose. An excessive compression set measured by this method may indicate a hose that could eventually allow leakage of fluid or gas past the clamps in service.

Standard

Refrigerant 12 Automotive Air-Conditioning Hose

2015-04-21

CURRENT

J51_201504

This SAE Standard covers reinforced hose, or hose assemblies, intended for conducting liquid and gaseous dichlorodifluoromethane (refrigerant 12) in automotive air-conditioning systems. The hose shall be designed to minimize permeation of refrigerant 12 and contamination of the system and to be serviceable over a temperature range of −30 to 120 °C (−22 to 248 °F). Specific construction details are to be agreed upon between user and supplier.1 NOTE—R12 refrigerant has been placed on a banned substance list due to its ozone depletion characteristics. SAE J51 specification will be phased out as new automotive A/C systems are using R134a. SAE J2064 is the Standard for refrigerant 134a hose. For refrigerant 134a use, refer to SAE J2064.

Standard

General Requirement for Preformed Hoses for Air Induction on Heavy-Duty Engines

2014-06-04

CURRENT

J2140_201406

This SAE Standard outlines the requirements for a preformed thermosetting hose intended for use in heavy-duty vehicle engines, such as air cleaner to carburetor hose, where it is exposed to normal heat and splash of motor oil.

Standard

Fuel and Oil Hoses

2012-02-17

HISTORICAL

J30_201202

This SAE standard covers fuel, oil, or emission hose for use in coupled and uncoupled applications, for use with gasoline, oil, diesel fuel, lubrication oil, or the vapors present in either the fuel system or in the crankcase of internal combustion engines in mobile or stationary applications. This standard covers the hose portion only. If assembly / coupling is required, that is to be agreed to between the customer and assembler, along with the specific requirements.

Standard

Dimensions and Tolerances for Coolant System Hoses

2010-08-26

HISTORICAL

J2387_201008

The purpose of this SAE Recommended Practice is to provide dimensions for both standard and thin-wall hoses and to provide commercial and precision tolerances for SAE 20R3 and SAE 20R4 coolant system hoses.

Standard

Hose Clamp Specifications

2009-03-06

HISTORICAL

J1508_200903

This SAE Standard covers thirty-two (32) types of clamps most commonly and suitably being used on OEM coolant, fuel, oil, vacuum, and emission systems.

Standard

Fuel and Oil Hoses

2008-12-23

HISTORICAL

J30_200812

This SAE standard covers fuel, oil, or emission hose for use in coupled and uncoupled applications, for use with gasoline, oil, diesel fuel, lubrication oil, or the vapors present in either the fuel system or in the crankcase of internal combustion engines in mobile or stationary applications. This standard covers the hose portion only. If assembly / coupling is required, that is to be agreed to between the customer and assembler, along with the specific requirements.

Standard

Type "F" Clamps for Plumbing Applications

2008-12-02

HISTORICAL

J1670_200812

This SAE Standard covers complete dimensional and general specifications for worm drive hose clamps for general use in the plumbing industry.

Standard

Low-Permeation Fuel Fill and Vent Tube

2007-07-02

HISTORICAL

J2405_200707

This SAE Standard covers the minimum requirements for a low-permeation tubing (100 g/m2·day or less) for use as a low pressure (14.5 kPa) liquid- or vapor-carrying component for use in gasoline or diesel fuel filler, vent, and vapor systems. The construction shall be designed to be functional over a temperature range of –40 °C to 100 °C for the T1 designation, or –40 °C to 125 °C for the T2 designation.

Standard

Windshield Washer Tubing

2006-03-03

HISTORICAL

J1037_200603

This SAE Standard covers nonreinforced, extruded, flexible tubing intended primarily for use as fluid lines for automotive windshield washer systems which conform to the requirements of SAE J942.

Standard

General Requirement for Preformed Hoses for Air Induction on Heavy-Duty Engines

2005-09-12

HISTORICAL

J2140_200509

This SAE Standard outlines the requirements for a preformed thermosetting hose intended for use in heavy-duty vehicle engines, such as air cleaner to carburetor hose, where it is exposed to normal heat and splash of motor oil.

Standard

Refrigerant 12 Automotive Air-Conditioning Hose

2004-06-14

HISTORICAL

J51_200406

This SAE Standard covers reinforced hose, or hose assemblies, intended for conducting liquid and gaseous dichlorodifluoromethane (refrigerant 12) in automotive air-conditioning systems. The hose shall be designed to minimize permeation of refrigerant 12 and contamination of the system and to be serviceable over a temperature range of −30 to 120 °C (−22 to 248 °F). Specific construction details are to be agreed upon between user and supplier.1

Standard

Hose Gauge Evaluation Procedure

2003-11-04

HISTORICAL

J2666_200311

The Gauge Evaluation Procedure Task Force was formed by the Non-Hydraulic Hose Committee to develop a gauge evaluation procedure to be used when evaluating the capability of gauges used for hose measurement. The use of a standard method for gauge evaluation will help users easily compare equipment capability. The information provided in this recommendation is based on the methods used to produce the data presented in SAE J1759 and J2605.