Search Results

The vehicle axle gear whine noise and vibration are key issues for the automotive industry to design a quiet, reliable driveline system. The main source of excitation for this vibration energy comes from hypoid gear transmission error (TE). The vibration transmits through the flexible axle components, then radiates off from the surface of the housing structure. Thus, the design of hypoid gear pair with minimization of TE is one way to control the dynamic behavior of the vehicle axle system. In this paper, an approach to obtain minimum TE and improved dynamic response with optimal tooth profile modification parameters is discussed. A neural network algorithm, named Back Propagation (BP) algorithm, with improved Particle Swarm Optimization (PSO) is used to predict the TE if some tooth profile modification parameters are given to train the model.

Active noise control (ANC) technique with the filtered-x least mean square (FXLMS) algorithm has proven its efficiency and drawn increasingly interests in vehicle noise control applications. However, many vehicle interior and/or exterior noises are exhibiting non-Gaussian type with impulsive characteristic, such as diesel knocking noise, injector ticking, impulsive crank-train noise, gear rattle, and road bumps, etc. Therefore, the conventional FXLMS algorithm that is based on the assumption of deterministic and/or Gaussian signal may not be appropriate for tackling this type of impulsive noise. In this paper, an ANC system configured with modified FXLMS (MFXLMS) algorithm by adding thresholds on reference and error signal paths is proposed for impulsive noise control. To demonstrate the effectiveness of the proposed algorithm, an experimental study is conducted in the laboratory.

An enhanced, frequency domain filtered-x least mean square (LMS) algorithm is proposed as the basis for an active control system for treating powertrain noise. There are primarily three advantages of this approach: (i) saving of computing time especially for long controller’s filter length; (ii) more accurate estimation of the gradient due to the sample averaging of the whole data block; and (iii) capacity for rapid convergence when the adaptation parameter is correctly adjusted for each frequency bin. Unlike traditional active noise control techniques for suppressing response, the proposed frequency domain FXLMS algorithm is targeted at tuning vehicle interior response in order to achieve a desirable sound quality. The proposed control algorithm is studied numerically by applying the analysis to treat vehicle interior noise represented by either measured or predicted cavity acoustic transfer functions.

The noise and vibration response of hypoid or bevel geared rotor system, primarily excited by transmission error (TE), and mesh vector and stiffness variations, can be affected significantly by the coupling between the driveline rotor dynamics and gear vibratory response. This is because of the inherent design comprising of non-parallel rotational axes and time-varying as well as spatial-varying gear mesh characteristics. One of the important factors of the driveline system dynamics is the rotor gyroscopic effect that has not been studied extensively in traditional gear dynamics. To address this gap in the literature, this paper attempts to examine the influence of incorporating gyroscopic terms in the hypoid gear dynamic simulation. A multi-degrees-of-freedom, multi-body dynamic model is used as a generalized representation of a hypoid geared rotor system.

High speed, precision geared rotor systems are often plagued by excessive vibration and noise problems. The response that is primarily excited by gear transmission error is actually coupled to the large displacement rotational motion of the driveline system. Classical pure vibration model assumes that the system oscillates about its mean position without coupling to the large displacement motion. To improve on this approach and understanding of the influences of the dynamic coupling, a coupled multi-body dynamic and vibration simulation model is proposed. Even though the focus is on hypoid geared rotor system, the model is more general since hypoid and bevel gears have more complicated geometry and time and spatial-varying characteristics compared to parallel axis gears.

A proposed multi-coordinate spectral-based inverse substructuring approach is applied experimentally to examine the vibration transmissibility through chassis mounts. In this formulation, the vehicle system is partitioned into two substructures. One substructure comprises of the chassis and suspension, while the second one is the body structure and other attached components. The approach yields the free substructure dynamic characteristics that are extracted from the measured coupled system response spectra. The resultant free substructure transfer functions are verified by comparison of the re-synthesized results to the actual vehicle system measurements. A real life vehicle setup is utilized to demonstrate the salient features and capabilities of this approach, which includes the ability to compute the main structure-borne paths, dynamic interactions between the chassis and body, and interior noise and vibration response.

The vibratory energy from the ring gear resulting due to planet/ring gear dynamic forces is typically transmitted via structure-borne paths and is most evident in the range of 1-6000 Hz for automotive transmissions. In this paper, a comprehensive parametric force response analysis to study the vibration transmissibility characteristics of typical automotive planetary ring gears is performed. Effects of various geometrical parameters and number of planets on vibration transmissibility characteristics of ring gear structure are also studied. The planet/ring gear mesh forces are explicitly defined as externally applied force. Vibration transmissibility is defined by the spatial average acceleration response of the outer surface of the ring gear. The root mean square (RMS) value of these average responses is also predicted.

This paper is intended to describe some of the advances in automotive NVH research and applications based on recent developments in the Structural Dynamics Research Laboratory (SDRL) at the University of Cincinnati. State-of-the-art vibro-acoustic research capabilities and infrastructure ranging from advanced vibration modal analysis and spectral techniques for linear and nonlinear automotive systems to computational tools for structure-borne acoustic noise generation, transmission and synthesis problems are discussed. These systems have been devised with the intent of integrating a versatile set of experimental, computational and analytical approaches in order to be able to investigate a variety of crucial automotive NVH concerns. The materials will be grouped into three separate but closely related sets of applications consisting of (i) powertrain noise and vibration control, (ii) analysis and control vehicle system dynamics, and (iii) NVH and sound quality.

A multi-coordinate FRF-based inverse substructuring approach is proposed to partition a vehicle system into two or more substructures, which are coupled at discrete interface points. The joint and free substructure dynamic characteristics are then extracted from the coupled system response spectra. Depending on the actual form of the structural coupling terms, three forms of the coupling matrix are assumed here. The most general one constitutes the non-diagonal form, and the other two simpler cases are the block-diagonal and purely diagonal representations that can be used to simplify testing process and overcome computational problems. The paper is focused on the investigation of the durability of these three formulations when the input FRFs are noise contaminated. A finite element model of a simplified vehicle system is used as the case study.

Vehicle NVH performance is significantly affected by the dynamics of various primary systems. In the automotive industry, different design activities or vendors are responsible for designing various different systems simultaneously. Therefore, it is highly desirable to gain a better understanding of the individual system characteristics and the interaction between the primary systems to achieve a desirable overall NVH performance. Unfortunately, it is usually quite difficult to construct a proper fixture to accurately measure and quantify the actual uncoupled system characteristics. This paper examines an alternate approach of applying the FRF-based substructuring method to back-calculate the system response characteristics from the full vehicle system measurements. The results are then used to forward-compute the dynamic response of the vehicle, which are also validated by comparison to the direct response function measurements.

A series of system level experiments were conducted using 2 vehicles of identical design to measure, analyze and quantify crank rumble noise from the viewpoint of source strength and path dynamic response. One of the vehicles was known to produce relatively severe crank rumble response (noisy), while the second vehicle was almost free of the annoying response (quiet). Two specific operating conditions most susceptible to crank rumble noise were of interest: (1) no load snaps in neutral and (2) hard acceleration in second gear. For each condition, the vibration and sound pressure responses throughout the vehicle were obtained. The measured data was analyzed critically to determine frequency content and strength of rumble noise at each location. Calculations were also performed from the measured data to determine the modes of transmission and the relative contributions from air-borne and structure-borne paths.

In this paper, we discuss methods used to investigate a clearly audible gear whine problem in a modern automobile. Currently available PC-based computer software, coupled with more traditional engineering tools, such as spectrum analyzers, are employed to efficiently observe noise and vibration phenomena. Jury evaluations are conducted, using in-vehicle noise data, to rank actual gear whine levels. Additional jury studies using synthesized gear whine help us further understand listener preferences. Unloaded gear transmission error testing is explored as a means of predicting gear whine levels under light loads, such as those seen during highway cruising. We finally correlate many results to better understand the source and paths of the gear noise, and make recommendations for further exploration of this type of problem.

This paper describes the procedures used to reduce the tonal noise of a class eight truck engine timing gear train that was initially found to be objectionable under idle operating conditions. Initial measurements showed that the objectionable sounds were related to the fundamental gear mesh frequency, and its second and third harmonics. Experimental and computational procedures used to study and trouble-shoot the problem include vibration and sound measurements, transmission error analysis of the gears under light load condition, and a dynamic analysis of the drive system. Detail applications of these techniques are described in this paper.

The design of automotive components for low structure-borne interior noise and vibration is facilitated by the ability to reliably simulate total vehicle system response over a wide operating frequency range. This requires that the car body, its interior acoustic cavity, and critical chassis components must be included in the overall dynamic model. Unfortunately, most noise and vibration problems occur in the 200-1000 Hz frequency range where finite element and experimental modal methods have limited applicability. This is due to the high modal density, high damping levels, and sensitivity to fine geometric detail. A simulation method has been proposed earlier which uses component finite element models and component experimental transfer functions to predict combined system response [1]. This method has allowed for a practical approach to automotive system noise and vibration simulation.

The design of automotive components for low structure-borne interior noise and vibration requires the ability to reliably simulate total vehicle system response over a wide operating frequency range. This implies that the car body, its interior acoustic cavity, and critical structural components must be included in this overall dynamic model. Unfortunately, most noise and vibration problems occur in the 200-1000 Hz frequency range where existing finite element and experimental modal methods have limited applicability. This is due to the high modal density, high damping levels, and sensitivity to fine geometric detail. Moreover, it is highly doubtful that these methods will ever be practical tools for the study of the total body dynamics over the frequency range of 200-1000Hz. In this paper, a practical hybrid experimental-analytical approach is proposed in response to the need to simulate high frequencies structure-borne noise and vibration in automotive systems.