Search Results

Abstract The ground vibration test (GVT) is an important phase in a new aircraft development program, or the structural modification of a certified aircraft, to experimentally determine the structural vibrational modes of the aircraft and their modal parameters. These modal parameters are used to validate and correlate the dynamic finite element model of the aircraft to predict potential structural instabilities (such as flutter), assessing the significance of modifications to research vehicles by comparing the modal data before and after the modification and helping to resolve in-flight anomalies. Due to the high cost and the extensive preparations of such tests, a new method of vibration testing called the taxi vibration test (TVT) rooted in operational modal analysis (OMA) was recently proposed and investigated as an alternative method to conventional GVT.

Abstract A unique torque converter test setup was used to measure the torque transmissibility frequency response function of four torque converter clutch dampers using a stepped, multi-sine-tone, excitation technique. The four torque converter clutch dampers were modeled using a lumped parameter technique, and the damper parameters of stiffness, damping, and friction were estimated using a manual, iterative parameter estimation process. The final damper parameters were selected such that the natural frequency and damping ratio of the simulated torque transmissibility frequency response functions were within 10% and 20% error, respectively, of the experimental modal parameters. This target was achieved for all but one of the tested dampers. The damper models include stiffness nonlinearities, and a speed-dependent friction torque due to centrifugal loading of the damper springs.

Abstract Ground vibration testing (GVT) is an important phase of the development, or the structural modification of an aircraft program. The modes of vibration and their associated parameters extracted from the GVT are used to modify the structural model of the aircraft to make more reliable dynamics predictions to satisfy certification authorities. Due to the high cost and the extensive preparations for such tests, a new method of vibration testing called taxi vibration testing (TVT) rooted in operational modal analysis (OMA) was recently proposed and investigated by the German Institute for Aerospace Research (DLR) as alternative to conventional GVT. In this investigation, a computational framework based on fully coupled flexible multibody dynamics for TVT is presented to further investigate the applicability of the TVT to flexible airframes. The time domain decomposition (TDD) method for OMA was used to postprocess the response of the airframe during a TVT.

Abstract The United Nation Economic Commission for Europe (UNECE) Regulation 155—Cybersecurity and Cybersecurity Management System (UN R155) mandates the development of cybersecurity management systems (CSMS) as part of a vehicle’s lifecycle. An inherent component of the CSMS is cybersecurity risk management and assessment. Validation and verification testing is a key activity for measuring the effectiveness of risk management, and it is mandated by UN R155 for type approval. Due to the focus of R155 and its suggested implementation guideline, ISO/SAE 21434:2021—Road Vehicle Cybersecurity Engineering, mainly centering on the alignment of cybersecurity risk management to the vehicle development lifecycle, there is a gap in knowledge of proscribed activities for validation and verification testing.

Abstract Recent legislations require very low soot emissions downstream of the particulate filter in diesel vehicles. It will be difficult to meet the new more stringent OBD requirements with standard diagnostic methods based on differential sensors. The use of inexpensive and reliable soot sensors has become the focus of several academic and industrial works over the past decade. In this context, several diagnostic strategies have been developed to detect DPF malfunction based on the soot sensor loading time. This work proposes an advanced online diagnostic method based on soot sensor signal projection. The proposed method is model-free and exclusively uses soot sensor signal without the need for subsystem models or to estimate engine-out soot emissions. It provides a comprehensive and efficient filter monitoring scheme with light calibration efforts.

Abstract The present study examines the effect of the multiple injection strategies in a common rail diesel engine using machine learning, image processing, and object detection techniques. The study demonstrates a novel approach of utilizing image-processing tools to gain information from heat release rates and in-cylinder visualizations from experimental or computational studies. The 3D CFD combustion and emission predictions of a commercial code ANSYS FORTE© are validated with small-bore common rail diesel engine data with known injection strategies. The validated CFD tool is used as a virtual plant model to optimize the injection schedule for reducing oxides of nitrogen (NOx) and soot emissions using an apparent heat release rate image-based machine learning tool. A methodology of the machine learning tool is quite helpful in predicting the NO–soot trade-off.

Abstract Since the complexity of modern vehicles is increasing continuously, car manufacturers are forced to improve the efficiency of their development process to remain profitable. A frequently mentioned measure is the consequent integration of virtual methods. In this regard, objective evaluation criteria are essential for the virtual design of driving dynamics. Therefore, this article aims to identify robust objective evaluation criteria for the nonlinear combined longitudinal and lateral dynamics of a vehicle. The article focuses on the acceleration in a turn maneuver since available objective criteria do not consider all relevant characteristics of vehicle dynamics. For the identification of the objective criteria, a generic method is developed and applied. First, an open-loop test procedure and a set of potential robust objective criteria are defined.

Abstract The European Union’s pro-ecological policy imposes a requirement to use biofuel additives in diesel fuel which is supposed to support the sustainable development of transport and limit its negative impact on the natural environment. The study presents an analysis of the exhaust gas components and the amount of solid particles carried out for internal combustion engines fueled with mixtures of diesel fuel and fatty acid methyl esters. Additionally, the computer software of the tested power units was modified by changing the amount of fuel to be supplied and the air intake. The goal of the tests was to find out how the fuel mixture and reprogramming of the computer control systems would impact the emission of exhaust gas components. Based on the tests, it was found that an additive of fatty acid methyl esters to diesel does have an influence on the tested unit parameters.

Abstract The ASTM D130 was first issued in 1922 as a tentative standard for the detection of corrosive sulfur in gasoline. A clean copper strip was immersed in a sample of gasoline for three hours at 50°C with any corrosion or discoloration taken to indicate the presence of corrosive sulfur. Since that time, the method has undergone many revisions and has been applied to many petroleum products. Today, the ASTM D130 standard is the leading method used to determine the corrosiveness of various fuels, lubricants, and other hydrocarbon-based solutions to copper. The end-of-test strips are ranked using the ASTM Copper Strip Corrosion Standard Adjunct, a colored reproduction of copper strips characteristic of various degrees of sulfur-induced tarnish and corrosion, first introduced in 1954. This pragmatic approach to assessing potential corrosion concerns with copper hardware has served various industries well for a century.

Abstract The use of data-driven algorithms for the integration or substitution of current production sensors is becoming a consolidated trend in research and development in the automotive field. Due to the large number of variables and scenarios to consider; however, it is of paramount importance to define a consistent methodology accounting for uncertainty evaluations and preprocessing steps, that are often overlooked in naïve implementations. Among the potential applications, the use of virtual sensors for the analysis of solid emissions in transient cycles is particularly appealing for industrial applications, considering the new legislations scenario and the fact that, to our best knowledge, no robust models have been previously developed.

Abstract The progressive development toward highly automated driving poses major challenges for the release and validation process in the automotive industry, because the immense number of test kilometers that have to be covered with the vehicle cannot be tackled to any extent with established test methods, which are highly focused on the real vehicle. For this reason, new methodologies are required. Simulation-based testing and, in particular, virtual driving tests will play an important role in this context. A basic prerequisite for achieving a significant reduction in the test effort with the real vehicle through these simulations are realistic test scenarios. For this reason, this article presents a novel approach for generating relevant traffic situations based on a traffic flow simulation in SUMO and a vehicle dynamics simulation in CarMaker. The procedure is shown schematically for an emergency braking function.

Abstract To have a more complete understanding of the fuel effects on each subsequent stage of a stochastic preignition event in a spark-ignition engine and to build on the previous work of understanding the propensity of fuel to initiate and sustain a preignition flame, this work is focused on examining the role of fuel on the onset of knock and the intensity of superknock once the unburned mixture reaches certain conditions ahead of the preignition flame. Using a “skip advance” spark test method to simulate preignition flames initiated at different cylinder conditions, more than 20 single- and multicomponent fuels were ranked based on the condition required to reach the onset of knock (the start of end-gas autoignition) and the condition that leads to severe superknock intensities.

Abstract Earlier studies have proven how ducted fuel injection (DFI) substantially reduces soot for low- and mid-load conditions in heavy-duty engines, without significant adverse effects on other emissions. Nevertheless, no comprehensive DFI study exists showing soot reductions at high- and full-load conditions. This study investigated DFI in a single-cylinder, 1.7-L, optical engine from low- to full-load conditions with a low-net-carbon fuel consisting of 80% renewable diesel and 20% biodiesel. Over the tested load range, DFI reduced engine-out soot by 38.1–63.1% compared to conventional diesel combustion (CDC). This soot reduction occurred without significant detrimental effects on other emission types. Thus, DFI reduced the severity of the soot–NOx tradeoff at all tested conditions.

Abstract Assessing the functional quality of an engine lubricant through real-time sensing could pave the way for development of comprehensive engine health monitoring systems. In this study, a permittivity-based, commercial off-the-shelf (COTS) oil quality sensor was implemented in the lubricant flow of a diesel engine after detailed evaluation on a benchtop test facility. The sensor was mounted on the oil filter housing of the engine in the post-filter oil flow, and its implementation required no modifications to the engine block. Simultaneously, the lubricant flow was visualized by incorporating a novel test cell in the oil flow path. Both the sensor assembly and the flow visualization cell were fully characterized on the benchtop facility prior to implementation on the engine.

Abstract Certain advanced driver assistance systems (ADAS) have the potential to boost energy efficiency in real-world scenarios. This article details a radar-based driver assistance scheme designed to minimize fuel consumption for a commercial vehicle by predictively optimizing braking and driving torque inputs while accommodating the driver’s demand. The workings of the proposed scheme are then assessed with a novel integration of the driver assistance functionality in randomized traffic microsimulation. Although standardized test procedures are intended to mimic urban and highway speed profiles for the purposes of evaluating fuel economy and emissions, they do not explicitly consider the interactions present in real-world driving between the ego vehicle equipped with ADAS and other vehicles in traffic. This article presents one approach to address the drawback of standardized test procedures for evaluating the fuel economy benefits of ADAS technologies.

Abstract This work describes an investigation of measurement techniques for the indicated mean effective pressure (IMEP) on a 55 cc single-cylinder, 4.4 kW, two-stroke, spark ignition (SI) engine intended for use on Group 1 and Group 2 remotely piloted aircraft (RPAs). Three different sensors were used: two piezoelectric pressure transducers (one flush mount and one measuring spark plug) for measuring in-cylinder pressure and one capacitive sensor for determining the top dead center (TDC) position of the piston. The effort consisted of three objectives: to investigate the merits of a flush mount pressure transducer compared to a pressure transducer integrated into the spark plug, to perform a parametric analysis to characterize the effect of the variability in the engine test bench controls on the IMEP, and to determine the thermodynamic loss angle for the engine.

Abstract With the introduction of advanced lightweight materials with complex microstructures and behaviors, more focus is put on the accurate determination of their forming limits, and that can only be possible through experiments as the conventional theoretical models for the forming limit curve (FLC) prediction fail to perform. Despite that, CAE engineers, designers, and toolmakers still rely heavily on theoretical models due to the steep costs associated with formability testing, including mechanical setup, a large number of tests, and the cost of a stereo digital image correlation (DIC) system. The international standard ISO 12004-2:2021 recommends using a stereo DIC system for formability testing since two-dimensional (2D) DIC systems are considered incapable of producing reliable strains due to errors associated with out-of-plane motion and deformation.

Abstract To understand how the composition of novel lubricant additives and their ash interact with gasoline particulate filters (GPFs), an accelerated aging protocol was conducted using three lubricant additive formulations and two GPF types. The additive packages (adpaks) consisted of Ca+Mg detergent in a 3:1 or 0:1 ratio and an anti-wear component—either zinc dialkyl dithiophosphate (ZDDP) or a novel phosphonium-phosphinate ionic liquid (IL) substitute. The particulate sampling captured amount/compositions of particulate matter (PM) generated, total particulate number, and size distribution. Five ash loadings were completed. GPF position and adpak composition affected the backpressure, ash composition, ash morphology, and captured mass. The particulate sampling indicated that the ash component consisted primarily of particles less than 50 nm in size and that the Mg-only adpak resulted in more particulate of 50–400 nm in size.

Abstract Climate change and stringent emission regulations have become major challenges for the automotive sector, prompting researchers to investigate advanced combustion technologies. Gasoline compression ignition (GCI) technology has emerged as a potential solution, delivering higher brake thermal efficiency with ultra-low nitrogen oxides (NOx) and particulate emissions. Combustion stability and controls are some of the significant challenges associated with GCI. This study investigates the combustion characteristics of a two-cylinder diesel engine in GCI mode. GCI experiments were performed using a low-octane fuel prepared by blending 80% (v/v) gasoline and 20% (v/v) diesel (G80). Baseline experiments were conducted in conventional diesel combustion (CDC) mode. These experiments investigated the effects of double pilot injection, first pilot fuel ratio, and the start of main fuel injection timing (10–8°CA before top dead center, bTDC).

Abstract Internal combustion (IC) engines play an important role in the global economy by powering various transport applications. However, it is a leading cause of urban air pollution; therefore, new combustion strategies are being developed to control emissions. One promising advanced low-temperature combustion (LTC) technology is gasoline compression ignition (GCI). This experimental study assesses the performance of a two-cylinder engine, emissions, and exhaust particulate characteristics using G80 (80% v/v gasoline and 20% v/v diesel) blend operating in GCI mode vis-à-vis baseline conventional diesel combustion (CDC) mode using diesel. The effects of double pilot injection, Pilot-1 proportion (10–30%), and main injection timing were investigated on the GCI combustion. Experiments were performed at different engine loads (3, 4, and 5 bar brake mean effective pressure [BMEP]) at a constant engine speed (2000 rpm).