Search Results

Abstract This study aims to explore the wear characteristics of fused deposition modeling (FDM) printed automotive parts and techniques to improve wear performance. The surface roughness of the parts printed from this widely used additive manufacturing technology requires more attention to reduce surface roughness further and subsequently the mechanical strength of the printed geometries. The main aspect of this study is to examine the effect of process parameters and annealing on the surface roughness and the wear rate of FDM printed acrylonitrile butadiene styrene (ABS) parts to diminish the issue mentioned above. American Society for Testing and Materials (ASTM) G99 specified test specimens were fabricated for the investigations. The parameters considered in this study were nozzle temperature, infill density, printing velocity, and top/bottom pattern.

Abstract Taking the semi-active suspension system as the research object, the forward model and inverse model of a continuous damping control (CDC) damper are established based on the characteristic test of the CDC damper. A multi-mode semi-active suspension controller is designed to meet the diverse requirements of vehicle performance under different road conditions. The controller parameters of each mode are determined using a genetic algorithm. In order to achieve automatic switching of the controller modes under different road conditions, a method is proposed to identify the road roughness based on the sprung mass acceleration. The average of the ratio between the squared sprung mass acceleration and the vehicle speed within a specific time window is taken as the identification indicator for road roughness.

Abstract In order to efficiently predict and investigate a vehicle’s vertical dynamics, it is necessary to consider the suspension component properties holistically. Although the effects of suspension stiffness and damping characteristics on vertical dynamics are widely understood, the impact of suspension friction in various driving scenarios has rarely been studied in both simulation and road tests for several decades. The present study addresses this issue by performing driving tests using a special device that allows a modification of the shock absorber or damper friction, and thus the suspension friction to be modified independently of other suspension parameters. Initially, its correct functioning is verified on a shock absorber test rig. A calibration and application routine is established in order to assign definite additional friction forces at high reproducibility levels.

Abstract This article introduces a methodology for conducting comparative evaluations of vibration-induced discomfort. The aim is to outline a procedure specifically focused on assessing and comparing the discomfort caused by vibrations. The article emphasizes the metrics that can effectively quantify vibration-induced discomfort and provides insights on utilizing available information to facilitate the assessment of differences observed during the comparisons. The study also addresses the selection of appropriate target scenarios and test environments within the context of the comparative evaluation procedure. A practical case study is presented, highlighting the comparison of wheel corner concepts in the development of new vehicle architectures. Currently, the evaluation criteria and difference thresholds available allow for comparative evaluations within a limited range of vehicle vibration characteristics.

Abstract A time domain analysis method of ride comfort and energy dissipation characteristics is proposed for automotive vibration proportional–integral–derivative (PID) control. A two-degrees-of-freedom single wheel model for automotive vibration control is established, and the conventional vibration response variables for ride comfort evaluation and the energy consumption vibration response variables for energy dissipation characteristics evaluation are determined, and the Routh stability criterion method was introduced to assess the impact of PID control on vehicle stability. The PID control parameters are tuned using the differential evolution algorithm, and to improve the algorithm’s adaptive ability, an adaptive operator is introduced, so that the mutation factor of differential evolution algorithm can change with the number of iterations.

Abstract With the use of the stepped surface of the friction pairs of the stepped bearings (SB) in the high-speed centrifugal pumps, its liquid film thickness is suddenly changed and it was discontinuously distributed in the direction of motion of pump. To ensure the continuity of the liquid film thickness and enhance the lubrication efficiency of the pump, based on the lubrication model of the SB, two other structures of the inclined surfaces [inclined bearings (IB)] and curved surfaces [curved bearings (CB)] used to replace stepped surfaces of the SB are investigated, respectively. Under the same conditions of the minimum thickness of the liquid film and initial dimensions of the sliding friction pairs, the influence of both the thickness ratio (α) of the liquid film and dimension ratio (β) in the direction of motion of SB, IB, and CB on the bearing capacity and friction coefficient of the liquid film are simulated and analyzed, respectively.

Abstract In view of the combustion efficiency and emission performance, various new clean combustion modes put forward higher requirements for the performance of the fuel injection system, and the cavitating two-phase flow characteristics in the injector nozzle have a significant impact on the spray atomization and combustion performance. This article comprehensively discusses and summarizes the factors that affect cavitation and the effectiveness of cavitation, and presents the research status and existent problems under each factor. Among them, viscosity factors are a hot research topic that researchers are passionate about, and physical properties factors still have the value of further in-depth research. However, the importance of material surface factors ranks last since the nozzle material was determined. Establishing a more comprehensive cavitation–atomization model considering various factors is the focus of research on cavitation phenomena.

Abstract Adaptive neural networks (ANNs) have become famous for modeling and controlling dynamic systems. However, because of their failure to precisely reflect the intricate dynamics of the system, these have limited use in practical applications and perform poorly during training and testing. This research explores novel approaches to this issue, including modifying the simple neuron unit and developing a generalized neuron (GN). The revised version of the neuron unit helps to develop the system controller, which is responsible for providing the desired control signal based on the inputs received from the dynamic responses of the vehicle suspension system. The controller is then tested and evaluated based on the performance of the magnetorheological (MR) damper for the main suspension system.

Abstract Pre-chamber jet ignition technologies have been garnering significant interest in the internal combustion engine field, given their potential to deliver shorter burn durations, increased combustion stability, and improved dilution tolerance. However, a clear understanding of the relationship between pre-chamber geometry, operating condition, jet formation, and engine performance in light-duty gasoline injection engines remains under-explored. Moreover, research specifically focusing on high dilution levels and passive pre-chambers with optical accessibility is notably scarce. This study serves to bridge these knowledge gaps by examining the influence of passive pre-chamber nozzle diameter and dilution level on jet formation and engine performance.

Abstract Vehicle vibration is the key consideration in the early stage of vehicle development. The most dynamic system in a vehicle is the powertrain system, which is a source of various frequency vibration inputs to the vehicle. Mostly for powertrain mounting system design, only the uncoupled powertrain system is considered. However, in real situations, other subsystems are also attached to the powertrain unit. Thereby, assuming only the powertrain unit ignores the dynamic interactions among the powertrain and other systems. To address this shortcoming, a coupled powertrain and driveline mounting system problem is formulated and examined. This 16 DOF problem is constructed around a case of a front engine-based powertrain unit attached to the driveline system, which as an assembly resting on other systems such as chassis, suspensions, axles, and tires.

Abstract Three suspension structures including the parallel vertical suspension (PVS), the horizontal parallel suspension (HPS), and the negative stiffness element added into suspension (NSES) of the driver’s seat are proposed to improve the driver’s ride comfort of off-road vehicles. Based on the dynamic models of the PVS, HPS, and NSES established and simulated under the same random excitations of the cab floor, the effect of the design parameters of the proposed models is analyzed, and the design parameters are then optimized to evaluate their isolation performance. The indexes of the root-mean-square (r.m.s) accelerations of the vertical seat direction, pitching seat angle, and rolling seat angle are used as the objective functions. The study results indicate that the dynamic parameters of the PVS, HPS, and NSES greatly affect the driver’s ride comfort while their geometrical dimensions insignificantly affect the driver’s ride comfort.

Abstract Articulated vehicles form an important part of our society for the transport of goods. Compared to rigid trucks, tractor-trailer combinations can transport huge quantities of load without increasing the axle load. The fifth wheel (FW) acts as a bridge between the tractor and trailer, which can be moved within the range to achieve rated front and rear axle loads. When the FW is moved front, it adversely affects the cab dynamics and cab suspension forces. Compared to the cab pitch and roll, yaw motion increases drastically. The current study tries to address this issue by providing reaction rod links in the rear cab suspension. In this study, a 4×2 tractor with a three-axle semitrailer is considered by keeping the FW at its frontmost position, which is the worst-case scenario for a cab. Three different cases of reaction rod arrangement and its influence on cab dynamics are studied in comparison with a model without reaction rods.

Abstract This research examined tractor operators’ daily vibration exposure A(8) with different input riding parameters, i.e., average speed (m/s) (2.78, 3.89, 5.0), body mass (BM) (kg/m2) (35.3, 32.6, 25.4), and different terrain types (brick, farm, and tar roads). To arrange the systematic sequence of experiments, Taguchi’s L9 orthogonal array has been selected for this study. The signal-to-noise ratio (SNR) is calculated to analyze the overall influence of input parameters over the output parameters. In this study, it is found that A(8) responses exceeded the recommended action value among all the tractor operators according to ISO 2631-1 (1997). The average speeds and various terrain conditions were shown to be the most influential significant variables (p ≤ 0.05), with percentage contributions of 53.71% and 11.53%, respectively.

Abstract There are significant differences in sound and vibration between combustion engine vehicles (CV) and electric vehicles (EV), which may affect occupants’ experiences of overall ride comfort. There have been few studies on human perception of the overall ride comfort in EVs. The purpose of this study is to identify how sound and vibration influence perceived overall ride comfort in an EV under different driving scenarios and to study differences between an EV and a CV in terms of the influences of sound and vibration on the perceived ride comfort. The user study compared the experiences of ten participants’ riding in a CV and an EV through eight typical driving scenarios. The subjective judgment and objective measurements showed that in the EV, dynamic discomfort was dominated by high-frequency tones from electric components. The influence of sound on dynamic discomfort was more pronounced in the EV, and the causes of sound annoyance differed between the EV and the CV.

Abstract The riding-comfort of high-speed trains affects the travel experience of passengers, and the lightweight design technology of the carbody increases the flexible vibration and reduces passenger comfort. To this end, a vertical dynamics model of railway vehicles is established to demonstrate the potential of using passive inerter-based suspensions to reduce the flexible vibration of the carbody and improve riding-comfort. According to the characteristics of the inerter component, an appropriate inerter-based suspension is applied to the railway vehicle to reduce low-frequency resonance. The sum of the comfort indexes of the three reference points of the carbody is optimized as the objective function to improve the passenger comfort of the whole vehicle. The results reveal that the inerter-based suspension applied to the primary or secondary suspension has different effects on vehicle vibration.

Abstract Optimization is essential in real-life mechanical engineering problems that mostly are nonlinear, depend on mixed decision variables, and are usually subject to constraints. However, most of the studied problems are modelled assuming continuous variables. A limited number of studies have been devoted to cases with mixed variables. Moreover, there is a lack of algorithm treating mixed variable problems properly. This article introduces a hybrid algorithm that can handle constrained problems depending on continuous or mixed variables. The proposed algorithm combines two meta-heuristics, Jaya and particle swarm optimization (PSO). PSO is one of the most popular methods to solve nonlinear problems, and Jaya is a novel parameter-free optimization algorithm. This new hybrid optimization algorithm is proposed in order to improve the convergence speed and to investigate what improvements it will bring to optimization problem solutions.

Abstract Under the influence of the interactions between the vibratory drum/wheel and deformable terrains, the ride comfort of the soil compactors is greatly affected. Therefore, the isolation systems of the cab and driver’s seat of the soil compactors have been researched and developed to improve ride comfort. Based on the existing research results, this study provides an overview of the development of the isolation systems of the cab and driver’s seat of the soil compactors. The research result shows that the cab isolations used by the semi-active hydraulic mounts (SHM) or semi-active hydraulic-pneumatic mounts (SHPM) can greatly improve the driver’s ride comfort and control the cab shaking, whereas the driver’s seat suspension embedded by the negative stiffness structure (NSS) strongly improves the driver’s ride comfort.

Abstract The use of converging-diverging (C-D) variable area nozzle (VAN) in military aeroengines is now common, as it can give optimal expansion and control over engine back pressure, for a wide range of engine operations. At higher main combustion temperatures (desired for supercruise), an increase in the nozzle expansion ratio is needed for optimum performance. But changes in the nozzle throat and exit areas affect the visibility of engine hot parts as the diverging section of the nozzle is visible for a full range of view angle from the rear aspect. The solid angle subtended by engine hot parts varies with change in visibility, which affects the aircraft infrared (IR) signature from the rear aspect. This study compares the performances of fixed and variable area nozzles (FAN and VAN) in terms of engine thrust and IR signature of the engine exhaust system in the boresight for the same increase in combustion temperature.

Abstract Gasoline compression ignition (GCI) is a promising combustion technology that can help the commercial transportation sector achieve operational flexibility and meet upcoming criteria pollutant regulations. However, high-pressure fuel injection systems (>1000 bar) are needed to enable GCI and fully realize its benefits compared to conventional diesel combustion. This work is a continuation of previous durability studies that identified three key technical risks after running gasoline-like fuel through a heavy-duty, common rail injection system: (i) cavitation damage to the inlet check valve of the high-pressure pump, (ii) loss of injector fueling capacity, (iii) cavitation erosion of the injector nozzle holes. Upgraded hardware solutions were tested on a consistent 400- to 800-hour NATO durability cycle with the same gasoline-like fuel as previous studies. The upgraded pump showed no signs of abnormal wear or cavitation damage to the inlet check valve.

Abstract The objective of this work is to analyze the signal of a piezoelectric washer installed under the spark plug and to compare the combustion metrics evaluated with such signal to the indexes from a standard piezoelectric sensor for the in-cylinder pressure measurement, considered as the reference. In the first part of the article, the spectrum analysis of the piezoelectric washer pressure trace is proposed. It is demonstrated how such a signal can be used to measure the main combustion and knock indexes. Nevertheless, due to the intrinsic characteristics of the system, the knock index evaluated from the raw pressure trace cannot be directly used to estimate the instantaneous knock intensity. For this reason, a model-based algorithm for Real-Time (RT) application is developed to calculate a corrective factor of the high-frequency content of the signal.