Search Results

This study investigates the physical phenomena that affect a high-altitude airship in the presence of lifting gas losses from the hull. General atmospheric thermodynamics and basic physical principles are adopted to describe the behavior of an airship with envelope failures that generate buoyant gas dispersion or depressurisation phenomena. Overpressure that could grant to maintain some controllability during a large part of the descent is assessed by mean of the thermodynamic model of the envelope in the presence of gas losses. Optimisation of the inflation parameters is provided and the conditions for avoiding dangerous crashes on the ground and the potential recovery of a damaged vehicle, people and its payload. In particular, the requirements for a slow depressurisation is computed by the equilibrium with the atmosphere and then how can it be possible to sustain controlled navigation are determined.

This paper presents a coupled numerical and experimental study of an unconventional wing profile such as cp-180-050-gn (Cambered plate C = 18% T = 5% R = 0.78). This wing profile deals with low speeds. It is not currently used on any aircraft model. Otherwise, it presents interesting performances that can be exploited for the design of low-speed STOL or VTOL aircraft by mean of the very high lift that it can generate and can fit with different uses such as VAWT, cyclorotors drones, which are designed explicitly for low-speed operations. After a preliminary CFD assessment of the wing a complete experimental characterisation also at high angles of attack has been performed. The excellent agreement between CFD and experiments has allowed producing a complete analysis of the behaviour of the wing profile both before and after stall conditions. This study has the objective of analysing the viability of such an unconventional wing in traditional or over-stalling conditions.

This paper is a preliminary step in the direction of the definition of a radically new wing concept that has been conceived to maximize the lift even at low speeds. It is expected to equip new aerial vehicle concepts that aim to compete against helicopters and tilt rotors. They aim achieving very good performance at very low speed (5 to 30 m/s) by mean of an innovative concept of morphing ducted-fan propelled wing that has been designed to maximize the lift force. This paper presents an effective bibliographic analysis of the problem that is a preliminary necessary step in the direction of the preliminary design of the wing. A preliminary CFD evaluation allows demonstrating that the claimed results are in line with the initial expectations. According to the CFD, results it has been produced a preliminary energetic evaluation of the vehicle in a flying car configuration by EMIPS method.

This paper focuses on the calculation methodology of the thrust of a ACHEON propulsion system, which is based on Coanda effect deflection of thrust. It defines a calculation methodology based on integral equations. The proposed methodology allows an effective calculation of the performances and the force applied on the airplane by such a propulsion system. It will also allow an effective design of the nozzle system and will implement also internal elements with an accurate definition of frictional losses. Outstanding results have been obtained together with general rules for implanting ACHEON propulsion inside an aircraft.

One of the best airplanes ever realized by the European Aircraft industry was the Dornier Do 28D Skyservant, an extraordinary STOL light utility aircraft with the capability to carry up to 13 passengers. It has been a simple and rugged aircraft capable also of operating under arduous conditions and very easy and simple maintenance. The architecture of this airplane, which has operated actively for more than 20 years, is very interesting analyzing the implementation of a new propulsion system because of the unusual incorporation of two engines, as well as the two main landing gear shock struts of the faired main landing gear attached to short pylons on either side of the forward fuselage. This unconventional design allows an easy implementation of different propulsion units, such as the history of different experimental versions allowed.

The European project MAAT (Multi-body Advanced Airship for Transport) is producing the design of a transportation system for transport of people and goods, based on the cruiser feeder concept. This project defined novel airship concepts capable of handling safer than in the past hydrogen as a buoyant gas. In particular, it has explored novel variable shape airship concepts, which presents also intrinsic energetic advantages. It has recently conduced to the definition of an innovative design method based on the constructal principle, which applies to large transport vehicles and allows performing an effective energetic optimization and an effective optimization for the specific mission.

It is possible to define a novel optimization method, which aims to overcome the traditional Multidisciplinary Design Optimization. It aims to improve Constructal design method to optimize complex systems such as vehicles. The proposed method is based on the constructal principle and it is articulated in different stages: 1 preliminary top-down design process to ensure that the full system has one of the best configurations for the specified goals (contour conditions for constructal optimization could be stated ensuring an effective optimization at full-system level). 2 constructal optimization of the elemental components of the system to maximize the system performances; 3 eventually a competitive comparison between different configurations choosing the better one. The definition of an optimized flying vehicle (an airship) has been produced an example of this improved design method with the objective of minimizing the energy consumption during flight.

In the general framework of the EU FP7 MAAT project, a novel green air transport architecture is under development. The paper presents the possible architectures for the cabin connections and the transfer modalities for people, crew and freight, for to the European project MAAT. Different architectures have been evaluated setting out to cover the structural and propulsive needs and to enable the transport modes between the Cruiser and the Feeders. The different possibilities are discussed conceptually, by considering the advantages and disadvantages of the presented configurations. The bases for future detailed design and research are established, as through such conceptual study the main parameters are identified and found to affect the general design of both airships and their operability. The aim of this paper is to specify the necessary elements, which are necessary to perform the docking operation by taking into account the prescribed Feeder-Cruiser geometries.

This paper presents the theoretic and numerical background of a recent patent about an innovative Coanda Effect application. This innovative jet is designed to enhance the controllability of the system and to encompass static deflection of the fluid jet but especially the dynamic variation of the Coanda deflection with a very low inertia. This innovative nozzle is formerly named H.O.M.E.R., acronym of “High-speed Orienting Momentum with Enhanced Reversibility”. H.O.M.E.R. constitutes an application based on a dual propeller system. It explains how a vector controllable flux can be produced, with the ability to change angular position dynamically as a function of momentum (or velocity) of the two primitive streams. CFD based simulation in a configuration is provided and main calculations are produced to define the control model. Nozzle design guidelines are provided. The proposed system can be used both for aeronautical naval propulsion and industrial applications.

In 1911 the first fundamental patent of Henry Coanda has been submitted. And 2011 is the centenary of this event for aeronautic history. This paper presents a general review of applied research about Coanda effect nozzles, starting from earlier Coanda works to today's applications. Coanda effect based nozzles are considered, looking at the nozzles which can produce an effective angular deflection of a jet and in particular of a synthetic jet produced by two or more jets.

MAAT project is a large airship project presented to the last European 7 Framework Program Transport including Aeronautics 2011 deadline. MAAT project is an airship based cruiser-feeder transport system. This paper analyzes the criticalities of the project and the way to upfront these problems which have different natures and possible solutions. Most important criticalities are analyzed both on a methodological point of view and on a direct point of view. Enhanced design methodologies are analyzed in depth to analyze problems, upgrade the project design status continuously and to examine different design options and solutions. An innovative design method has been defined to avoid that problems can produce show stoppers and minimize time delays during project definition.

This paper presents a theoretical study on direct drive rotary friction welding process and investigates the possibility of producing an analytical solution of the heat transfer equation, both during the first part of heating process and the second part of the process when the operative temperature of the material at the end of the rod is assumed to be constant and equal to plasticization temperature. The solutions of the set of equations obtained have been compared with some experimental data present in literature [ 9 ] showing a fair agreement The burn-off volume (length in the case of a cylinder) can be estimated. The proposed method is simple, suitable for engineering calculations and can be used to predict the thermal evolution of welded elements and the burn-off volume, to reduce setup difficulties and to realize a more effective control on the process.