Search Results

The reduction of CO2 emissions is one of the most important challenges for the automotive industry to contribute to address global warming. Reducing friction of internal combustion engines (ICEs) is one effective countermeasure to realize this objective. The improvement of engine oil can contribute to reduce fuel consumption by reducing friction between engine parts. Electrification of ICE powertrains increases the overall efficiency of powertrains and reduces the average engine oil temperature during vehicle operation, due to intermittent engine operation. An effective way of reducing engine friction is to lower the viscosity of the engine oil in the low to medium temperature range. This can be accomplished while maintaining viscosity at high temperatures by reducing the base oil viscosity and increasing the viscosity modifier (VM) content to raise the viscosity index (so-called “flat viscosity” concept).

Attribute to high heat transfer rate and less complexity, the Helical coil sub-cooled condenser (HCSCC) can provide the most innovative and unique application for the air conditioning system. In the case of automobiles, reduction in air-conditioning load may diminish the vehicular emission, and power consumption as the air-conditioning load is the most power-consuming components after the engine load. Moreover, to solve the problem, we focus on the helical type heat exchanger. It may play a vital role in reducing the weight and increase the performance of the small engine because of the compact structure and lighter weight. The compressor unit is the most vital component of the refrigeration cycle, but the condenser unit is also one of the most critical devices, and the author tried to reduce the power consumption by enhancing the performance of the condenser.

Nowadays, cornering performance of FSAE (Formula SAE) cars are dramatically improved due to less mass, kinematic developments and tires. In such circumstance, under high speed conditions, aerodynamical devices work better. It had been decided to attach aerodynamical devices that consist of front wing, rear wing, diffuser (floor) and deflector for SR11 (Fig. 1, Table 1), a FSAE car developed by Sophia Racing (Japan). Fig. 1 SR11 Table 1Vehicle configuration of SR11 To start with developing aerodynamical devices, it had been assumed that how they work. Lap time simulation had been done with VI-car-realtime, which shows the laptime could be shorten by 2 seconds of 60 seconds for a usual FSAE endurance course with 60kgf at 60km/h downforce. Dragforce had been assumed to work well while once, it had been supposed to have a bad influence for laptime.

This research focuses on the improvement of torque at the middle engine speed of a motorcycle engine with resonance supercharging. The resonance supercharging intake system is realized with a simple modification to the intake collector geometry. A one-dimensional computational model is employed to simulate the pressure wave propagation and to optimize the configuration of it. The experiments confirmed the increase in the engine torque for the entire operation range and the maximum gain of 33% was achieved at 8500rpm. The resonance effect is further investigated through three-dimensional simulation, in which the intake airflow rate, static pressure distribution are analyzed.

In this paper we propose a new multi-functional steering wheel switch for HVAC and audio systems. This new switch has five buttons on the front side of the spoke area and one button with vibration on the backside of it. Drivers can operate either HVAC or audio functions with the front switches, and HVAC or audio mode can be alternatively selected by pressing the back switch. Since different vibration modes are assigned for the HVAC and audio mode, drivers can also easily recognize which function can be operated. By changing the assignment of the mode in this way, the switch can operate more than 10 functions with 6 buttons allocated on the spoke area. Several kinds of evaluations were performed in order to develop this multi-functional switch. At first, to optimize the positions of the buttons, the behaviors of thumbs and fingers were measured. Also the physical workload of the thumb motion and middle fingers' postures was evaluated when subjects operated the switches.

Temperature distribution as the flame propagated and contacted to the wall of the combustion chamber was measured by real-time holographic interference method, which mainly consisted of an argon-ion laser and a high-speed video camera. The experiment was done with a constant volume chamber and propane-air mixture with several kinds of equivalence ratios. From the experimental results, it can be found that the temperature distribution outside the zone from the surface of the combustion chamber to 0.1mm distance could be measured by counting the number of the interference fringes, but couldn't within this zone because of lacking in the resolution of the used optical system. The experimental results show that the temperature distribution when the heat flux on the wall increases rapidly and when the heat flux shows the maximum value are quite different by the equivalence ratio.

The purpose of this study is to find the suitable working conditions of a Pressure Wave Supercharger (PWS) that is coupled to a gasoline engine experimentally. The working condition is validated by stationary measurements on an engine dynamometer. To achieve an easier system structure, it was examined to use the engine output for driving of PWS. As a result, it was confirmed that the engine coupled with PWS could be driven by making the ratio of the PWS rotor speed and the engine speed constant.

We have developed a rear spoiler with built-in antenna. The spoiler has two features. First, the built-in antenna does not protrude from the vehicle contour and has an improved serviceability. Second, the air flow effect provides the driver with a clearer rear view, resulting in an improved safety. This paper discusses characteristics of the rear spoiler with built-in antenna.

A historical review of Japanese turbocharged diesel engines for heavy duty vehicles is described, and newly developed turbocharged diesel engines of HINO are introduced. The design features of these engines include new turbocharging technologies such as highly backward curved impeller for compressor blade, variable controlled inertia charging and waste gate. Laboratory and field test results demonstrated better fuel economy and improved low speed and transient torque characteristics than the predecessors. Several operational experiences, technical analysis and reliability problems are discussed.

In a diesel engine, the mixing of the fuel spray and in-cylinder air controls rate of beat release during combustion, namely it will determine the thermal efficiency, maximum output and gas or noise emission, etc. Therefore, it is important to measure the droplet size and its volume density distribution in diesel fuel sprays. The optical measuring method, which includes a light scattering and holographic technique, seems the only feasible method for analysing these unsteady characteristics of fuel sprays. The light scattering technique described herein was based upon Mie scattering theory, and the droplet size and volume density distribution of fuel sprays were calculated from the combination of the light extinction and the forward-to-backscattering ratio of Mie scattering intensity. The volume density and droplet size distribution of fuel sprays were obtained from the light intensity distribution on a photograph of fuel sprays.