Search Results

The study of the distribution of the deceleration of vehicles of category M1 when performing various maneuvers is intended to develop methods for assessing the parameters of maneuvering of cars in the study of the circumstances of the occurrence of road accidents. Experimental studies were carried out on passenger cars, which are equipped with automated braking force control systems, for various driving styles. M1 category vehicles were maneuvered on dry asphalt pavement in the range of speeds from 11 to 25 m / s, which is typical for most road traffic accidents. It was found that when braking a vehicle of category M1, longitudinal deceleration increase according to a second-order polynomial dependence in the range of deceleration variation from 1.39 to 5.86 m/s2.

Braking mechanisms have the most variation in performance of all of the elements of the braking system. Instability of braking torques on the wheels of one axle of the vehicle leads to the appearance of the braking forces unevenness, and then- to the vehicle skidding during braking. At one time, the appearance of open-type disc brakes made it possible to reduce the unevenness of the braking forces on the sides of the car due to their higher characteristics of energy intensity and stability. However, the lack of feedback between the left and right disc brakes mounted on the same axle of the vehicle does not allow reducing the unevenness of the braking forces to an acceptable minimum. The authors of the work studied and proposed several systems for automatic reduction of the braking torques unevenness for braking mechanisms mounted on the wheels of one axle.

In the design of gearboxes and transfer boxes of heavy-duty vehicle`s transmissions, sliding bearings are often used as supports for gear wheels. Analysis of the results of statistical processing of gearbox parts failures and transfer boxes of wheeled tractors with a pulling force of 30 kN indicates the need to improve the reliability of the sliding bearings of the gear wheels. Such plain bearings ensure free rotation of the gear wheels in case of the torque transmission absence, and when locked by a clutch, the radial load of the gear wheel is sensed, while operating in the slipping rolling mode. Such units are poorly understood and in the technical literature sources there are no recommendations for their engineering, which often leads to errors when selecting operation gaps and press fitted in gear wheels. The manufacturers of the transmissions assemblies replaced the plain bearings, which in this case are made of metal-ceramic bushes, for roller bearings.

A method of vehicle straight angle motion relative its axial axis by turning the front wheels and simultaneous braking of the external side wheels is offered. The equation describing the condition of four-wheel drive vehicle crab motion is obtained. The purpose of the research is to determine the law of control of torque on the wheels of the car, the realization of which makes crab motion possible. For realization of the aim, the following challenges were solved: the torque difference on the driving wheels (the braking torque on the outside wheel) that provides “crab motion" is determined; an analysis of the operational factors influences and design parameters of the vehicle, on the magnitude of the required torque difference, was conducted.

The dynamic distribution of normal reactions between the axles of the wheeled tractor has a significant impact on the stability against skidding and the wheeled tractor braking effectiveness. At the same time, the clarification of the normal reactions distribution between the axles allows to choose more rational braking forces distribution between the axles. It is shown that the best way to ensure the highest braking efficiency is the braking mode when the rear wheels of the tractor are at the blocking limit. An assessment of the expediency of installing brake mechanisms on only one axle of the tractor was made. The increase of braking efficiency of wheeled tractors with all brake wheels provided that they ensure directional stability is considered. The laws of braking forces distribution between the axles of wheel tractors for different sequence of wheels locking are determined.

One of the reasons for the large number of road accidents on highways in Ukraine [1] is the instability of the braking properties due to the unstable characteristics of the brake mechanisms’ friction pairs. The manufacturer produces new automobiles with installed brake pairs (brake pads and their counter bodies), which have passed long-term tests for the stability of the friction coefficient and braking forces distribution of between the axles. This ensures the compatibility of the friction pairs characteristics for front and rear brake mechanisms according to the criteria of heat resistance. During operation, instead of worn-out brake pads, brake discs and drums, drivers can purchase new ones, manufactured as spare parts. However, in the well-known literature there are no methods that allow to check the compatibility of the friction pairs characteristics for front and rear brake mechanisms according to the criteria of heat resistance.

The solution to the problem of stability of a multi-axle vehicle during braking is connected with the determination of the dynamic distribution of normal road reactions between the axles. To assess the stability of the vehicle is used as an indicator of the stability factor representing the ratio of the stabilizing moment to moment, the perturbing skid. When the values of the stability coefficient is greater than or equal to unity, the movement is stable, and otherwise it is unstable. For a multi-axle vehicle, determining the dynamic normal road reactions on the axles is possible after disclosing the static uncertainty of the physical model of the car, which is a multi-support beam. The solution to this problem involves the use of the "three sigma" rule.

The intensive development of tractor-building industry in the world has led to the widespread use of wheeled tractors and tractor trains in transportations on public highways. This requires an increase of engine capacity and speed of tractor trains, as well as strict demands for their braking systems. The formation of the necessary braking properties of wheeled tractors and tractor trains on their basis should be carried out at the design phase, taking into account a wide range of aggregated machines and tools. Blocking the wheels of the trailer with different sequence of their blocking and blocking the wheels of the tractor has significant impact on the total braking force, deceleration and stability of the tractor train. It is advisable to take this into account when modeling the braking process of a tractor train.

The bulk of automobiles are equipped with ABS currently. Having of automatic devices that prevent vehicle wheels from locking and skidding does not require consideration of the normal reactions on the front and rear vehicle axles wheels’ changes dynamics. However, ABS malfunction is possible for various reasons, and in this case the braking system must provide the safety vehicle braking. To provide this, it is necessary to return to the problem of choosing the rational braking forces distribution between the wheels of the front and rear axles.

New solutions for actual problems of determination the efficient distribution of braking forces between the axles of the vehicle, and the stability and drivability of two-axles vehicles at service braking are received in the thesis. It permitted for the first time to determine the Law of distribution of the braking forces between the axles, that ensuring straight-running stability of two-axle vehicle at service braking, to obtain the ideal characteristics for the braking system of two-axle vehicle at service braking and to determine possible values for the distribution of braking force on the front axle. The drivability criterion at service braking obtained further development; it is offered to use boundary at gripping front or rear wheels angular vehicle acceleration on the road.