Search Results

The Closed-Loop Air REvitalisation System ARES is a regenerative life support system for closed habitats. With regenerative processes the ARES covers the life support functions: 1. Removal of carbon dioxide from the spacecraft atmosphere via a regenerative adsorption/desorption process, 2. Supply of breathable oxygen via electrolysis of water, 3. Catalytic conversion of carbon dioxide with hydrogen to water and methane. ARES will be accommodated in a double ISPR Rack which will contain all main and support functions like power and data handling and process water management. It is foreseen to be installed onboard the International Space Station (ISS) in the Columbus Module in 2013. After an initial technology demonstration phase ARES shall continue to operate thus enhancing the capabilities of the ISS Life Support System as acknowledged by NASA [5]. Due to its regenerative processes ARES will allow a significant reduction of water upload to the ISS.

CryoSat is the first satellite of ESA's Living Planet Programme realised in the framework of the Earth Explorer Opportunity Missions. CryoSat is a radar altimeter mission dedicated to determine trends in the ice masses of the Earth. The overall spacecraft configuration was driven by the budget constraints applicable for the opportunity mission, the high inclination orbit with drifting orbit plane and the stringent stability requirements for the radar altimeter antennas. Innovative thermal design solutions were needed for the following items: The instrument antennas have to comply with very stringent pointing stability requirements. The star trackers need to be mounted at a thermally adverse position and still have to be maintained on low temperature levels.

Metop (METeorological OPerational satellite) is a series of three satellites designed to monitor the climate and improve weather forecasting. This paper describes the thermal analysis, thermal testing performed, and relevant lessons learned. For the thermal analysis campaigns it focuses on: exchange and correlation of reduced thermal mathematical models established in various software formats sizes and content of the models, in particular automatic generation of reduced models from the detailed models uncertainties definitions of thermal interfaces The lessons learned from the thermal testing campaigns apply to: selection of test environment, using solar simulation and/or infra-red techniques selection of test cases based on thermal design driving parameters and/or test chamber capabilities adequate instrumentation (i.e. thermocouples, test heaters) for all critical components (un)expected events e.g.

The Crew Refrigerator/Freezer Racks (RFR) are being developed and built at Astrium Friedrichshafen under ESA contract. The RFR will provide conditioned storage volume for astronaut food during transport in the MPLM and on board the ISS. To support the design of the RFR a thermal model has been established at Astrium in the early project phase using the ESATAN software which is the ESA standard thermal analysis tool. This model has been extended to allow full operational simulation of the RFR during a typical mission scenario. For demonstrating the capabilities of EcosimPro, a state of the art tool to address Environmental Control and Life Support analysis, the same model is built up with EcosimPro. The results are validated by comparing them to those from the ESATAN simulation.

The current ECLS baseline of the International Space Station ISS contains an open oxygen loop. Breathable oxygen, generated by electrolysis of water, is supplied to all habitable modules. The crew of max. 7 astronauts converts the oxygen into metabolic carbon dioxide, which needs to be removed from the ISS atmosphere. Adsorption of CO2 is achieved through molecular sieves, desorption of CO2 is conducted by evacuation into space. This open process needs approx. 1500 kg of water upload mass annually. More than 75 % of this upload mass can be saved, if the open oxygen loop will be closed. This paper outlines the closed loop air revitalization system of Astrium, ARES, which has been successfully tested in closed chamber tests. It demonstrates in detail the technical application of ARES on ISS and outlines the commercial benefits. The second part of the paper describes ARES for a Mars habitat with a closed oxygen and hydrogen loop.

In the range of the Columbus Orbital Facility (COL) program, the European contribution to the International Space Station (ISS), DASA Dornier developed and qualified four new supporting devices for the Environmental Control and Live Support System (ECLSS) as listed below: 1. The Vacuum & Venting Pressure Sensor (VVPS). Based on the Pirani principle, it utilizes the pressure dependence of the gas thermal conductivity. 2. The Humidity Sensor (HS) provides information for the Thermal & Humidity Control System (THC). It works according to the dew point principle, guaranteeing a long stability over at least 10 years. 3. The Air Flow Sensor (AFS), working according to the hot wire anemometer principle, is dedicated to identify low air flow conditions. 4. The Waste Gas Line Shut-Off Valve (WLSOV), a DC motor driven ball type vacuum valve, was adapted to the space station requirements (e.g. noise and micro-g).

Columbus is being built as the European contribution to the International Space Station (ISS) Program. The ECLS subsystem is developed by DaimlerChrysler Aerospace/Dornier under a contract from Alenia Aerospazio. This paper will survey the qualification test results of the Columbus cabin ventilation subjective test conduction up to February 2000.