Search Results

The more electric aircraft (MEA) concept has been attracting attention over recent decades to reduce emissions and fuel consumption. In MEAs, many subsystems that previously used hydraulic or pneumatic power have been replaced by electrical systems, and hence the weight of inverters has significant importance. The weight of inverters is largely attributed to passive filters that reduce the derivative of output voltages dv/dt and electromagnetic interference noises caused by common-mode voltages. To reduce the size of passive filters, multilevel inverters with 5 or more voltage steps are preferred. However, classic multilevel inverters have some challenges to achieve these step numbers without using plural dc power supplies that require massive transformers. In this work, a gradationally controlled voltage (GCV) inverter is proposed for MEAs.

In development of more electric aircraft applications, it is important to discuss aircraft energy management on various level of aircraft operation. This paper presents a computationally efficient optimization model for evaluating flight efficiency on global and interval flight ranges. The model is described as an optimal control problem with an objective functional subjected to state condition and control input constraints along a flight path range. A flight model consists of aircraft point-mass equations of motion including engine and aerodynamic models. The engine model generates the engine thrust and fuel consumption rate for operation condition and the aerodynamic model generates the drag force and lift force of an aircraft for flight conditions. These models is identified by data taken from a published literature as an example. First, approximate optimization process is performed for climb, cruise, decent and approach as each interval range path.

This paper describes the comparison of electromagnetic characteristics of two different superconducting-motor structures for electrified aircraft propulsion systems. Future electrified aircraft demand higher output (over 16 kW/kg) and higher efficiency (> 98%) for their motors in comparison with current ones. To satisfy the demands, two kinds of superconducting motors are dealt in this study: one is partially superconducting motors (PSCMs), made of superconducting field coils and copper armature windings; the other is the fully superconducting motors (FSCMs) made of superconducting field/armature windings. They are cooled at 20 K with liquid hydrogen. We designed these two motors with finite element method to obtain the output density of 16-20 kW/kg for future electrified propulsion systems. We selected 3.0- and 5.0 MW superconducting motors, considering the application to aircraft for almost 180 passengers and 44 MW rated power for take-off.

Current More Electric Aircraft (MEA) utilize Liquid Cooling Systems (LCS) for cooling on-board power electronics. In such LCS, coolant pipes around the structure of the aircraft are used to supply water glycol based coolant to sink heat from power electronics and other heat loads in the electronic bay. The extracted heat is then transferred to ram air through downstream heat exchangers. This paper presents a reliability examination of a proposed alternative Autonomous Air Cooling System (AACS) for a twin engine civil MEA case study. The proposed AACS utilizes cabin air as the coolant which is in turn supplied using the electric Environmental Control System (ECS) within the MEA. The AACS consists of electrical blowers allocated to each heat load which subsequently drive the outflow cabin air through the heat sinks of the power electronics for heat extraction. No additional heat exchanger is required after this stage in which the heated air is directly expelled overboard.

This paper describes the concept of an air/fuel integrated thermal management system, which employs the VCS (Vapor Cycle System) for the refrigeration unit of the ECS (Environment Control System), while exchanging the heat between the VCS refrigerant and the fuel into the engine, and presents a feasibility study to apply the concept to the future all electric aircraft systems. The heat generated in an aircraft is transferred to the ECS heat exchanger by the recirculation of air and exhausted into the ram air. While some aircraft employ the fluid heat transfer loop, the transferred heat is exhausted into the ram air. The usage of ram air for the cooling will increase the ram drag and the fuel consumption, thus, less usage of ram air is preferable. Another source for heat rejection is the fuel. The heat exchange with the fuel does not worsen the fuel consumption, thus, the fuel is a preferable source.

With the growth in onboard electrification referred to the movement of the More Electric Aircraft, or MEA, and constant improvement in ECO standards, aircraft electricity load has continued to soar. The airline and authors have discussed the nature of future aircraft systems in the next two decades, which envisages the further More Electric Aircraft or the All-Electric Aircraft, or AEA, concept helping provide some effective aviation improvements. The operators, pilots and maintenance crews anticipate improved operability, ease of maintenance and fuel saving, while meetings depends for high reliability and safety by electrification. As part of initial progress, the authors approach the methodology of energy management for aircraft systems.

To improve an energy optimization issue of ECS for MEA, we propose our concept in which ACS is replaced with VCS. A VCS is generally evaluated as auxiliary or limited cooling system of an aircraft. Cooling demand of commercial aircraft usually becomes large due to ventilation air at hot day conditions. In case of using conventional VCS for whole cooling demand, the ECS becomes too heavy as aircraft equipment. Though ACS's light weight is advantageous, the issue that VCS will be available for aircraft ECS is important for saving energy. ECS of commercial aircraft should work for three basic functions, i.e. pressurization, ventilation, and temperature control. The three functions of the ECS for bleed-less type of MEA can be distributed among equipment of the ECS. MDFAC works for pressurization and ventilation. Therefore, we should select appropriate system for only temperature control.

With airlines increasingly directing their attention to operating costs and environmental initiatives, the More Electric Architecture for Aircraft and Propulsion (MEAAP) is emerging as a viable solution for improved performance and eco-friendly aircraft operations. This paper focuses on electric taxiing that does not require the use of jet engines or the auxiliary power unit (APU) during taxiing, either from the departure gate to take-off or from landing to the arrival gate. Many researchers and engineers are considering introducing electric taxiing systems as part of efforts to improve airport conditions. To help cut aircraft emissions at airports, MEAAP seeks to introduce an electric taxiing system that would reduce the duration for which engines and APUs operate while on the ground. Given this goal, the aircraft electrical system deployed for use at airports must rely on a power source other than the jet engines or APU.

The authors are currently developing the MEE (More Electric Engine) electric motor-driven fuel pump system for aircraft engines. The electric fuel system will contribute to the reduction of engine power extraction to drive the fuel pump; thus, an improvement in engine efficiency will be expected. In addition, the engine system reliability will be improved by introducing advanced electric architecture, and the reduction of hydraulic components, fuel tubes and fittings is effective to enhance the maintainability of the engine. Although it is considered that the MEE electric fuel system will realize several benefits, there are technical challenges to introduce such new electric system into aircraft. One of the key technical challenges is to construct a redundant and simplified electric fuel system, because continuous operation of the fuel pump system is crucial for aircraft safety.

This paper describes study for fuel pump system configuration which is suitable for the MEE (More Electric Engine) system. The MEE is a new engine system concept which intends engine efficiency improvement, which results in a reduction of engine fuel burn and CO₂ emissions from aircraft. Final configuration of the MEE will contain various engine systems, such as fuel system, oil system and electric generating system, but we focus on high efficiency fuel systems as a first step of the MEE development. The MEE is an advanced engine control technology utilizing recent innovations in electric motors and power electronics and replacing conventional engine accessories, such as AGB-driven pumps and hydraulic actuators with electric motor-driven pumps and EMAs (Electro-Mechanical Actuators), which are powered by generators. Because fuel pump system configuration is a key for the MEE fuel system, we conducted comparison of several pump systems and adopted a fixed displacement gear pump system.

This paper describes a concept related to fault-tolerant design for a redundant motor control system. The design comprises components driven by an electric motor, a motor controller, and a power source, referred to as the More Electric Aero Engine (or MEE). The MEE dramatically improves the engine efficiency and reduces fuel burn and CO2 emissions. However, the MEE system must demonstrate that it can ensure engine safety and reliability before it can take the place of conventional systems. The proposed unique redundant system presented in this paper incorporates Active-Active control and multi-winding motors. Engine fuel flow is controlled by the motor speed control of the MEE electric fuel pump, which uses this redundant system. This concept provides a solution for helping to ensure engine safety and reliability, since it enables a complete one-fail operational engine fuel system for the MEE. Another key technology for the MEE system involves a power generating solution.