Search Results

A novel containerization technique that satisfies Planetary Protection Category V requirements has been developed and demonstrated on the mock-up of the Mars Sample Return Container. The proposed approach uses explosive welding with a sacrificial layer and cut-through-the-seam techniques. The technology produces a container that is free from Martian contaminants on an atomic level. The containerization technique can be used on any celestial body that may support life. A major advantage of the proposed technology is the possibility of very fast (less than an hour) verification of both containment and cleanliness with typical metallurgical laboratory equipment. No separate biological verification is required. In addition to Category V requirements, the proposed container presents a surface that is clean from any, even non-viable organisms, and any molecular fragments of biological origin that are unique to Mars or any other celestial body other than Earth.

The Cassini spacecraft, NASA's mission to investigate the Saturn system, has undergone a system-level thermal balance test program to permit verification of the engineering subsystem thermal designs in the simulated worst-case environments. Additionally, other objectives such as functional checkouts, collection of thermal data for analytical model adjustment, vacuum drying of propellant tanks, and flight temperature transducer verification were also completed. In the interest of cost and schedule, transient off-Sunpoint conditions were not tested. The testing demonstrated that the required system resources such as heater power and radiator area were adequate for all engineering subsystems. The only changes required from the results were related to the operation of some of the subsystems. In the instance of the thruster cluster assemblies, allowable flight temperature limits were exceeded for the assumed operational environment.

The Cassini spacecraft, NASA's mission to investigate the Saturn system, has undergone a system-level thermal balance test program to permit verification of the science instrument thermal designs in the simulated worst-case environments. Additionally, other objectives such as functional checkout, collection of thermal data for analytical model adjustment, and flight temperature transducer verification were also attained. In the interest of cost and schedule, transient off-sunpoint conditions were not tested. The test demonstrated that the required system resources such as heater power and radiator area were adequate. In the instance of the Cosmic Dust Analyzer, allowable flight temperature limits were violated, but this problem is being addressed without a significant impact to system resources or thermal design robustness. Finally, the thermal acceptability of a black Kapton “sock” was demonstrated for the magnetometer boom.

The Mars Pathfinder spacecraft which will be launched in December 1996 features an active cooling system for controlling the temperature of the spacecraft. This will be the first time that such a mechanical pump cooling system is used on an interplanetary or long duration flight (over two weeks) in space. The major element of the cooling system is the Integrated Pump Assembly (IPA). It uses centrifugal pumps to circulate liquid freon to transfer heat from spacecraft electronics to an external radiator. The IPA consists of redundant pumps, motor control electronics, thermal control valves, check valves, and an accumulator. The design and flight implementation of this pump assembly were accomplished in less than two years. This paper describes the design, fabrication, assembly, and testing of the IPA.

The Mars Pathfinder (MPF) Spacecraft, scheduled for a December 1996 launch to Mars, uses a mechanically pumped loop to transfer dissipated heat from the insulated lander electronics to an external radiator. This paper discusses the tradeoffs performed before choosing a mechanical pumped loop as the thermal control system for MPF. It describes the analysis, tradeoffs, design, and predicted performance of this system. The various development tests performed are discussed, along with the current status of this cooling system. Finally, some thoughts on the development of mechanically pumped loops for future spacecraft are presented.