Search Results

Industries have been increasingly adopting AI based computer vision models for automated asset defect inspection. A challenging aspect within this domain is the inspection of composite assets consisting of multiple components, each of which is an object of interest for inspection, with its own structural variations, defect types and signatures. Training vision models for such an inspection process involves numerous challenges around data acquisition such as insufficient volume, inconsistent positioning, poor quality and imbalance owing to inadequate image samples of infrequently occurring defects. Approaches to augmenting the dataset through Standard Data Augmentation (SDA) methods (image transformations such as flipping, rotation, contrast adjustment, etc.) have had limited success. When dealing with images of such composite assets, it is challenging to correct the data imbalance at the component level using image transformations as they apply to all the components within an image.

Bio-composites have gained significant attention within the aerospace industry due to their potential as a sustainable solution that addresses the demand for lightweight materials with reduced environmental impact. These materials blend natural fibers sourced from renewable origins, such as plant-based fibers, with polymer matrices to fabricate composite materials that exhibit desirable mechanical properties and environmental friendliness. The aerospace sector's growing interest in bio-composites originates from those composites’ capacity to mitigate the industry's carbon footprint and decrease dependence on finite resources. This study aims to investigate the suitability of utilizing plant derived flax fabric/PLA (polylactic acid) matrix-based bio-composites in aerospace applications, as well as the recyclability potential of these composites in the circular manufacturing economy.

Thermo-mechanical fatigue and natural aging due to environmental conditions are difficult to simulate in an actual test with the advanced fiber-reinforced composites, where their fatigue and aging behavior is little understood. Predictive modeling of these processes is challenging. Thermal cyclic tests take a prohibitively long time, although the strain rate effect can be scaled well for accelerating the mechanical stress cycles. Glass fabric composites have important applications in aircraft and spacecraft structures including microwave transparent structures, impact-resistant parts of wing, fuselage deck and many other load bearing structures. Often additional additively manufactured features and coating on glass fabric composites are employed for thermal and anti-corrosion insulations. In this paper we employ a thermo-mechanical fatigue model based accelerated fatigue test and life prediction under hot to cold cycles.

Additive manufacturing (AM) is currently the most sought-after production process for any complex shaped geometries commonly encountered in Aerospace Industries. Although, several technologies of AM do exits, the most popular one is the Direct Metal Laser Sintering (DMLS) owing to its high versatility in terms of precision of geometries of components and guarantee of highest levels of reduction in production time. Further, metallic component of any complex shape such as Gas Turbine Blades can also be developed by this technique. In the light of the above, the present work focuses on development of iron silicon carbide (Fe-SiC) complex part for ball screw assembly using DMLS technique. The optimized process parameters, hardness and wear resistance of the developed iron-SiC composite will be reported. Further, since the material chosen is a metallic composite one, the effect of SiC on the thermal stresses generated during the DMLS processing of Fe-SiC composite will also be discussed.

The aerospace industry's unceasing quest for lightweight materials with exceptional mechanical properties has led to groundbreaking advancements in material technology. Historically, aluminum alloys and their composites have held the throne in aerospace applications owing to their remarkable strength-to-weight ratio. However, recent developments have catapulted magnesium and its alloys into the spotlight. Magnesium possesses two-thirds of aluminum's density, making it a tantalizing option for applications with regard to weight-sensitive aerospace components. To further enhance magnesium's mechanical properties, researchers have delved into the realm of metal matrix composites (MMCs), using reinforcements such as Alumina, Silicon carbide, Boron carbide and Titanium carbide.

In the aerospace industry, large aircrafts employ composite materials for making complex structures which not only reduces weight and cost but also reduces the number of joints. Irrespective of that joining of structures cannot be avoided and for that mechanical fasteners such as rivets and bolts are employed along with adhesive bonding. Further, in recent years natural fibers have been studied extensively for their numerous advantages and have already been made into several automotive applications. Keeping these current trends in mind an attempt is made to investigate the joining behavior of natural fiber composites experimentally. So in this study, the ultimate failure load, bearing strength and the dominating failure mode of jute-hemp fabric-reinforced polymeric composites joined using single and double-bolted configurations are studied.

The objective of this paper is to analyze a complete fuselage of an airplane made of composite materials. The analysis presented includes designing a 3D fuselage structure in which parameters are calculated using various stress and deformation scenarios. Static numerical results propose a composite fuselage structure to reduce stress and deformation levels by 45 and 33% compared to an equivalent (existing) aluminum fuselage. This work is to continue with specific characteristics of the composite and considerations to more realistic loading conditions (dynamism, impact, fatigue). A complete study should suggest converting flying vehicles to composites, to increase performances, minimize weights, and improve payloads.

Aluminium composites are remarkably used in automotive, aerospace, and agricultural sectors because of their lightweight with definable mechanical properties. The stir casting route was followed to fabricate cylindrical samples with base aluminium alloy LM4, LM4/SiC, LM4/Al2O3, and LM4/SiC/Al2O3. The tensile strength, compressive strength, hardness, and micro-structural analysis were performed on samples and Finite element analysis (FEA) was adopted to predict the failure modes of composites. The composites experimental results were found to be in line with the FEA results, however, the LM4/SiC/Al2O3 revealed better results on the mechanical properties when compared with other composite configurations. The mechanical properties improvement like hardness 5%-11%, tensile strength 10.26%-20.67%, compressive strength 15.19% - 32.58% and 71.52 - 82.1% reduction in dimension have been achieved in LM4/SiC/Al2O3 composite comparing to base metal.

Employing the stir casting process, a unique hybrid composites were fabricated, using A356 as the matrix and reinforced with ZrSiO4 and TiB2 particulates. The produced specimens were initially in their as-cast state. Following that, the reinforcement particle concentrations were changed 2 and 4 weight percentages (wt%) of ZrSiO4 and keeping a constant 6 wt% of TiB2. Three samples were exposed to dry sliding conditions at room temperature using a tribometer. Two applied loads of magnitude 10N and 50N and a sliding velocity of 1m/s and 2m/s were selected as testing parameters. After measuring the wear rate (WR) and the coefficient of friction (COF), the worn-out pin surfaces were examined using scanning electron microscopy (SEM).

Additive manufacturing (AM) is a common way to make things faster in manufacturing era today. A mix of polypropylene (PP) and carbon fiber (CF) blended filament is strong and bonded well. Fused deposition modeling (FDM) is a common way to make things. For this research, made the test samples using a mix of PP and CF filament through FDM printer by varying infill speed of 40 meters per sec 50 meters per sec and 60 meters per sec in sequence. The tested these samples on a tribometer testing machine that slides them against a surface with different forces (from 5 to 20 N) and speeds (from 1 to 4 meters per sec). The findings of the study revealed a consistent linear increase in both wear rate and coefficient of friction across every sample analyzed. Nevertheless, noteworthy variations emerged when evaluating the samples subjected to the 40m/s infill speed test.

The requirement for lightweight, high-performance materials with higher wear resistance, which is critical in industries such as aerospace, automotive, and consumer-related sectors, has fueled the development of particle reinforced metal matrix composites (PRMCs). These materials are an appealing alternative for a broad variety of scientific and technological applications due to their remarkable mechanical qualities and low cost. The primary goal of developing metal matrix composite materials is to combine the favorable properties of metals and ceramics. This study included several experimental experiments to explore the behavior of stir-cast composites made of aluminum grade 6063 with varying amounts of SiC, Al2O3, and TiO2 reinforcements.

Abstract In this study, we have investigated the microstructural characteristics, the mechanical properties, and the dry sliding wear behavior of a ceramic coating consisting of zirconia (ZrO2) and alumina (Al2O3) deposited by flame spraying. A series of wear tests were carried out under a variety of loads and at two different sliding speeds. The evaluation included an examination of the coating microstructure, microhardness, coefficient of friction (COF), and wear resistance of the flame-sprayed coating. The results showed that the coatings had a perfectly structured micro-architecture and were metallurgically bonded to the substrate. The Al2O3 coating exhibited a fine granular structure with pores and oxides. The microstructure of Al2O3-10 wt.% ZrO2, on the other hand, showed a blocky structure with a uniform distribution of ZrO2 inclusions in the composite coating.

Bimetal composite pipe has higher strength and is more corrosion and high temperature resistant compared to single metal pipe, making it a new type of pipe that is being gradually applied to important industrial fields such as aviation and aerospace manufacturing. To study the hydraulic forming mechanism of bimetal composite pipes, the forming process is divided into three stages: liner pipe elastic–plastic deformation, base pipe loading, and unloading. The stress and strain relation between the liner and base pipe during the gradual increase in hydraulic pressure is analyzed, and the range of selected internal pressure required for composite pipe formation and the relation between residual contact pressure and internal pressure for the liner–base pipe interface are obtained.

This specification covers an aluminum alloy in the form of sheet 0.010 to 0.249 inch (0.25 to 6.32 mm), inclusive, in nominal thickness, clad on two sides (see 8.5).

The aim of this research is to investigate the effect of cutting temperature on the post-machining performance of “carbon fiber-reinforced polymer” (CFRP), providing insights into how temperature variations during machining influence the material’s mechanical properties and structural integrity. First, cutting temperatures generated during machining were monitored and used to categorize specimens. These specimens were then subjected to control heating at various temperatures, simulating the range of cutting conditions. Subsequently, the heated specimens were left to cool naturally in ambient air. A comprehensive tensile experiment was conducted on these specimens to assess the impact on mechanical behavior. The tensile properties, including elastic modulus and maximum tensile stress, were analyzed and compared across the different temperature.

Abstract Nylon polymer with an optimal blend of Kevlar, fiberglass, and high-speed, high temperature (HSHT) Fiberglass offers improved characteristics such as flexural strength, wear resistance, electrical insulation, shock absorption, and a low friction coefficient. For this reason, the polymer composite manufactured by combining HSHT, Kevlar, and fiberglass with nylon as base material will expand the uses of nylon in the aerospace, automotive, and other industrial applications related to ergonomic tools, assembly trays, and so forth. The proposed work was carried out to investigate the continuous fiber reinforcement (CFR) in nylon polymer using a dual extrusion system. Twenty experimental runs were designed using a face-centered central composite design (FCCD) approach to analyze the influence of significant factors such as reinforcement material, infill pattern, and fiber angle on the fabricated specimen as per American Society for Testing Materials (ASTM) standards.

This document (Technical Specification) gives information about qualification rules and the relation between the different specification parts involved, such as the Technical Specification (TS), Material Specification (MS), and Purchasing Specification (PS). The link to the material qualification and qualified products is presented.