Refine Your Search

Date

Date

Topic

Topic

Tools and equipment Parts Manufacturing processes Automotive Globalization Hardware Vehicle E E System Diagnostic Standards Committee

Search Results

Viewing 1 to 20 of 22
12Next >Last >>
Sort by published
Standard

OBD-II Scan Tool: First Generation Protocols
2023-12-13
CURRENT
J1978-1_202312
SAE J1978-1 specifies a complementary set of functions to be provided by an OBD-II scan tool. These functions provide complete, efficient, and safe access to all regulated OBD (on-board diagnostic) services on any vehicle which complies to SAE J1978-1 The SAE J1978-1 content of this document is intended to satisfy the requirements of an OBD-II scan tool as required by current U.S. on-board diagnostic (OBD) regulations. This document specifies: A means of establishing communications between an OBD-equipped vehicle and an OBD-II scan tool. A set of diagnostic services to be provided by an OBD-II scan tool in order to exercise the services defined in SAE J1979 and SAE J1979-2. The presentation of the SAE J1978 document family, where SAE J1978-1 covers first generation protocol functionality defined in SAE J1979, and SAE J1978-2 covers second generation protocol functionality defined in SAE J1979-2.
Standard

OBD-II Scan Tool
2022-05-26
CURRENT
J1978_202205
SAE J1978/ISO 15031-4 specifies a complementary set of functions to be provided by an OBD-II scan tool. These functions provide complete, efficient, and safe access to all regulated OBD (on-board diagnostic) services on any vehicle which is compliant with SAE J1978/ISO 15031-4. The SAE J1978 content of this document is intended to satisfy the requirements of an OBD-II scan tool as required by current U.S. on-board diagnostic (OBD) regulations. The ISO 15031-4 content of this document is intended to satisfy the requirements of OBD requirements in countries other than the U.S., and includes functionality not required or not allowed in the U.S. This document specifies: A means of establishing communications between an OBD-equipped vehicle and an OBD-II scan tool. A set of diagnostic services to be provided by an OBD-II scan tool in order to exercise the services defined in SAE J1979/ISO 15031-5.
Standard

SAE J2450 Supplemental Training Document
2019-10-31
CURRENT
J2450/1_201910
This supplement, which is a living document, is meant to provide both clients and translation suppliers with some suggestions for integrating SAE J2450 into their business practices. It is intended for the use of clients, trainers who wish to develop new evaluators, and those who wish to self-train.
Standard

Recommended Practice for Pass-Thru Vehicle Programming
2019-07-29
CURRENT
J2534_201907
This SAE Recommended Practice provides the framework to allow reprogramming software applications from all vehicle manufacturers the flexibility to work with multiple vehicle data link interface tools from multiple tool suppliers. This system enables each vehicle manufacturer to control the programming sequence for electronic control units (ECU’s) in their vehicles, but allows a single set of programming hardware and vehicle interface to be used to program modules for all vehicle manufacturers. This document does not limit the hardware possibilities for the connection between the PC used for the software application and the tool (e.g., RS-232, RS-485, USB, Ethernet…). Tool suppliers are free to choose the hardware interface appropriate for their tool. The goal of this document is to ensure that reprogramming software from any vehicle manufacturer is compatible with hardware supplied by any tool manufacturer. The U.S.
Standard

General Motors UART Serial Data Communications
2019-05-20
CURRENT
J2740_201905
This Technical Information Report defines the General Motors UART Serial Data Communications Bus, commonly referred to as GM UART. This document should be used in conjunction with SAE J2534-2 in order to enhance an SAE J2534 interface to also provide the capability to program ECUs with GM UART. SAE J2534-1 includes requirements for an interface that can be used to program certain emission-related Electronic Control Units (ECUs) as required by U.S. regulations, and SAE J2534-2 defines enhanced functionality required to program additional ECUs not mandated by current U.S. regulations. The purpose of this document is to specify the requirements necessary to implement GM UART in an enhanced SAE J2534 interface intended for use by independent automotive service facilities to program GM UART ECUs in General Motors vehicles.
Standard

Translation Quality Metric
2016-08-17
CURRENT
J2450_201608
This SAE Standard is applicable to translations of automotive service information into any target language. The metric may be applied regardless of the source language or the method of translation (i.e., human translation, computer assisted translation or machine translation). Note that the current version of the metric does not measure errors in style, making it unsuitable for evaluations of material in which style is important (e.g., owner's manuals or marketing literature). The metric can be expanded to accommodate style and other requirements of particular new media.
Standard

SAE J2450 Supplemental Training Document
2008-05-13
HISTORICAL
J2450/1_200805
This supplement, which is a living document, is meant to provide both clients and translation suppliers with some suggestions for integrating SAE J2450 into their business practices. It is intended for the use of clients, trainers who wish to develop new evaluators, and those who wish to self-train.
Standard

SAE J1850 Verification Test Procedures
2006-06-05
HISTORICAL
J1699/1_200606
This SAE Recommended Practice recommends test methods, test procedures, and specific test parameters to help verify that vehicles and test tools can communicate using the SAE J1850. This document only verifies the portion of SAE J1850 that is used for OBD-II communications. The term “test tool” is synonymous with OBD-II Scan tool.
Standard

General Motors UART Serial Data Communications
2005-12-19
HISTORICAL
J2740_200512
This Technical Information Report defines the General Motors UART Serial Data Communications Bus, commonly referred to as GM UART. This document should be used in conjunction with SAE J2534-2 in order to enhance an SAE J2534 interface to also provide the capability to program ECUs with GM UART. SAE J2534-1 includes requirements for an interface that can be used to program certain emission-related Electronic Control Units (ECUs) as required by U.S. regulations, and SAE J2534-2 defines enhanced functionality required to program additional ECUs not mandated by current U.S. regulations. The purpose of this document is to specify the requirements necessary to implement GM UART in an enhanced SAE J2534 interface intended for use by independent automotive service facilities to program GM UART ECUs in General Motors vehicles.
Standard

Translation Quality Metric
2005-08-22
HISTORICAL
J2450_200508
This SAE Standard is applicable to translations of automotive service information into any target language. The metric may be applied regardless of the source language or the method of translation (i.e., human translation, computer assisted translation or machine translation). Note that the current version of the metric does not measure errors in style, making it unsuitable for evaluations of material in which style is important (e.g., owner's manuals or marketing literature). The metric can be expanded to accommodate style and other requirements of particular new media.
Standard

Recommended Practice for Pass-Thru Vehicle Programming
2002-02-28
HISTORICAL
J2534_200202
This SAE Recommended Practice provides the framework to allow reprogramming software applications from all vehicle manufacturers the flexibility to work with multiple vehicle data link interface tools from multiple tool suppliers. This system enables each vehicle manufacturer to control the programming sequence for electronic control units (ECU’s) in their vehicles, but allows a single set of programming hardware and vehicle interface to be used to program modules for all vehicle manufacturers. This document does not limit the hardware possibilities for the connection between the PC used for the software application and the tool (e.g., RS-232, RS-485, USB, Ethernet…). Tool suppliers are free to choose the hardware interface appropriate for their tool. The goal of this document is to ensure that reprogramming software from any vehicle manufacturer is compatible with hardware supplied by any tool manufacturer. The U.S.
Standard

Electrical/Electronic Systems Diagnostic Terms, Definitions, Abbreviations, and Acronyms
1998-05-01
HISTORICAL
J1930_199805
This SAE Recommended Practice is applicable to all light-duty gasoline and diesel passenger vehicles and trucks, and to heavy-duty gasoline vehicles. Specific applications of this document include diagnostic, service and repair manuals, bulletins and updates, training manuals, repair data bases, underhood emission labels, and emission certification applications. This document focuses on diagnostic terms applicable to electrical/electronic systems, and therefore also contains related mechanical terms, definitions, abbreviations, and acronyms. Even though the use and appropriate updating of this document is strongly encouraged, nothing in this document should be construed as prohibiting the introduction of a term, abbreviation, or acronym not covered by this document. Certain terms have already been in common use and are readily understood by manufacturers and technicians, but do not follow the methodology of this document.
Standard

OBD-II Related SAE Specification Verification Test Procedures1
1998-01-01
HISTORICAL
J1699/2_199801
This SAE Recommended Practice recommends test methods, test procedures, and specific test parameters to help verify that vehicles and test tools can communicate using SAE J1962. These test procedures are to be used whenever SAE J1850 communication parameters need to be verified. However, all specific details for testing are not specified, e.g., sample size, environment, vibration, etc.
Standard

DIAGNOSTIC CONNECTOR
1993-06-01
HISTORICAL
J1962_199306
The SAE J1962 diagnostic connector consists of two mating connectors, the vehicle connector (see Figure 1) and the test equipment connector (see Figure 2). This document: a Defines the functional requirements for the vehicle connector. These functional requirements are separated into three principal areas: connector location/access, connector design, and connector terminal assignments. b Defines the functional requirements for the test equipment connector. These functional requirements are separated into two principal areas: connector design and connector terminal assignments.
12Next >Last >>
X