Search Results

The isentropic efficiency estimation of small radial turbines is an important aspect of turbocharger performance evaluation. Because of inaccuracies in measuring the outlet temperature due to the non-homogeneous flow field distribution, it is common practice to refer to the thermomechanical efficiency, defined as the product of mechanical and turbine isentropic efficiencies. This paper proposes a method for the indirect evaluation of turbine isentropic efficiency through specific experimental tests. In particular, the evaluation of friction losses in the bearings can be assessed thanks to experimental investigations in quasi-adiabatic condition. By maintaining the turbine inlet temperature and the average temperature of lubricating oil and water-cooling circuit equal to the compressor outlet temperature, a negligible heat transfer between turbine and compressor can be achieved.

Turbochargers are still one of the most common solutions to improve internal combustion engines performance. The correct evaluation of turbochargers characteristic maps is one of the main issues to achieve a good matching with internal combustion engines. In a 1D procedure the accuracy of performance maps constitutes the basis of the turbocharger matching with the engine. The classical quasi-steady approach assumes that compressor and turbine characteristic maps are evaluated under the hypothesis of adiabatic turbocharger behavior. The aim of the paper is the investigation of the effect of heat transfer phenomena on the measured turbocharger maps. A model to correct compressor efficiency evaluated starting from measured data, thus removing the heat transfer effects, is proposed. The compressor steady flow behavior has been analyzed through specific tests performed at the test rig for components of propulsion systems of the University of Genoa, under various heat transfer conditions.

In the last few years, the effect of diabatic test conditions on compressor performance maps has been widely investigated, leading some Authors to propose different correction models. The accuracy of turbocharger performance map constitute the basis for the tuning and validation of a numerical method, usually adopted for the prediction of engine-turbocharger matching. Actually, it is common practice in automotive applications to use simulation codes, which can either require measured compression ratio and efficiency maps as input values or calculate them “on the fly” throughout specific sub-models integrated in the numerical procedures. Therefore, the ability to correct the measured performance maps taking into account internal heat transfer would allow the implementation of commercial simulation codes used for engine-turbocharger matching calculations.

Turbocharging is playing today a fundamental role not only to improve automotive engine performance, but also to reduce fuel consumption and exhaust emissions for both Spark Ignition and Diesel engines. Dedicated experimental investigations on turbochargers are therefore necessary to assess a better understanding of its performance. The availability of experimental information on turbocharger steady flow performance is an essential requirement to optimize the engine-turbocharger matching, which is usually achieved by means of simulation models. This aspect is even more important when referred to the turbine efficiency, since its swallowing capacity can be accurately evaluated through the measurement of mass flow rate, inlet temperature and pressure ratio across the machine.

In the last few years, the effect of diabatic test conditions on compressor performance maps has been widely investigated leading some Authors to propose different correction models. The aim of the paper is to investigate the effect of heat transfer phenomena on the experimental definition of turbocharger maps, focusing on turbine performance. An experimental investigation on a small turbocharger for automotive application has been carried out and presented. The study focused onto the effects of internal heat transfer on turbine thermomechanical efficiency. The experimental campaign was developed considering the effect of different heat transfer state by varying turbine inlet temperature, oil and coolant temperature and compressor inlet pressure. An original model previously developed by the Authors is adopted for the correction of compressor steady flow maps.

In the last few years, the effect of diabatic test conditions on compressor performance maps has been widely investigated leading some authors to propose different correction models. The accuracy of performance maps constitutes the basis of the turbocharger matching with the engine, for which 1D procedures are more and more adopted. The classical quasi-steady approach generally used is based on the employment of compressor and turbine characteristic maps assuming adiabatic turbocharger conditions. The aim of the paper is to investigate the effect of heat transfer phenomena on the experimental definition of turbocharger maps, focusing on compressor performance. This work was developed within a collaboration between the Polytechnic School of the University of Genoa and CRITT M2A. The compressor steady flow behavior was analyzed through tests performed on different test rigs operating at the University of Genoa and at CRITT M2A, under various heat transfer conditions.