Refine Your Search

Date

Date

Topic

Topic

Bodies and Structures Textile and Flexible Plastics Committee Technical review Air conditioning Interior noise

Search Results

Viewing 1 to 20 of 41
123Next >Last >>
Sort by published
Standard

Test Method for Determining Blocking Resistance and Associated Characteristics of Automotive Trim Materials
2023-02-20
CURRENT
J912_202302
This test method is designed to indicate the degree of surface tackiness, color transfer, loss of embossment, and surface marring when two trim materials are placed face to face under specific conditions of time, temperature, and pressure. These specific conditions are not dictated in this test procedure but will be found in the material standards which govern each type of trim material to be tested.
Standard

Procedure for Visual Evaluation of Interior and Exterior Automotive Trim
2022-10-04
CURRENT
J361_202210
This SAE Recommended Practice applies to parts and materials used in vehicle manufacture which are intended to be acceptable color matches to a specified standard. This document is intended for use with parts or materials which are opaque or nearly so. Materials covered by this document include topcoat paint finishes, interior soft trim, interior and exterior hard trim, and exterior film and flexible trim. This practice requires judgments by observers with a minimum of normal color vision and preferably superior as rated with the FM-100 hue test as specified in ASTM E1499.
Standard

Fiberboard Test Procedure
2022-08-26
CURRENT
J315_202208
This SAE Standard provides test methods for determining the critical characteristics of basic or finished fiberboard products. Where applicable, methods of test developed by SAE and ASTM have been referenced.
Standard

Outdoor Weathering of Exterior Materials
2022-05-18
CURRENT
J1976_202205
This test method specifies the exposure racks, black boxes, and instrumentation, which shall be used for the outdoor weathering of materials for automotive exterior application.
Standard

Procedure for Visual Evaluation of Interior and Exterior Automotive Trim
2021-12-30
HISTORICAL
J361_202112
This SAE Recommended Practice applies to parts and materials used in vehicle manufacture which are intended to be acceptable color matches to a specified standard. This document is intended for use with parts or materials which are opaque or nearly so. Materials covered by this document include topcoat paint finishes, interior soft trim, interior and exterior hard trim, and exterior film and flexible trim. This practice requires judgments by observers with a minimum of normal color vision and preferably superior as rated with the FM-100 Hue Test as specified in ASTM E1499, Guide for Selection, Evaluation, and Training of Observers.
Standard

Flammability of Polymeric Interior Materials - Horizontal Test Method
2019-08-08
CURRENT
J369_201908
This SAE Standard pertains to automotive vehicles and off-road, self-propelled work machines used in construction, general purpose industrial, agriculture, forestry, and specialized mining machinery. This standard does not address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this document to establish safety and health practices and determine the applicability of regulatory limitations prior to use. Fire testing is inherently hazardous. Adequate safeguards for personnel and property shall be employed when conducting this test.
Standard

Standard Classification System for Fiberboards
2014-06-04
HISTORICAL
J1323_201406
This SAE Standard provides a means for specifying or describing the pertinent properties of fiberboards for automotive applications. The materials normally specified by this standard are defined in SAE J947. The test methods commonly used for fiberboards are defined in SAE J315.
Standard

Determination of the Fogging Characteristics of Interior Automotive Materials
2013-12-06
WIP
J1756
1.1 This recommended practice describes two methods for determining the tendency of interior materials used in automobiles and other vehicles to (a) produce a light scattering deposit (fog) on a glass surface, or (b) produce a measurable deposit (mass) on aluminum foil. 1.2 This document is applicable to the measurement of a fog condensate on glass or aluminum foil surfaces within the limits of the test conditions. 1.3 It is the responsibility of the user of this document to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to its use.
Standard

Flammability of Polymeric Interior Materials - Horizontal Test Method
2013-06-20
HISTORICAL
J369_201306
This SAE Standard pertains to automotive vehicles and off-road, self-propelled work machines used in construction, general purpose industrial, agriculture, forestry, and specialized mining machinery. This standard does not address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this document to establish safety and health practices and determine the applicability of regulatory limitations prior to use. Fire testing is inherently hazardous. Adequate safeguards for personnel and property shall be employed when conducting this test.
Standard

Accelerated Exposure of Automotive Exterior Materials Using a Controlled Irradiance Air-Cooled Xenon-Arc Apparatus
2012-11-19
CURRENT
J2019_201211
This SAE Standard specifies the operating procedures for a controlled irradiance, air-cooled xenon-arc apparatus used for the accelerated exposure of various automotive exterior materials. The sample preparation, test durations, and performance evaluation procedures are covered in material specifications of the different automotive manufacturers.
Standard

Test Method for Determining Blocking Resistance and Associated Characteristics of Automotive Trim Materials
2012-10-15
HISTORICAL
J912_201210
This test method is designed to indicate the degree of surface tackiness, color transfer, loss of embossment, and surface marring when two trim materials are placed face to face under specific conditions of time, temperature, and pressure. These specific conditions are not dictated in this test procedure but will be found in the material standards which govern each type of trim material to be tested.
123Next >Last >>
X