Standard
Brass, Naval, Bars and Rods, 60.5Cu - 38.5Zn - 0.75Sn, Hard Temper (H04)
2023-10-16
CURRENT
AMS4612L
This specification covers a copper alloy (naval brass) in the form of bars and rods.
Search Results
Standard
Brass Forgings, Free Cutting 60Cu - 2.0Pb - 37.5Zn As Forged (M10)
2022-09-30
CURRENT
AMS4614J
This specification covers one type of brass in the form of forgings and forging stock.
Standard
Aluminum Alloy, Rolled or Cold Finished Bars, Rods, and Wire 4.0Cu - 0.70Mn - 0.60Mg - 0.50Si (2017; -T4, -T451) Solution Heat Treated
2022-07-06
CURRENT
AMS4118M
This specification covers an aluminum alloy in the form of bars, rods, and wire 8.000 inches (203.20 mm) and under in nominal diameter and for squares, hexagons, octagons, and rectangles 50 in2 (322 cm2) and under in cross-sectional area and 8.000 inches (203.20 mm) and under in least distance between parallel sides (see 8.7).
Standard
Hardness and Conductivity Inspection of Wrought Aluminum Alloy Parts
2022-02-16
WIP
AMS2658E
This specification establishes hardness and electrical conductivity acceptance criteria of finished or semi-finished parts of wrought aluminum alloys.
Standard
Minimization of High Temperature Oxidation, Aluminum Alloy Heat Treatment
2020-02-05
CURRENT
ARP7500
This recommended practice provides recommendations for minimizing high temperature oxidation (HTO) during the heat treatment of aluminum alloy products and parts. HTO leads to deterioration of properties.
Standard
Heat Treatment of Wrought Copper Beryllium Alloy Parts
2019-04-30
CURRENT
AMS2728C
This specification establishes the requirements for heat treatment of wrought copper beryllium parts (See 1.2.2 and 8.2.1) by users or by their vendors or subcontractors.
Standard
Heat Treatment of Wrought Aluminum Alloy Parts
2019-04-08
HISTORICAL
AMS2770P
This specification specifies the engineering requirements for heat treatment, by part fabricators (users) or their vendors or subcontractors, of parts (see 8.6.1). It also covers heat treatment by warehouses or distributors converting raw material from one temper to another temper (see 1.3 and 8.5). It covers the following aluminum alloys: 1100, 2014, 2017, 2024, 2098, 2117, 2124, 2195, 2219, 2224, 3003, 5052, 6013, 6061, 6063, 6066, 6951, 7049, 7050, 7075, 7149, 7178, 7249, 7475
Standard
Bearings, Sintered Metal Powder 89Cu – 10Sn Oil Impregnated
2018-08-23
CURRENT
AMS4805F
This specification covers one type of sintered metal powder in the form of oil-impregnated bearings.
Standard
Bearings, Leaded Bronze 80Cu – 10Pb – 10Sn Steel Back
2018-04-19
CURRENT
AMS4827F
This specification covers bearings of a leaded bronze cast on one or both faces of a steel backing.
Standard
Bearings, Leaded Copper 70Cu – 28.5Pb Steel Back
2018-04-19
CURRENT
AMS4820F
This specification covers bearings of leaded copper cast on one or both faces of a steel backing.
Standard
Bearings, Babbitt 91Sn – 4.5Sb – 4.5Cu
2018-04-19
CURRENT
AMS4800F
This specification covers bearings of a tin alloy cast on one or both faces of a steel or bronze backing.
Standard
Hardness and Conductivity Inspection of Wrought Aluminum Alloy Parts
2016-03-28
CURRENT
AMS2658D
This specification establishes hardness and electrical conductivity acceptance criteria of finished or semi-finished parts of wrought aluminum alloys.
Standard
Heat Treatment of Wrought Aluminum Alloy Parts
2015-09-03
HISTORICAL
AMS2770N
This specification specifies the engineering requirements for heat treatment, by part fabricators (users) or their vendors or subcontractors, of parts (see 8.8.1). It also covers heat treatment by warehouses or distributors converting raw material from one temper to another temper (see 1.3 and 8.5). It covers the following aluminum alloys: 1100, 2004, 2014, 2017, 2024, 2098, 2117, 2124, 2219, 2224, 3003, 5052, 6013, 6061, 6063, 6066, 6951, 7049, 7050, 7075, 7149, 7178, 7249, 7475
Standard
Heat Treatment of Wrought Aluminum Alloy Parts
2015-05-26
HISTORICAL
AMS2770M
This specification specifies the engineering requirements for heat treatment, by part fabricators (users) or their vendors or subcontractors, of parts (See 8.8.1). It also covers heat treatment by warehouses or distributors converting raw material from one temper to another temper (See 1.3 and 8.5). It covers the following aluminum alloys: 1100, 2004, 2014, 2017, 2024, 2098, 2117, 2124, 2219, 2224, 3003, 5052, 6013, 6061, 6063, 6066, 6951, 7049, 7050, 7075, 7149, 7178, 7249, 7475
Standard
Bearings, Babbitt-Coated Leaded-Bronze Steel Back
2015-04-07
CURRENT
AMS4824E
This specification covers bearings of a leaded bronze cast on one or both faces of a steel backing with a layer of babbitt metal cast on the leaded bronze.
Standard
Aluminum Alloy, Rolled or Cold Finished Bars, Rods, and Wire 4.0Cu - 0.70Mn - 0.60Mg - 0.50Si (2017; -T4, -T451) Solution Heat Treated
2014-05-19
HISTORICAL
AMS4118L
This specification covers an aluminum alloy in the form of bars, rods, and wire.
Standard
Heat Treatment of Wrought Aluminum Alloy Parts
2014-05-05
HISTORICAL
AMS2770L
This specification specifies the engineering requirements for heat treatment, by part fabricators (users) or their vendors or subcontractors, of parts (See 8.8.1). It also covers heat treatment by warehouses or distributors converting raw material from one temper to another temper (See 1.3 and 8.5). It covers the following aluminum alloys: 1100, 2004, 2014, 2017, 2024, 2098, 2117, 2124, 2219, 2224, 3003, 5052, 6013, 6061, 6063, 6066, 6951, 7049, 7050, 7075, 7149, 7178, 7249, 7475
Standard
Aluminum Alloy Alclad 7178, Plate and Sheet
2014-02-14
CURRENT
AMSQQA250/15C
This specification covers the specific requirements for 7178 aluminum alloy alclad plate and sheet; the general requirements are covered in AMS-QQ-A-250. The plate and sheet covered by this specification shall be an integral composite product consisting of a heat-treatable aluminum alloy (7178) core with thin layers of an aluminum alloy (7072) anodic to the core and of approximately equal thickness bonded to both surfaces.
Standard
Aluminum Alloy 7178, Plate and Sheet
2014-02-14
CURRENT
AMSQQA250/14B
This specification covers the specific requirements for 7178 aluminum alloy plate and sheet material; the general requirements are covered in AMS-QQ-A-250.
Standard
Aluminum Alloy, 7178-T76, Plate and Sheet Improved Exfoliation Resistant
2014-02-14
CURRENT
AMSQQA250/21C
This specification covers the specific requirements for improved exfoliation-resistant aluminum alloy, 7178-T76 sheet and 7178-T7651 plate.
