Search Results

Standard

Recommended Practices for CNG Powered Medium and Heavy-Duty Trucks

2018-02-12

CURRENT

J2406_201802

This SAE Recommended Practice provides guidance for the construction, operation, and maintenance of CNG powered medium and heavy-duty trucks. The intent of this document is to cover TRUCKS (6350 kg (14 001 gvw pounds) and above) and specifically excludes passenger vehicles such as: buses, recreational vehicles, motor homes and/or passenger vehicles which may incorporate a truck chassis in their construction.

Standard

Liquefied Natural Gas (LNG) Vehicle Metering and Dispensing Systems - Truck and Bus

2018-02-12

CURRENT

J2645_201802

This SAE Recommended Practice applies to Liquefied Natural Gas Vehicle Fuel. The purpose of this document is to provide information on issues that are important to consider regarding LNG metering and dispensing systems.

Standard

Liquefied Natural Gas (LNG) Vehicle Fuel

2018-02-12

CURRENT

J2699_201802

This SAE Information Report applies to liquefied natural gas used as vehicle fuel and requires LNG producers to provide the required information on the fuel composition and its “dispense by” date.

Standard

Recommended Practice for LNG Medium and Heavy-Duty Powered Vehicles

2018-02-12

CURRENT

J2343_201802

This SAE Recommended Practice provides guidance for the construction, operation, and maintenance of LNG powered medium, heavy-duty vehicles and all LNG vehicles used for public transit or commercial applications.

Standard

Clearance Envelopes for Six-Bolt, Eight-Bolt, and Rear Truck Transmission Mounted Power Takeoffs

2017-11-03

CURRENT

J772_201711

This SAE Recommended Practice is intended as a guide toward standard practice but may be subject to frequent change to keep pace with experience and technical advances.

Standard

Vehicle Idle Gear Rattle Evaluation Procedure

2017-09-19

CURRENT

J2555_201709

This SAE Standard describes a procedure to be used to evaluate a disturbance known as “idle gear rattle” which can exist in vehicles equipped with manual transmissions and clutches. Other types of noises associated with operation at idle are also briefly described.

Standard

Flywheel Dimensions for Truck and Bus Applications

2017-09-19

CURRENT

J1857_201709

Although not limited to, these flywheels are normally used on trucks considered as Medium-Duty (Class 6 and 7), as well as Heavy-Duty (Class 8) trucks.

Standard

Clutch Dimensions for Truck and Bus Applications

2017-08-14

CURRENT

J1806_201708

Although not limited to, these clutches are normally used on trucks considered as Medium-Duty (Class 6 and 7), as well as Heavy-Duty (Class 8).

Standard

Pull-Type Clutch Transmission Installation Dimensions

2012-11-09

CURRENT

J1463_201211

This SAE Recommended Practice documents the typical transmission interface dimensions that are used with 14-in and larger pull-type clutches. See Figure 1.

Standard

Automotive Pull-Type Clutch Terminology

2012-11-09

CURRENT

J1479_201211

This SAE Standard describes the terms or names of the parts, characteristics, and parameters of automotive pull-type clutches used in trucks, and of vehicle apparatus or components related to the pull-type clutch.

Standard

Liquefied Natural Gas (LNG) Vehicle Fuel

2011-07-08

HISTORICAL

J2699_201107

This SAE Information Report applies to liquefied natural gas used as vehicle fuel and requires LNG producers to provide the required information on the fuel composition and its “dispense by” date.

Standard

Liquefied Natural Gas (LNG) Vehicle Metering and Dispensing Systems—Truck and Bus

2009-04-02

HISTORICAL

J2645_200904

This SAE Recommended Practice applies to Liquefied Natural Gas Vehicle Fuel. The purpose of this document is to provide information on issues that are important to consider regarding LNG metering and dispensing systems.

Standard

Recommended Practice for LNG Medium and Heavy-Duty Powered Vehicles

2008-07-01

HISTORICAL

J2343_200807

This SAE Recommended Practice provides guidance for the construction, operation, and maintenance of LNG powered medium, heavy-duty vehicles and all LNG vehicles used for public transit or commercial applications.

Standard

Engine Retarder Dynamometer Test and Capability Rating Procedure

2005-12-12

HISTORICAL

J1621_200512

This SAE Recommended Practice has been adopted by SAE to specify: a A basis for net engine retarder power rating b Reference inlet air test conditions c A method for correcting observed engine retarder power to reference conditions d A method for determining net engine retarder power with a dynamometer

Standard

Clearance Envelopes for Six-Bolt, Eight-Bolt, and Rear Truck Transmission Mounted Power Takeoffs

2004-07-23

HISTORICAL

J772_200407

This SAE Recommended Practice is intended as a guide toward standard practice but may be subject to frequent change to keep pace with experience and technical advances.

Standard

Pull-Type Clutch Transmission Installation Dimensions

2003-04-24

HISTORICAL

J1463_200304

This SAE Recommended Practice documents the typical transmission interface dimensions that are used with 14-in and larger pull-type clutches. See Figure 1.

Standard

Flywheel Dimensions for Truck and Bus Applications

2003-04-23

HISTORICAL

J1857_200304

Although not limited to, these flywheels are normally used on trucks considered as Medium-Duty (Class 6 and 7), as well as Heavy-Duty (Class 8) trucks.

Standard

Clutch Requirements for High-Torque Truck and Bus Engines

2002-07-17

HISTORICAL

J2408_200207

Although not limited to, these clutch requirements are normally used on trucks considered as Heavy Duty (Class 8).

Standard

Recommended Practices for CNG Powered Medium and Heavy-Duty Trucks

2002-03-13

HISTORICAL

J2406_200203

This SAE Recommended Practice provides guidance for the construction, operation, and maintenance of CNG powered medium and heavy-duty trucks. The intent of this document is to cover TRUCKS (6350 kg (14 001 gvw pounds) and above) and specifically excludes passenger vehicles such as: buses, recreational vehicles, motor homes and/or passenger vehicles which may incorporate a truck chassis in their construction.

Standard

Vehicle Idle Gear Rattle Evaluation Procedure

2000-11-01

HISTORICAL

J2555_200011

This SAE Standard describes a procedure to be used to evaluate a disturbance known as “idle gear rattle” which can exist in vehicles equipped with manual transmissions and clutches. Other types of noises associated with operation at idle are also briefly described.