Search Results

Develop procurement specification for new Visually Indicated Tight Fittings for up to 5080 PSI applications

This SAE Aerospace Information Report (AIR) presents reference information for use in preparing detailed specifications and other documents. The intent is to have a master reference document containing frequently required tabulations of information, such as the meaning of abbreviations, the spelled out wording of acronyms, the definition of terms, etc. so that such tabulations need not be repeated in recommended practice documents describing how to prepare technical documents. This document is intended to provide references in the field of fluid system components for space applications. Space applications include spacecraft, such as satellites, space stations, launch vehicles and space shuttles, and servicing equipment and components used for ground systems and launching and for servicing in space. Fluid system components include couplings, fittings, hose and tubing assemblies.

To provide information regarding a unique failure mode and alternate solutions for consideration by application designers.

This SAE Aerospace Standard (AS) defines the requirements for a threadless, flexible, high conductive, self-bonding coupling assembly which, when installed on defined ferrules, provides a flexible connection for joining ducting and components in pressurized fluid systems. The assembled coupling is designed to provide interchangeability of parts and components between qualified manufacturers for use from -65 to +265 °F at 130 psi nominal operating pressures and for the service life of the aircraft system. FAR 23.954, FAR 25.603, FAR 25.605, FAR 25.609, FAR 25.613, FAR 25.901, FAR 25.954, and FAR 25.981 certification requirements have identified the need for high current capable flexible fluid assembled couplings. The coupling assembly does not require inspection or maintenance to remain current capable for the life of the aircraft.

This specification covers a synthetic rubber in the form of a non-rigid, smooth bore, noncollapsing-type hose.

This specification covers a synthetic rubber in the form of a nonrigid, smooth bore, noncollapsing-type hose.

This specification covers a synthetic rubber in the form of a soft wall, smooth bore, collapsing-type hose.

This specification establishes requirements for automatic shutoff, quick-disconnect coupling assemblies for fuel and oil lines.

This document establishes the requirements for aircraft, hydraulic couplings, self-sealing one side only, for use in Type II hydraulic systems (-65 to +275 °F temperature range) as defined by MIL-H-5440. The purpose being to connect a hose or tube to a standard MS33656, MS33514, or MIL-F-85421, or MIL-F-85720 fitting, and to provide the self-sealing feature on the hose or tube side of the connection.

This SAE Aerospace Standard (AS) defines the requirements for a threadless, flexible, self-bonding coupling assembly which, when installed on machined fixed-cavity ferrules, provides a flexible connection for joining tubing and components in aircraft fuel, vent, or other systems. This assembled coupling, hereafter referred to as the assembly, is designed for use from -65 to +400 °F and at 125 psig nominal operating pressure. AS1650 was not designed for the new certification requirements for flammable leakage zones and fuel tanks for lightning protection and assembly redundancy. As such, their use and installation may require additional efforts and equipment to support new FAA CFR compliance. The AS7510 flexible coupling should be the preferred coupling for use in flammable leakage zones and fuel tanks that require service life and functionality for lightning protection and part redundancy.

Remove unsused (developed / unreleased) part standards. The part standards are AS5840, AS5841, AS5842, and AS5843.

This SAE Aerospace Standard (AS) specifies test methods for tube-fitting assemblies used in aircraft fluid systems in the following pressure classes: B (1500 psi or 10500 kPa), D (3000 psi or 21000 kPa), E (4000 psi or 28000 kPa), and J (5000 psi or 35000 kPa) and in temperature types I (-65 to 160 °F or -55 to 70 °C), II (-65 to 275 °F or -55 to 135 °C), and III (-65 to 400 °F or -55 to 200 °C) of AS2001. This document applies each time that it is referred to in a procurement specification or other definition document. Fluids and materials used for the tests are listed in Section 2.

This specification defines the requirements for a threaded rigid coupling assembly, which utilizes ferrule type machined tube end fittings, to join tubing and components in aircraft fuel, vent, and other systems. This coupling assembly is designed for use from −65 to 200 °F and at 125 psig operating pressure.

This SAE Aerospace Standard (AS) defines the requirements for a threadless, flexible, self-bonding coupling assembly which, when installed on machined fixed cavity ferrules, provides a flexible connection for joining tubing and components in aircraft fuel, vent or other systems. This assembled coupling, hereafter referred to as the assembly, and is designed for use from −65 to +400 °F and at 125 psig nominal operating pressure. AS1650 was not designed for the new certification requirements for flammable leakage zones and fuel tanks for lightning protection and assembly redundancy. As such their use and installation may require additional efforts and equipment to support new FAA CFR compliance. The AS7510 flexible coupling should be the preferred coupling for use in flammable leakage zones and fuel tanks that require service life and functionality for lightning protection and part redundancy.

This SAE Aerospace Standard (AS) defines the requirements for a threadless, flexible, high conductive self-bonding coupling assembly which, when installed on defined ferrules, provides a flexible connection for joining ducting and components in pressurized fluid systems. The assembled coupling is designed to provide interchangeability of parts and components between qualified manufacturers for use from -65 to +265 °F at 130 psi nominal operating pressures and for the service life of the aircraft system. FAR 23.954, FAR 25.901, FAR 25.954 and FAR 25.981 certification requirements have identified the need for high current capable flexible fluid assembled couplings. The coupling assembly does not require inspection and maintenance to remain current capable for the life of the aircraft.

This specification covers the requirements for aircraft hydraulic, self-sealing, quick disconnect couplings for use in 8000 lbf/in2 (gage) lightweight hydraulic systems.

This SAE Aerospace Standard (AS) defines the requirements for a threadless, flexible, self-bonding coupling assembly which, when installed on machined fixed cavity ferrules, provides a flexible connection for joining tubing and components in aircraft fuel, vent or other systems. This assembled coupling, hereafter referred to as the assembly, and is designed for use from −65 to +400 °F and at 125 psig nominal operating pressure.

This aerospace specification defines the requirements for a threadless, flexible, conductive, self-bonding coupling assembly which, when installed on fixed cavity ferrules, provides a flexible, current carrying connection for joining tubing and components in aircraft fuel, vent and other systems. The assembled coupling is designed to provide interchangeability of parts and components between qualified manufacturers for the service life of the aircraft system. The assembled coupling is for use from -65 to +200 °F at nominal operating pressures (125 psig for -08 through -64 and 30 psig for -72 through -88). This aerospace specification is a departure from prior qualification practices for assembled couplings. Prior practice sought to validate this type of assembled coupling design by conducting a sequence of tests on sets of coupling assemblies. There were multiple test sequences and each was conducted on a different set of coupling assemblies.

This SAE Aerospace Standard (AS) establishes the requirements for port preparation, installation, and removal procedure for AS5550 fitting assembly and AS5865 fitting reducer assembly, and is applicable when specified on engineering drawings, or in procurement documents.

This SAE Aerospace Standard provides the essential minimum design, installation and removal standard for MA2111, MA2112, MA2113, and MA2119 adapters, and is applicable when specified on engineering drawings or in procurement documents.