Standard
Magnesium Alloy Welding Wire, 9.0Al - 2.0Zn (AZ92A)
2024-05-17
CURRENT
AMS4395G
This specification covers a magnesium alloy in the form of welding wire (see 8.5).
Search Results
Standard
Aluminum Alloy, Plate (7140-T7651) 6.6Zn - 1.8Cu - 2.0Mg - 0.10Zr Solution Heat Treated, Stress Relieved, and Overaged
2024-05-17
CURRENT
AMS4408B
This specification covers an aluminum alloy in the form of plate 4.000 to 10.000 inches (101.6 to 254.0 mm), inclusive, in nominal thickness (see 8.5).
Standard
Dendrite Arm Spacing of Structural Aircraft Quality D357 Aluminum Alloy Castings, Determination and Acceptance of
2024-05-09
CURRENT
ARP1947D
This document covers the recommended practice for determining the acceptability of the dendrite arm spacing (DAS) of D357-T6 aluminum alloy castings required to have tensile strength not lower than 50 ksi (345 MPa).
Standard
Aluminum Alloy, Centrifugal Castings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (709.0-T61) Hot Isostatically Pressed, Solution and Precipitation Heat Treated
2024-02-27
CURRENT
AMS4406B
This specification covers an aluminum alloy (see 8.5) in the form of centrifugal castings.
Standard
Aluminum Alloy, Plate 3.5Cu - 1.0Li - 0.40Mg - 0.35Mn - 0.45Ag - 0.12Zr (2050-T84) Solution Heat Treated, Stress Relieved, and Artificially Aged
2023-12-20
CURRENT
AMS4413C
This specification covers an aluminum-lithium alloy in the form of plate 0.500 to 8.000 inches (12.70 to 203.20 mm), inclusive, in thickness (see 8.5).
Standard
Aluminum Alloy, Die and Hand Forgings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7175-T74) Solution and Precipitation Heat Treated
2023-12-13
CURRENT
AMS4149F
This specification covers an aluminum alloy in the form of die and hand forgings 6.000 inches (152.00 mm) and under in nominal thickness at time of heat treatment (see 8.6).
Standard
Aluminum Alloy Sheet and Plate, 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr, 7075: (-T73 Sheet, -T7351 Plate), Solution Heat Treated and Overaged
2023-11-10
CURRENT
AMS4078L
This specification covers an aluminum alloy in the form of sheet and plate over 0.039 to 4.000 inches (over 0.991 to 101.60 mm), inclusive, in thickness (see 8.6).
Standard
Brass, Naval, Bars and Rods, 60.5Cu - 38.5Zn - 0.75Sn, Hard Temper (H04)
2023-10-16
CURRENT
AMS4612L
This specification covers a copper alloy (naval brass) in the form of bars and rods.
Standard
Aluminum Alloy, Drawn, Round, Seamless, Tubing 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-O) Close Tolerance, Annealed
2023-08-01
CURRENT
AMS4079J
This specification covers an aluminum alloy in the form of drawn, round, seamless tubing with wall thickness of 0.018 to 0.500 inch (0.46 to 12.70 mm), inclusive (see 8.6).
Standard
Aluminum Alloy, Drawn Seamless Tubing 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-O) Annealed
2023-08-01
CURRENT
AMS4080R
This specification covers an aluminum alloy in the form of drawn seamless tubing in the annealed (O) condition. This specification covers products from 0.018 to 0.500 inch (0.46 to 12.70 mm) in wall thickness (see 8.6).
Standard
Heat Treatment of Aluminum Alloy Raw Materials
2023-03-08
CURRENT
AMS2772H
This specification covers requirements and recommendations for the heat treatment of wrought aluminum alloy raw materials (see 2.2.1) by producers. It supersedes AMS-H-6088 and replaces MIL-H-6088.
Standard
Silver Alloy, Brazing Filler Metal 54Ag - 40Cu - 5.0Zn - 1.0Ni 1325 to 1575 °F (718 to 857 °C) Solidus-Liquidus Range
2023-01-17
CURRENT
AMS4772L
This specification covers a silver alloy in the form of wire, rod, sheet, strip, foil, pig, powder, shot, and chips and a viscous mixture (paste) of powder in a suitable binder.
Standard
Aluminum Alloy, Plate 7.9Zn - 1.2Cu - 2.1Mg - 0.10Zr (7097-T7651) Solution Heat Treated, Stress Relieved, and Overaged
2022-12-16
CURRENT
AMS4365A
This specification covers an aluminum alloy in the form of plate from 3.000 to 8.000 inches (76.20 to 203.20 mm) in thickness (see 8.5).
Standard
Aluminum Alloy, Plate (2297-T87) 2.8Cu - 1.5Li - 0.30Mn - 0.12Zr Solution Heat Treated, Stretched, and Artificially Aged
2022-12-07
CURRENT
AMS4330E
This specification covers an aluminum alloy in the form of plate 1.500 to 6.000 inches (38.1 to 152.40 mm) thick (see 8.5).
Standard
Aluminum Alloy, Plate 5.0Cu - 0.4Mn - 0.5Mg - 0.4Ag (2139-T84) Solution Heat Treated, Cold Worked, and Artificially Aged
2022-10-13
CURRENT
AMS4468A
This specification covers an aluminum alloy in the form of plate with nominal thickness from 1.000 to 5.000 inches (25.40 to 127.00 mm), inclusive (see 8.5).
Standard
Aluminum Alloy Plate (2624-T39) 4.1Cu - 1.4Mg - 0.6Mn Solution Heat Treated, Cold Worked and Naturally Aged
2022-10-13
CURRENT
AMS4473B
This specification covers an aluminum alloy in the form of plate 0.750 to 1.500 inch (19.05 to 38.10 mm), inclusive, in nominal thickness (see 8.5).
Standard
Copper Alloy, Wire 65Cu - 35Zn Annealed (O61)
2022-10-13
CURRENT
AMS4712H
This specification covers a copper-zinc alloy (brass) in the form of wire.
Standard
Brass Forgings, Free Cutting 60Cu - 2.0Pb - 37.5Zn As Forged (M10)
2022-09-30
CURRENT
AMS4614J
This specification covers one type of brass in the form of forgings and forging stock.
Standard
Castings, Sand, Magnesium Alloy 1.5Ag - 2.1Di - 0.08Cu - 0.70Zr (EQ21A - T6) Solution and Precipitation Heat Treated
2022-09-13
WIP
AMS4417D
This specification covers a magnesium alloy in the form of sand castings.
Standard
Gold Wire and Ribbon 99.97Au Annealed
2022-09-13
WIP
AMS7731E
This specification covers pure gold in the form of wire 0.005 to 0.040 inch (0.012 to 1.000 mm) inclusive, in nominal diameter, and ribbon 0.002 to 0.051 inch (0.05 to 1.28 mm) inclusive, in nominal thickness (see 8.5).
