Standard
Motor Vehicle Glazing - Electrical Circuits
2021-09-01
CURRENT
J216_202109
This SAE Recommended Practice establishes limits for electrical circuits on motor vehicle safety glazing materials.
Search Results
Standard
Automotive Safety Glazing Materials
2021-07-16
CURRENT
J673_202107
This SAE Recommended Practice is a guidance document, which covers current safety glazing materials applicable for use in motor vehicles and motor vehicle equipment. Nominal specifications for thickness, flatness, curvature, size, and fabrication details are included. This guidance document does not precede or replace customer specifications and requirements.
Standard
Intrusion Resistance of Safety Glazing Systems for Road Vehicles
2020-10-19
CURRENT
J2568_202010
This SAE Recommended Practice specifies an intrusion resistance test method for glazing systems installed in motor vehicles. Intrusion resistance performance is determined not solely by the glazing but also by the glazing attachment to the vehicle and by the vehicle structure. Therefore, the glazing/attachment/vehicle structure must be tested as a single unit. This test determines intrusion resistance only. The test applies to those materials that meet the requirements for use as safety glazing materials as specified in ANSI/SAE Z26.1 or other applicable standards. The test applies to all installation locations.
Standard
Standard for Safety Glazing Materials for Glazing Motor Vehicles and Motor Vehicle Equipment Operating on Land Highways - Safety Standard
2019-05-28
CURRENT
J3097Z26_201905
Specifications, test methods, and usage provisions for safety glazing materials used for glazing of motor vehicles and motor vehicle equipment operating on land highways.
Standard
Plastic Motor Vehicle Safety Glazing - Tolerances and Fabrication Details
2019-04-11
CURRENT
J1691_201904
This SAE Recommended Practice is intended to cover plastic safety glazing for use in motor vehicles and motor vehicle equipment. Nominal specifications for thickness, flatness, curvature, size, and fabrication details are presented principally for the guidance of body engineers and designers. For additional information on plastic safety glazing materials for use in motor vehicles and motor vehicle equipment, please refer to SAE J673.
Standard
Test Procedure for Determining the Resistance of Safety-Glazing Materials, of which One Surface is Plastic, to Simulated Weathering
2019-04-11
HISTORICAL
J2081_201904
This SAE Recommended Practice determines whether plastic and glass-plastic safety glazing materials will successfully withstand exposure to simulated weathering conditions.
Standard
Automotive Safety Glazing Materials
2015-06-18
HISTORICAL
J673_201506
This SAE Recommended Practice is intended to cover current safety glazing practice applicable to safety glazing for use in motor vehicles and motor vehicle equipment. Nominal specifications for thickness, flatness, curvature, size, and fabrication details are included principally for the guidance of body engineers and designers.
Standard
Safety Glazing Materials - Motor Vehicles and Motor Vehicle Equipment
2013-09-23
CURRENT
J674_201309
All safety glazing materials used in motor vehicles and motor vehicle equipment operating on land highways should comply with the requirements of the American National Standard, ANSI/SAE Z-26.1. The American National Standard for Safety Glazing Materials for Glazing Motor Vehicles and Motor Vehicle Equipment Operating on Land Highways—Safety Standard, ANSI/SAE Z-26.1-1996 is the latest complete updated version and is referred to hereafter as “the safety standard.” This SAE Recommended Practice is not intended to preclude references to any governmental law, ordinance, or regulation which might apply to the glazing of motor vehicles and motor vehicle equipment operating on land highways.
Standard
Intrusion Resistance of Safety Glazing Systems for Road Vehicles
2011-06-30
HISTORICAL
J2568_201106
This SAE Recommended Practice specifies an intrusion resistance test method for glazing systems installed in motor vehicles. Intrusion resistance performance is determined not solely by the glazing but also by the glazing attachment to the vehicle and by the vehicle structure. Therefore, the glazing/ attachment/vehicle structure must be tested as a single unit. This test determines intrusion resistance only. The test applies to those materials that meet the requirements for use as safety glazing materials as specified in Safety Standard ANSI/SAE Z26.1 or other applicable standards. The test applies to all installation locations.
Standard
Motor Vehicle Glazing—Electrical Circuits
2010-01-20
HISTORICAL
J216_201001
This SAE Recommended Practice establishes limits for electrical circuits on motor vehicle safety glazing materials.
Standard
Test Procedure for Determining the Resistance of Safety-Glazing Materials, of which One Surface is Plastic, to Simulated Weathering
2007-05-29
HISTORICAL
J2081_200705
This SAE Recommended Practice determines whether plastic and glass-plastic safety glazing materials will successfully withstand exposure to simulated weathering conditions.
Standard
Plastic Motor Vehicle Safety Glazing—Tolerances and Fabrication Details
2007-02-07
HISTORICAL
J1691_200702
This SAE Recommended Practice is intended to cover plastic safety glazing for use in motor vehicles and motor vehicle equipment. Nominal specifications for thickness, flatness, curvature, size, and fabrication details are presented principally for the guidance of body engineers and designers. For additional information on plastic safety glazing materials for use in motor vehicles and motor vehicle equipment, please see SAE J674.
Standard
Automotive Safety Glasses
2005-10-12
HISTORICAL
J673_200510
This SAE Recommended Practice is intended to cover current safety glazing practice applicable to safety glasses for use in motor vehicles and motor vehicle equipment. Nominal specifications for thickness, flatness, curvature, size, and fabrication details are included principally for the guidance of body engineers and designers. For additional information on safety glazing materials for use in motor vehicles and motor vehicle equipment, see SAE J674.
Standard
Safety Glazing Materials—Motor Vehicles and Motor Vehicle Equipment
2005-08-22
HISTORICAL
J674_200508
All safety glazing materials used in motor vehicles and motor vehicle equipment operating on land highways should comply with the requirements of the American National Standard, ANSI/SAE Z-26.1. The American National Standard for Safety Glazing Materials for Glazing Motor Vehicles and Motor Vehicle Equipment Operating on Land Highways—Safety Standard, ANSI/SAE Z-26.1-1996 is the latest complete updated version and is referred to hereafter as “the safety standard.” This SAE Recommended Practice is not intended to preclude references to any governmental law, ordinance, or regulation which might apply to the glazing of motor vehicles and motor vehicle equipment operating on land highways.
Standard
Intrusion Resistance of Safety Glazing Systems for Road Vehicles
2003-02-12
HISTORICAL
J2568_200302
This SAE Recommended Practice specifies an intrusion resistance test method for glazing systems installed in motor vehicles. Intrusion resistance performance is determined not solely by the glazing but also by the glazing attachment to the vehicle and by the vehicle structure. Therefore, the glazing/ attachment /vehicle structure must be tested as a single unit. This test determines intrusion resistance only. The test applies to those materials that meet the requirements for use as safety glazing materials as specified in Safety Standard ANSI/SAE Z26.1 or other applicable standards. The test applies to all installation locations.
Standard
Intrusion Resistance of Safety Glazing Systems for Road Vehicles
2001-04-24
HISTORICAL
J2568_200104
This SAE Recommended Practice specifies an intrusion resistance test method for glazing systems installed in motor vehicles. Intrusion resistance performance is determined not solely by the glazing but also by the glazing attachment to the vehicle and by the vehicle structure. Therefore, the glazing/ attachment /vehicle structure must be tested as a single unit. This test determines intrusion resistance only. The test applies to those materials that meet the requirements for use as safety glazing materials as specified in Safety Standard ANSI/SAE Z26.1 or other applicable standards. The test applies to all installation locations.
Standard
Motor Vehicle Glazing—Electrical Circuits
1999-03-09
HISTORICAL
J216_199903
This SAE Recommended Practice establishes limits for electrical circuits on motor vehicle safety glazing materials.
Standard
Test Procedure for Determining the Resistance of Safety-glazing Materials, of Which One Surface is Plastic, to Simulated Weathering
1997-08-01
HISTORICAL
J2081_199708
This SAE Recommended Practice determines whether plastic and glass-plastic safety glazing materials will successfully withstand exposure to simulated weathering conditions.
Standard
STATIONARY SAFETY GLAZING REPLACEMENT
1997-07-01
HISTORICAL
J1556_199707
This SAE Recommended Practice provides guidelines for automotive vehicle glass replacement shops and their personnel in the correct replacement practices, materials, and procedures for stationary safety glazing components. The design of today’s automotive vehicles and the development of new technology can directly influence occupant safety and vehicle structural integrity. The correct installation of stationary safety glazing components can contribute directly to occupant safety and structural integrity of the vehicle.
Standard
Plastic Motor Vehicle Safety Glazing—Tolerances and Fabrication Details
1997-04-01
HISTORICAL
J1691_199704
This SAE Recommended Practice is intended to cover plastic safety glazing for use in motor vehicles and motor vehicle equipment. Nominal specifications for thickness, flatness, curvature, size, and fabrication details are presented principally for the guidance of body engineers and designers. For additional information on plastic safety glazing materials for use in motor vehicles and motor vehicle equipment, please see SAE J674.
