Standard
Pressure Testing, Hydraulic Pressure as Specified
2023-05-17
CURRENT
AMS2615G
This specification provides requirements and procedures for hydraulic-pressure leak testing of parts.
Search Results
Standard
Controlled Pneumatic Needle Peening, Straightening and Forming
2021-04-22
CURRENT
AMS2545A
This specification covers the requirements for saturation peening, straightening, and forming metal parts using controlled pneumatic activated needles.
Standard
Application of Tungsten Carbide Coatings on Ultra High Strength Steels High Velocity Oxygen / Fuel Process
2020-12-10
CURRENT
AMS2448C
This specification covers engineering requirements for applying tungsten carbide thermal spray coatings to ultra-high strength steels (220 ksi and above) utilizing high velocity oxygen fuel (HVOF) combustion driven processes and the properties for such coatings. The processes and procedures herein apply only to the properties of the as-deposited coating.
Standard
Metallic Whiskers
2019-10-17
CURRENT
AIR4129A
This AIR presents an abbreviated review of the metallurgical phenomena known as whiskers. It is not all encompassing; rather, it is intended to introduce the design engineer to the technical issues of metallic whiskers, their formation, and the potentially dangerous problems they can cause.
Standard
Graphite Coating, Thin Lubricating Film Impingement Applied
2019-10-10
CURRENT
AMS2525E
This specification covers a coating consisting of finely-powdered graphite in a heat-resistant inorganic binder.
Standard
Superfinishing of HVOF Applied Tungsten Carbide Coatings
2019-07-15
CURRENT
AMS2452
This specification covers requirements for the superfinishing of High Velocity Oxygen/Fuel (HVOF) applied tungsten carbide thermal spray coatings.
Standard
Tungsten Disulfide Coating, Thin Lubricating Film, Binder-Less Impingement Applied
2019-01-14
CURRENT
AMS2530A
This specification covers a coating consisting of tungsten disulfide without binders and not requiring a curing process.
Standard
Peening Media Conditioned Carbon Steel Cut Wire Shot, High Hardness (55 to 62 HRC) (AWCH)
2019-01-04
CURRENT
AMS2431/8C
This specification, in conjunction with the general requirements for peening media covered in AMS2431, establishes the requirements for the procurement of conditioned carbon steel cut wire shot with a hardness of 55 to 62 HRC.
Standard
Peening Media Conditioned Stainless Steel Cut Wire Shot (AWS)
2019-01-04
CURRENT
AMS2431/4D
The complete requirements for procuring the product shall consist of this document and the latest issue of the basic specification, AMS2431.
Standard
Peening Media Conditioned Carbon Steel Cut Wire Shot, Regular Hardness (45 to 52 HRC) (AWCR)
2019-01-04
CURRENT
AMS2431/3E
The complete requirements for procuring the product shall consist of this document and the latest issue of the basic specification, AMS2431.
Standard
Pressure Testing, Hydraulic Pressure as Specified
2018-08-23
HISTORICAL
AMS2615F
This specification provides requirements and procedures for hydraulic-pressure leak testing of parts.
Standard
Grinding of HVOF Sprayed Tungsten Carbide Coatings Applied to High Strength Steels
2018-06-02
HISTORICAL
AMS2449A
This specification covers engineering requirements for the grinding of tungsten carbide High Velocity Oxygen/Fuel (HVOF) thermal spray coatings applied to high strength steels (220 ksi and above).
Standard
Controlled Pneumatic Needle Peening, Straightening and Forming
2017-11-29
HISTORICAL
AMS2545
This specification covers the requirements for saturation peening, straightening and forming metal parts using controlled pneumatic activated needles.
Standard
Molybdenum Disulfide, Technical, Lubrication Grade
2017-09-22
CURRENT
AMSM7866B
This specification covers the requirements for procurement of one grade of powdered molybendum disulfide to be used in lubricants and greases for surfaces where boundary conditions exist.
Standard
Coating, Tungsten Carbide-Cobalt Coating, Detonation Process
2017-09-20
CURRENT
AMS2435H
This specification covers the engineering requirements for applying tungsten carbide/cobalt coatings to metal parts by the detonation process and the properties of such coatings.
Standard
Impregnation of Porous Castings & Sintered Metal Components
2017-03-21
CURRENT
AMS03_1A
This SAE Standard specifies the processes and type of impregnant which can be used when impregnating castings for the following purposes: a For the recovery of ferrous and non-ferrous castings containing micro porosity, where pressure tightness is mandatory. b For sealing castings/sinter metal components to improve corrosion resistance and/or to render the surface suitable for subsequent surface treatment.
Standard
Oil, Odorless Heavy Solvent
2016-02-09
CURRENT
AMS3161C
This specification covers a petroleum base material in the form of a liquid.
Standard
Impregnation of Porous Castings & Sintered Metal Components
2015-02-24
HISTORICAL
AMS03_1
This SAE Standard specifies the processes and type of impregnant which can be used when impregnating castings for the following purposes: a For the recovery of ferrous and non-ferrous castings containing micro porosity, where pressure tightness is mandatory. b For sealing castings/sinter metal components to improve corrosion resistance and/or to render the surface suitable for subsequent surface treatment.
Standard
Graphite Coating, Thin Lubricating Film Impingement Applied
2013-07-10
HISTORICAL
AMS2525D
This specification covers a coating consisting of finely-powdered graphite in a heat-resistant inorganic binder.
Standard
Molybdenum Disulfide Coating, Thin Lubricating Film Impingement Applied
2013-01-12
CURRENT
AMS2526D
This specification covers requirements for a coating consisting of finely-powdered molybdenum disulfide in a heat-resistant inorganic binder applied to parts.
