Refine Your Search

Date

Date

Topic

Topic

Thermodynamics Aircraft structures Vehicles and equipment Electrical, Electronics, and Avionics Aircraft AMS D Nonferrous Alloys Committee

Search Results

Viewing 1 to 20 of 45
123Next >Last >>
Sort by published
Standard

Copper Bars, Rods, and Shapes Oxygen-Free, Hard Temper (H04)
2022-10-13
CURRENT
AMS4602E
This specification covers one type of copper in the form of bars, rods, and shapes. Requirements are provided for bar and rods up to 3.000 inches (mm) in nominal diameter, squares and rectangles with up to 4.000 inches (mm) least distance between parallel sides and shapes of any size (see 8.6).
Standard

Aluminum Alloy, Rolled or Cold Finished Bars, Rods, and Wire 4.0Cu - 0.70Mn - 0.60Mg - 0.50Si (2017; -T4, -T451) Solution Heat Treated
2022-07-06
CURRENT
AMS4118M
This specification covers an aluminum alloy in the form of bars, rods, and wire 8.000 inches (203.20 mm) and under in nominal diameter and for squares, hexagons, octagons, and rectangles 50 in2 (322 cm2) and under in cross-sectional area and 8.000 inches (203.20 mm) and under in least distance between parallel sides (see 8.7).
Standard

Identification Marking of Copper and Copper Base Alloy Mill Products
2014-03-17
CURRENT
AMSSTD185A
This standard establishes the physical item marking requirements for identification purposes for copper and copper-base alloy mill products procured and issued for government activities. Shipment and inspection acceptance markings are not within the scope of this standard.
Standard

Aluminum Alloy Alclad 7178, Plate and Sheet
2014-02-14
CURRENT
AMSQQA250/15C
This specification covers the specific requirements for 7178 aluminum alloy alclad plate and sheet; the general requirements are covered in AMS-QQ-A-250. The plate and sheet covered by this specification shall be an integral composite product consisting of a heat-treatable aluminum alloy (7178) core with thin layers of an aluminum alloy (7072) anodic to the core and of approximately equal thickness bonded to both surfaces.
Standard

Aluminum Alloy 7178, Plate and Sheet
2014-02-14
CURRENT
AMSQQA250/14B
This specification covers the specific requirements for 7178 aluminum alloy plate and sheet material; the general requirements are covered in AMS-QQ-A-250.
Standard

Aluminum Alloy, 7178-T76, Alclad Plate and Sheet Improved Exfoliation Resistant
2014-02-14
CURRENT
AMSQQA250/22C
This specification covers the specific requirements for improved exfoliation resistant alclad aluminum alloy 7178-T76 sheet and -T7651 plate. The general requirements are covered in AMS-QQ-A-250. The plate and sheet covered by this specification shall be an integral composite product consisting of a heat-treatable aluminum alloy (7178) core with thin layers of an aluminum alloy (7072) anodic to the core and of approximately equal thickness, bonded to both surfaces
Standard

Aluminum Alloy 7178, Plate and Sheet
2013-05-29
HISTORICAL
AMSQQA250/14A
This specification covers the specific requirements for 7178 aluminum alloy plate and sheet material; the general requirements are covered in AMS-QQ-A-250.
Standard

Aluminum Alloy Alclad 7178, Plate and Sheet
2012-09-28
HISTORICAL
AMSQQA250/15B
This specification covers the specific requirements for 7178 aluminum alloy alclad plate and sheet; the general requirements are covered in AMS-QQ-A-250. The plate and sheet covered by this specification shall be an integral composite product consisting of a heat-treatable aluminum alloy (7178) core with thin layers of an aluminum alloy (7072) anodic to the core and of approximately equal thickness bonded to both surfaces.
Standard

Aluminum Alloy, 7178-T76, Alclad Plate and Sheet, Improved Exfoliation Resistant
2012-04-04
HISTORICAL
AMSQQA250/22B
This specification covers the specific requirements for improved exfoliation resistant alclad aluminum alloy 7178-T76 sheet and -T7651 plate. The general requirements are covered in AMS-QQ-A-250. The plate and sheet covered by this specification shall be an integral composite product consisting of a heat-treatable aluminum alloy (7178) core with thin layers of an aluminum alloy (7072) anodic to the core and of approximately equal thickness, bonded to both surfaces.
Standard

TOLERANCES Aluminum Alloy Standard Structural Shapes
2011-08-10
HISTORICAL
AMS2204F
This specification covers established manufacturing tolerances applicable to aluminum alloy standard structural shapes ordered to inch/pound dimensions. Standard structural shapes are shapes in certain standard alloys, tempers, sizes, and sections such as angles, channels, Tees, Zees, I-Beams, and H-Beams commonly used for structural purposes. These tolerances apply to all conditions, unless otherwise noted. The term "excl" applies only to the higher figure of the specified range.
Standard

Identification Marking of Copper and Copper Base Alloy Mill Products
2008-05-02
HISTORICAL
AMSSTD185
This standard establishes the physical item marking requirements for identification purposes for copper and copper-base alloy mill products procured and issued for government activities. Shipment and inspection acceptance markings are not within the scope of this standard.
Standard

Tolerances, Metric Copper and Copper Alloy Bars and Rods
2003-03-12
HISTORICAL
MAM2221C
This specification covers established metric manufacturing tolerances applicable to bars and rods of copper and copper alloys ordered to metric dimensions. These tolerances apply to all conditions, unless otherwise noted. The term “exclusive” is used to apply only to the higher figure of a specified range.
Standard

Tolerances, Metric Copper and Copper Alloy Bars and Rods
1999-10-01
HISTORICAL
MAM2221B
This specification covers established metric manufacturing tolerances applicable to bars and rods of copper and copper alloys ordered to metric dimensions. These tolerances apply to all conditions, unless otherwise noted. The term "exclusive" is used to apply only to the higher figure of a specified range.
Standard

Aluminum Alloy, 7178-T76, Alclad Plate and Sheet, Improved Exfoliation Resistant
1998-09-01
HISTORICAL
AMSQQA250/22A
This specification covers the specific requirements for improved exfoliation resistant alclad aluminum alloy 7178-T76 sheet and -T7651 plate. The general requirements are covered in AMS-QQ-A-250. The plate and sheet covered by this specification shall be an integral composite product consisting of a heat-treatable aluminum alloy (7178) core with thin layers of an aluminum alloy (7072) anodic to the core and of approximately equal thickness, bonded to both surfaces.
123Next >Last >>
X