Search Results

Standard

Aluminum Alloy, Clad Two Sides Sheet 0.6Mg - 0.35Si - 0.28Cu (No. 22 Brazing Sheet) As Fabricated

2023-12-20

CURRENT

AMS4256D

This specification covers an aluminum alloy in the form of sheet 0.010 to 0.249 inch (0.25 to 6.32 mm), inclusive, in nominal thickness, clad on two sides (see 8.5).

Standard

Aluminum Alloy, Discontinuously Reinforced Hot Isostatically Pressed Shapes 6061B/SiC/40p (3 μm) (T1P)

2023-03-08

CURRENT

AMS4368A

This specification covers discontinuously reinforced aluminum alloy (DRA) metal matrix composites (MMC) made by mechanical alloying of 6061B aluminum powder and SiC particulate, which is then consolidated by Hot Isostatic Pressing (HIP) into shapes between 12 to 100 square inches (0.008 to 0.065 m2), inclusive, cross-section. Tensile property response to heat treatment has been demonstrated on samples of 1 square inch (645 mm2) maximum cross section (see 8.9).

Standard

Aluminum Alloy, Discontinuously Reinforced Sheet 2009/SiC/15w (T8P) Solution Heat Treated, Stretched, and Precipitation Heat Treated

2022-11-22

CURRENT

AMS4304C

This specification covers discontinuously reinforced aluminum alloy (DRA) metal matrix composites (MMC) in the form of sheet.

Standard

Aluminum Alloy Sheet and Plate, Alclad 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (Alclad 7075-O) Annealed or when specified, “As Fabricated” (Alclad 7075-F)

2022-08-05

CURRENT

AMS4048R

This specification covers an aluminum alloy in the form of sheet and plate 0.008 to 1.000 inch (0.20 to 25.40 mm), inclusive, in thickness, clad on two sides, supplied in the annealed (O) condition. When specified, product shall be supplied in the “as fabricated” (F) temper (see 8.6).

Standard

Copper-Beryllium Alloy (Copper Alloy Numbers C17500 and C17510), Strip

2022-06-09

CURRENT

AS81021B

This specification covers the requirements for the acquisition of two alloys of copper-beryllium alloy strip, having higher electrical conductivity than copper-beryllium alloy strip normally used (see 6.1). All sizes of strip are covered by this specification.

Standard

Aluminum Alloy, Alclad Sheet and Plate, 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr, (7075; -T76 Sheet, -T7651 Plate), Solution and Precipitation Heat Treated

2022-04-26

WIP

AMS4316C

This specification covers an aluminum alloy in the form of Alclad sheet and plate 0.040 to 1.000 inch, incl (1.02 to 25.40 mm, incl) in nominal thickness (see 8.4).

Standard

Aluminum Alloy Castings, High Strength 4.5Cu - 0.70Ag - 0.30Mn - 0.25Mg - 0.25Ti (A201.0-T7) Solution Heat Treated and Overaged

2021-07-20

WIP

AMS4229H

This specification covers an aluminum alloy in the form of sand, permanent mold, and composite mold castings.

Standard

Aluminum Alloy, Discontinuously Reinforced Hot Isostatically Pressed Shapes 2124A/SiC/25p (3µm) (T1P)

2021-07-20

WIP

AMS4355A

This specification covers discontinuously reinforced aluminum alloy (DRA) metal matrix composites (MMC) made by mechanical alloying of the 2124A powder and SiC particulate, which is then consolidated by Hot Isostatic Pressing (HIP) into shapes less than 62 in2 (0.04 m2) cross-section (see 8.11).

Standard

Aluminum Alloy, Clad Two Sides Sheet 0.6Mg - 0.35Si - 0.28Cu (No. 24 Brazing Sheet) As Fabricated

2021-07-07

CURRENT

AMS4460B

This specification covers an aluminum alloy in the form of sheet, clad on two sides.

Standard

Aluminum Alloy Castings 7.0Si - 0.35Mg (A356.0-T6) (Formerly T6P Temper) Solution and Precipitation Heat Treated

2021-03-23

WIP

AMS4218K

This specification covers an aluminum alloy in the form of sand, permanent mold, composite mold, and investment castings.

Standard

Aluminum Alloy Castings 4.6Cu - 0.35Mn - 0.25Mg - 0.22Ti (A206.0-T4) Solution Heat Treated and Naturally Aged

2020-09-15

WIP

AMS4236E

This specification covers an aluminum alloy in the form of sand, investment, permanent mold, and composite mold castings.

Standard

Aluminum Alloy Castings 4.6Cu - 0.35Mn - 0.25Mg - 0.22Ti (A206.0-T7) Solution and Precipitation Heat Treated

2020-09-15

WIP

AMS4235D

This specification covers an aluminum alloy in the form of sand, permanent mold, and composite mold castings.

Standard

Aluminum Alloy, Alclad Sheet 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (Alclad 7050-T76) Solution Heat Treated and Overaged

2020-01-13

CURRENT

AMS4243C

This specification covers an aluminum alloy in the form of alclad sheet 0.040 to 0.187 inch (1.02 to 4.75 mm) inclusive in nominal thickness (see 8.6).

Standard

Aluminum Alloy, Alclad Sheet and Plate 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075; -T76 Sheet, -T7651 Plate) Solution and Precipitation Heat Treated

2019-09-10

CURRENT

AMS4316B

This specification covers an aluminum alloy in the form of Alclad sheet and plate 0.040 to 1.000 inch, incl (1.02 to 25.40 mm, incl) in nominal thickness (see 8.4).

Standard

Aluminum Alloy, Discontinuously Reinforced Extruded Bar, Rod, Wire and Shapes (2124A/SiC/25p (3 µm) (T1P)

2018-07-25

CURRENT

AMS4379

This specification covers a discontinuously reinforced aluminum alloy (DRA) made by mechanical alloying 2124A aluminum powder and SiC particulate. It is produced in the form of extruded bar, rod, wire and shapes with cross section inclusive of 1 inch (25.4 mm) diameter or less.

Standard

Aluminum Alloy, Discontinuously Reinforced Extruded Bar, Rod, Wire and Shapes (2124A/SiC/25p (0.7 µm) (T1P)

2018-07-25

CURRENT

AMS4369

This specification covers a discontinuously reinforced aluminum alloy (DRA) made by mechanical alloying 2124A aluminum powder and SiC particulate. It is produced in the form of extruded bar, rod, wire and shapes with cross section inclusive of 1 inch (25.4 mm) diameter or less.

Standard

Bearings, Leaded Bronze 80Cu – 10Pb – 10Sn Steel Back

2018-04-19

CURRENT

AMS4827F

This specification covers bearings of a leaded bronze cast on one or both faces of a steel backing.

Standard

Bearings, Leaded Copper 70Cu – 28.5Pb Steel Back

2018-04-19

CURRENT

AMS4820F

This specification covers bearings of leaded copper cast on one or both faces of a steel backing.

Standard

Bearings, Babbitt 91Sn – 4.5Sb – 4.5Cu

2018-04-19

CURRENT

AMS4800F

This specification covers bearings of a tin alloy cast on one or both faces of a steel or bronze backing.

Standard

Aluminum Alloy, Sheet and Plate, Alclad 4.4Cu - 1.5Mg - 0.60Mn (Alclad 2024-O, Sheet and Plate) Annealed; or when specified, “As Fabricated” (2024-F)

2018-04-10

CURRENT

AMS4461B

This specification covers an aluminum alloy in the form of sheet and plate 0.008 to 1.750 inch (0.203 to 44.450 mm) thick, supplied in the annealed (O) condition (see 8.4). When specified, product shall be supplied in the “as fabricated” (F) temper.