Refine Your Search

Date

Date

Manufacturing Gases Truck and Bus Wheel Committee Catalysts

Search Results

Viewing 1 to 20 of 23
12Next >Last >>
Sort by published
Standard

Nomenclature - Wheels, Hubs, and Rims for Commercial Vehicles
2022-06-20
CURRENT
J393_202206
This SAE Recommended Practice establishes uniform engineering nomenclature for wheels, hubs, rims, and their components used in truck, bus, and trailer applications. This nomenclature and accompanying drawings are intended to define functional truck wheel, hub, and rim designs. For nomenclature specific to “passenger-type” disc wheels, refer to SAE J1982. The International Standard (ISO) nomenclature is shown in parentheses when different than SAE J393.
Standard

Fatigue Test Procedures: Hubs and Wheels for Demountable Rims
2021-05-06
CURRENT
J1095_202105
This SAE Recommended Practice provides uniform laboratory procedures for fatigue testing of wheels for demountable rims and hubs intended for normal highway use on trucks, buses, truck trailers, and multipurpose passenger vehicles. The hubs included have bolt circle diameters ranging from 165.1 to 335.0 mm (6.500 to 13.189 inches). It is up to each hub and/or wheel for demountable rims manufacturer to determine the appropriate test method, accelerated load factor and cycle life requirements applicable to obtain satisfactory service life for a given application. When deviations from the procedures recommended herein are made, it is the responsibility of the hub and/or wheel for demountable rims developer to modify other parameters as necessary to ensure satisfactory service life for the intended application. It should be noted that this test procedure focuses on fatigue resulting from vehicle loading and cornering forces.
Standard

Wheels/Rims - Military Vehicles Test Procedures and Performance Requirements
2019-06-06
HISTORICAL
J1992_201906
This SAE Recommended Practice provides minimum performance requirements and uniform laboratory procedures for fatigue testing of disc wheels, demountable rims, and bolt-together divided wheels intended for normal highway use on military trucks, buses, truck-trailers, and multipurpose vehicles. For other (non-military) wheels and rims intended for normal highway use on trucks and buses, refer to SAE J267. For wheels intended for normal highway and temporary use on passenger cars, light trucks, and multipurpose vehicles, refer to SAE J328. For wheels used on trailers drawn by passenger cars, light trucks, or multipurpose vehicles, refer to SAE J1204. This document does not cover off-highway or other special application wheels and rims.
Standard

Nomenclature - Wheels, Hubs, and Rims for Commercial Vehicles
2017-10-23
HISTORICAL
J393_201710
This SAE Recommended Practice establishes uniform engineering nomenclature for wheels, hubs, rims, and their components used in truck, bus, and trailer applications. This nomenclature and accompanying drawings are intended to define functional truck wheel, hub, and rim designs. For nomenclature specific to “passenger-type” disc wheels, refer to SAE J1982. The International Standard (ISO) nomenclature is shown in parentheses when different than SAE J393.
Standard

Identification of Truck, Trailer, and Bus Wheel Seals and Associated Packaging
2015-11-19
CURRENT
J2224_201511
This SAE Information Report lists the symbols used by suppliers of truck, trailer, and bus wheel seals to identify their products. These symbols appear on seals and packaging. 1.1 Purpose The purpose of this document is to provide users of truck, trailer, and bus wheel seals a means of identifying the suppliers of all such components by use of the symbology utilized by the suppliers on their components and packaging.
Standard

Wheel End Assembly and Axle Spindle Interface Dimensions - Truck and Bus
2014-07-30
HISTORICAL
J2475_201407
This recommended practice contains dimensions and tolerances for spindles in the interface area. Interfacing components include axle spindle, bearing cones, bearing spacer, seal and wheel hub. This recommended practice is intended for axles commonly used on Class 7 and 8 commercial vehicles. Included are SAE axle configurations FF, FL, I80, L, N, P, R, U, and W.
Standard

Wheel End Assembly and Axle Spindle Interface Dimensions—Truck and Bus
2008-08-22
HISTORICAL
J2475_200808
This recommended practice contains dimensions and tolerances for spindles in the interface area. Interfacing components include axle spindle, bearing cones, bearing spacer, seal and wheel hub. This recommended practice is intended for axles commonly used on Class 7 and 8 commercial vehicles. Included are SAE axle configurations FF, FL, I80, L, U, W, R, N and P.
Standard

Spoke Wheels and Hub Fatigue Test Procedures
2003-03-07
HISTORICAL
J1095_200303
This SAE Recommended Practice provides uniform laboratory procedures for fatigue testing of spoke wheels and hubs intended for normal highway use on trucks, buses, truck trailers, and multipurpose passenger vehicles. The hubs included have bolt circle diameters from 165.1 to 335.0 mm (6.50 to 13.19 in). It is up to each hub and/or spoke wheel developer to determine what test method, accelerated load factor and cycle life requirements are applicable to obtain satisfactory service life in a given application. When deviations from the procedures recommended herein are made, it is the responsibility of the hub and/or spoke wheel developer to modify other parameters to obtain satisfactory service life.
Standard

SPOKE WHEELS AND HUB FATIGUE TEST PROCEDURES
1995-03-01
HISTORICAL
J1095_199503
This SAE Recommended Practice provides uniform laboratory procedures for fatigue testing of spoke wheels and hubs intended for normal highway use on trucks, buses, truck trailers, and multipurpose passenger vehicles. The hubs included have bolt circle diameters from 165.1 to 335.0 mm (6.50 to 13.19 in). The tests described in this document are not to be construed as the only tests required or permitted to ensure that a spoke wheel or a hub will perform satisfactorily for its intended use.
Standard

SPOKE WHEELS AND HUB FATIGUE TEST PROCEDURES
1991-01-01
HISTORICAL
J1095_199101
This SAE Recommended Practice provides uniform laboratory procedures for fatigue testing of spoke wheels and hubs intended for normal highway use on trucks, buses, truck trailers, and multipurpose passenger vehicles. The hubs included have bolt circle diameters from 165.1 to 335.0 mm (6.50 to 13.19 in). The tests described in this document are not to be construed as the only tests required or permitted to assure that a spoke wheel or a hub will perform satisfactorily for its intended use.
Standard

HUB FATIGUE TEST PROCEDURES
1986-03-01
HISTORICAL
J1095_198603
This Recommended Practice provides uniform laboratory procedures for fatigue testing of hubs intended for highway use on trucks, buses, truck-trailers, and multi-purpose passenger vehicles having bolt circles from 6.5 - 13-3/16 in (165.1-335 mm) diameters. The tests described in this Recommended Practice are not to be construed as the only tests required or permitted to assure that a hub will perform satisfactorily for its intended use.
Standard

HUB FATIGUE TEST PROCEDURES
1982-06-01
HISTORICAL
J1095_198206
This recommended practice provides uniform laboratory procedures for fatigue testing of hubs intended for highway use on trucks, buses, truck-trailers, and multi-purpose passenger vehicles having bolt circles from 6.5 − 13 3 16 in (165.1–335 mm) diameters. The tests described in this recommended practice are not to be construed as the only tests required or permitted to assure that a hub will perform satisfactorily for its intended use.
12Next >Last >>
X