Refine Your Search

Date

Date

Maintenance and Aftermarket Technical review Optimization Corrosion Ground support Metallic Tubing Committee Parts

Search Results

Viewing 1 to 20 of 25
12Next >Last >>
Sort by published
Standard

Welded Low-Carbon Steel Tubing Suitable for Bending, Flaring, Beading, Forming, and Brazing
2022-09-08
CURRENT
J526_202209
The SAE J526 Standard covers electric-resistance welded single-wall low-carbon steel pressure tubing intended for general automotive, refrigeration, hydraulic, and other similar applications requiring tubing of a quality suitable for bending, flaring, beading, forming, and brazing. Material produced to this specification is not intended to be used for single flare applications due to the potential leak path that would be caused by the ID weld bead or scarfed region. Assumption of risks when using this material for single flare applications shall be defined by agreement between the producer and tube purchaser. The material produced to this specification is intended to service pressure applications where severe forming and bending is not required.
Standard

Nominal Reference Working Pressures for Steel Hydraulic Tubing
2022-07-26
CURRENT
J1065_202207
This SAE Information Report is intended to provide design guidance in the selection of steel tubing and related tube fittings for general hydraulic system applications. The information presented herein is based on tubing products which conform to SAE and ISO standards listed in the reference section. All pressure rating data found in the charts included in this document are calculated per the formula found in ISO 10763 and the main body of this document.
Standard

Welded Flash Controlled, SAE 1021 Carbon Steel Tubing, Normalized for Bending, Double Flaring, Cold Forming, Welding, and Brazing
2020-06-05
CURRENT
J2435_202006
This SAE Standard covers normalized electric resistance welded flash controlled single-wall, SAE 1021 carbon steel pressure tubing intended for use as pressure lines and in other applications requiring tubing of a quality suitable for bending, double flaring, cold forming, welding, and brazing. Material produced to this specification is not intended to be used for single flare applications due to the potential leak path caused by the inside diameter (ID) weld bead or scarfed region. Assumption of risks when using this material for single flare applications shall be defined by agreement between the producer and purchaser. The grade of material produced to this specification is higher in carbon and manganese content than the grade of material specified in SAE J356 and is intended to service higher pressure applications than equivalent sizes of SAE J356.
Standard

Seamless, 304/304L Stainless Steel Tubing
2019-10-14
CURRENT
J3129_201910
This SAE Standard covers seamless stainless steel pressure tubing intended for use as hydraulic lines and in other applications requiring corrosion resistance.
Standard

Welded, 304/304L Stainless Steel Tubing
2019-10-14
CURRENT
J3127_201910
This SAE Standard covers welded stainless steel pressure tubing intended for use as hydraulic lines and in other applications requiring corrosion resistance.
Standard

Brazed Double Wall Low-Carbon Steel Tubing
2017-10-25
CURRENT
J527_201710
This SAE Standard covers brazed double wall low-carbon steel tubing intended for general automotive, refrigeration, hydraulic, and other similar applications requiring tubing of a suitable quality for bending, flaring, beading, forming, and brazing.
Standard

Fuel Injection Tubing
2013-12-17
CURRENT
J529_201312
This standard covers tubing intended for use as high pressure fuel injection lines on a range of engines requiring tubing no larger than ¼ in (6.35 mm) OD. The material and construction of the tubing shall be cold drawn annealed low carbon seamless steel of a quality suitable for cold swaging, cold upsetting, and cold bending.
Standard

Brazed Double Wall Low-Carbon Steel Tubing
2013-06-12
HISTORICAL
J527_201306
This SAE Standard covers brazed double wall low-carbon steel tubing intended for general automotive, refrigeration, hydraulic, and other similar applications requiring tubing of a suitable quality for bending, flaring, beading, forming, and brazing.
Standard

Seamless Copper-Nickel 90-10 Tubing
2011-12-06
CURRENT
J1650_201112
This SAE Standard covers seamless copper-nickel tubing for use in hydraulic brake pressure conductors, general automotive applications, and other similar uses.
Standard

Nominal Reference Working Pressures for Steel Hydraulic Tubing
2003-02-05
HISTORICAL
J1065_200302
This SAE Information Report is intended to provide design guidance in the selection of steel tubing and related tube fittings for general hydraulic system applications. The information presented herein is based on tubing products which conform to SAE standards listed in the reference section.
Standard

Recommended Practices for Fluid Conductor Metallic Tubing Applications
2001-12-13
HISTORICAL
J2551_200112
These recommended practices provide general recommendations for designing and fabricating metallic tubes and tube assemblies for fluid power applications utilizing commonly available manufacturing methods and general guidelines for tube selection and application. These documents are primarily intended for mobile/stationary industrial equipment and automotive applications. Aircraft and Aerospace applications were not considered during the preparation of this document.
Standard

Brazed Double Wall Low-Carbon Steel Tubing
2000-11-28
HISTORICAL
J527_200011
This SAE Standard covers brazed double wall low-carbon steel tubing intended for general automotive, refrigeration, hydraulic, and other similar applications requiring tubing of a suitable quality for bending, flaring, beading, forming, and brazing.
Standard

PRESSURE RATINGS FOR HYDRAULIC TUBING AND FITTINGS
1992-03-01
HISTORICAL
J1065_199203
This SAE Information Report is intended to provide design guidance in the selection of steel tubing and related tube fittings for general hydraulic system applications. The information presented herein is based on tubing products which conform to SAE J524, SAE J525, and SAE J356, and is subject to due consideration being given to the following limitations:
Standard

FUEL INJECTION TUBING
1985-03-01
HISTORICAL
J529_198503
This standard covers tubing intended for use as high pressure fuel injection lines on a range of engines requiring tubing no larger than ¼ in (6.35 mm) OD. The material and construction of the tubing shall be cold drawn annealed low carbon seamless steel of a quality suitable for cold swaging, cold upsetting, and cold bending.
Standard

BRAZED DOUBLE WALL LOW CARBON STEEL TUBING
1983-01-01
HISTORICAL
J527_198301
This standard covers brazed double wall low carbon steel tubing intended for general automotive applications and other similar uses.
Standard

WELDED LOW CARBON STEEL TUBING
1980-01-01
HISTORICAL
J526_198001
This standard covers welded single wall low carbon steel tubing intended for general automotive applications and other similar uses.
12Next >Last >>
X