This SAE Aerospace Standard (AS) aims at identifying the design criteria and testing methods adequate to guarantee the ultimate load and operational dependability of cargo restraint strap assemblies with a typical 22250 N (5000 lbf) rated ultimate tension load capability, as used by the airline industry in order to restrain cargo on board civil transport aircraft during flight: a cargo loaded and tied down onto airworthiness certified air cargo pallets, themselves restrained into aircraft lower deck or main/upper deck cargo systems and meeting the requirements of NAS 3610 or AS36100, or b non-unitized individual pieces of cargo, or pieces of, cargo placed onto an unrestrained (“floating”) pallet into either lower deck or main deck containerized cargo compartments of an aircraft.
This SAE Aerospace Recommended Practice (ARP) recommends design and test criteria for reusable shipping and storage containers for aircraft engines and modules, weapon systems and components, etc. The containers are to provide water-vaporproof and physical protection.
This recommended practice covers a rail concept stand that may be used for horizontal disassembly and reassembly, and maintenance, incorporating certain design features which are defined herein. These features include the rail dimensions and width, length and height of stand to insure compatibility with rail concept type transport and positioning trailers.
This Standard aims at identifying the design criteria and testing methods adequate to guarantee the ultimate load and operational dependability of cargo restraint strap assemblies with a typical 22,250 N (5,000 lbf) rated ultimate tension load capability, as used by the airline industry in order to restrain on board civil transport aircraft during flight: a cargo loaded and tied down onto airworthiness certified air cargo pallets, themselves restrained into aircraft lower deck or main/upper deck cargo systems and meeting the requirements of NAS 3610 or AS36100, or b non-unitized individual pieces of cargo, or pieces of, cargo placed onto an unrestrained (“floating”) pallet into either lower deck or main deck containerized cargo compartments of an aircraft.
This document establishes dimensional, structural, and environmental requirements for two types of interline pallet nets. Type II covers NAS 3610 code sizes and Type III covers other sizes not currently included in NAS 3610.
This SAE Aerospace Recommended Practice (ARP) establishes the basic recommendations for the following two types of configuration for securing cargo to aircraft passenger seats on transport category aircraft: It is emphasized that the two types of restraint shown are merely examples of methods currently used and does not imply that alternative methods are not acceptable. For the purposes of this document, the minimum essential criteria are identified by the use of the key word "shall," Recommended criteria are identified by the use of the key word "should," and while not mandatory are considered to be of significant importance in providing safe, economical, and practical means of cargo restraint. Deviation from recommended criteria should occur only after careful consideration, extensive testing, and thorough service evaluation have shown alternative methods to be satisfactory.
This SAE Aerospace Recommended Practice (ARP) establishes the basic recommendations for the following two types of configuration for securing cargo to aircraft passenger seats on transport category aircraft: It is emphasized that the two types of restraint shown are merely examples of methods currently used and does not imply that alternative methods are not acceptable. For the purposes of this document, the minimum essential criteria are identified by the use of the key word "shall." Recommended criteria are identified by the use of the key word "should," and while not mandatory are considered to be of significant importance in providing safe, economical, and practical means of cargo restraint. Deviation from recommended criteria should occur only after careful consideration, extensive testing, and thorough service evaluation have shown alternative methods to be satisfactory.
This Standard aims at identifying the design criteria and testing methods adequate to guarantee the ultimate load and operational dependability of cargo restraint strap assemblies with a typical 22 250 N (5,000 lbf) rated ultimate tension load capability, as used by the airline industry in order to restrain on board civil transport aircraft during flight: a cargo loaded and tied down onto airworthiness certified air cargo pallets, themselves restrained into aircraft lower deck or main deck cargo systems meeting the requirements of NAS 3610, or b non-unitized individual pieces of cargo, or pieces of cargo placed onto an unrestrained (“floating”) pallet into either lower deck or main deck containerized cargo compartments of an aircraft.
This Standard aims at identifying the design criteria and testing methods adequate to guarantee the ultimate load and operational dependability of cargo restraint strap assemblies with a typical 22 250 N (5,000 lbf) rated ultimate tension load capability, as used by the airline industry in order to restrain on board civil transport aircraft during flight: a cargo loaded and tied down onto airworthiness certified air cargo pallets, themselves restrained into aircraft lower deck or main deck cargo systems meeting the requirements of NAS 3610, or b non-unitized individual pieces of cargo, or pieces of cargo placed onto an unrestrained (“floating”) pallet into either lower deck or main deck containerized cargo compartments of an aircraft.
This specification covers one type of 5,000-pound capacity aircraft cargo tie down. The tie down is designated CGU-1/B and is furnished in a minimum length of 240 inches.
This Standard aims at identifying the design criteria and testing methods adequate to guarantee the ultimate load and operational dependability of cargo restraint strap assemblies with a typical 22 250 N (5,000 lbf) rated ultimate tension load capability, as used by the airline industry in order to restrain on board civil transport aircraft during flight: a cargo loaded and tied down onto airworthiness certified air cargo pallets, themselves restrained into aircraft lower deck or main deck cargo systems meeting the requirements of NAS 3610, or b non-unitized individual pieces of cargo, or pieces of cargo placed onto an unrestrained (“floating”) pallet into either lower deck or main deck containerized cargo compartments of an aircraft.
This specification establishes dimensional, structural and environmental requirements for two types of interline pallet nets. Type II covers NAS 3610 code sizes and Type III covers other sizes not currently included in NAS 3610.