Search Results

Standard

Sealing and Coating Compound, Polyurethane (PUR) Fuel Resistant, High Tensile Strength/Elongation for Integral Fuel Tanks/Fuel Cavities/General Purpose

2022-11-22

CURRENT

AMS3278C

This specification covers polyurethane (PUR) in the form of two-component sealing compounds.

Standard

Sealing Compound, Polythioether Elastomeric Two-Part Electrically Conductive

2022-11-02

CURRENT

AMS3266B

This specification covers two types of electrically conductive, elastomeric polythioether sealing compounds that cure at room temperature. The sealing compound is supplied as either a two-component system or as premixed and frozen.

Standard

Putty, General Purpose, Non-Hardening, Corrosion-Inhibiting

2022-09-08

CURRENT

AMS1321

This specification covers a general purpose, non-curing, corrosion-inhibiting putty compounds with non-hexavalent chromium corrosion inhibitors.

Standard

Sealing of Integral Fuel Tanks

2022-07-26

CURRENT

AIR4069D

This SAE Aerospace Information Report (AIR) presents preferred design, assembly, and repair practices for sealing of aircraft integral fuel tanks, including rework of applied fuel tank seals. It addresses engineering designs for integral fuel tanks as they are currently found in practice and discusses the most practical and conservative methods for producing a reliable, sealed system. Although this AIR presents practices for sealing of integral fuel tanks, the practices presented within this report are practices that are carried throughout sealing that include both pressure and environmental aircraft sealing. Design preferences for optimum sealing are not within the scope of this document. Such discussions can be found in the United States Air Force (USAF) sponsored report AFWAL-TR-87-3078, “Aircraft Integral Fuel Tank Design Handbook.”

Standard

Sealing Compound, Polysulfide (T) Synthetic Rubber for Integral Fuel Tank and Fuel Cell Cavities Low Density for Intermittent Use to 360 °F (182 °C)

2022-06-13

CURRENT

AMS3281G

This specification covers three types and three classes of fuel-resistant polysulfide sealing compound with low specific gravity, supplied as a two-component system which cures at room temperature.

Standard

Sealing Compound, Polythioether Rubber Fast Curing, Light Weight (Specific Gravity 0.78, Max) for Integral Fuel Tanks and General Purpose, Intermittent Use to 360 °F (182 °C)

2022-01-17

CURRENT

AMS3102A

This specification covers a fuel-resistant polythioether sealing compound with low specific gravity, supplied as a two-component system which cures at room temperature.

Standard

Release Agent, for Use During Form-in-Place Gasket Preparation

2021-12-15

CURRENT

AMS3092B

This specification establishes requirements for solvent-based and water-based release agents, in bulk or aerosol form.

Standard

Sealing Compound, Polysulfide Type, Low Temperature Curing, Quick Repair, Integral Fuel Tanks and Fuel Cell Cavities

2021-11-23

CURRENT

AMSS83318D

This specification covers two-component polysulfide sealing compounds for quick repair of integral fuel tanks and fuel cell cavities. The sealing compound shall be capable of being cured as low as 20 °F (-7 °C), and be resistant to long term exposures from -65 to 250 °F (-54 to 121 °C).

Standard

Solvents, Wipe for Cleaning Prior to Application of Primer and Top Coat Materials, Or Sealing Compounds

2021-09-29

WIP

AMS3167C

This specification covers liquid solvent cleaners.

Standard

Sealing Compound, Topcoat, Fuel Tank, Buna-N Type

2021-06-29

CURRENT

ARD50102

This specification covers one type of one-component, air-drying protective coating which cures at room temperature.

Standard

Sealing Compound, Topcoat, Fuel Tank, Buna-N Type

2021-06-29

CURRENT

AMSS4383C

This specification covers one type of one-component, air-drying protective coating which cures at room temperature.

Standard

Sealing Compound, Non-Curing, Fluorosilicone Groove Injection Temperature and Fuel Resistant

2021-06-01

CURRENT

AMS3376D

This specification covers a permanently mastic, non-curing fluorosilicone sealing compound in the form of a paste.

Standard

Sealing Compound, Polysulfide (T) Rubber, Fuel Resistant, Non-Chromated Corrosion Inhibiting for Intermittent Use to 360 °F (182 °C)

2020-09-09

CURRENT

AMS3265F

This specification covers polysulfide rubber sealing compounds containing only non-chromated corrosion inhibitors, supplied as a two-component system which cures at room temperature.

Standard

Test Method for Aerospace Firewall Sealant Flame Penetration

2020-07-07

HISTORICAL

AS5127/2C

This SAE Aerospace Standard (AS) describes the test methods to determine the flammability performance and capability to control the passage of, and effects from, fire on aircraft firewall sealing compounds. The methods are based requirements of FAR Part 25 Sections 25.865, 25.867, 25.1191, and 25.1193 and may be used to demonstrate compliance with the requirements established by FAA AC 20-135. This standard shall be used in conjunction with applicable material specifications.

Standard

Aerospace Standard Test Methods for Aerospace Sealants Two-Component Synthetic Rubber Compounds

2020-03-18

CURRENT

AS5127/1D

This SAE Aerospace Standard (AS) describes test methods to determine the application and performance properties of two-component sealing compounds. It shall be used in conjunction with AS5127 and the applicable material specification. When modifications to these test methods are called out in material specifications, the material specification shall take precedence.

Standard

Fluid, Jet Reference

2020-03-12

CURRENT

AMS2629F

This specification covers a mixture of liquid hydrocarbons and soluble additives.

Standard

Isolation and Corrosion Protection of Dissimilar Materials, Carbon Composite Structure Repair

2019-07-09

CURRENT

ARP4118B

This SAE Aerospace Recommended Practice (ARP) provides methods and guidelines for isolating dissimilar repair patch materials from carbon fiber reinforced plastic (herein also referred to as carbon composite) structure during a repair operation.

Standard

Sealing Compound, Fuel Resistant, Integral Fuel Tanks and Fuel Cell Cavities

2019-02-04

HISTORICAL

AMSS8802E

This specification covers fuel-resistant, two-component polysulfide synthetic rubber compounds which cure at room temperature.

Standard

Aerospace Standard Test Methods for Aerospace Sealants Methods for Preparing Aerospace Sealant Test Specimens

2018-11-14

CURRENT

AS5127C

This standard describes the accepted methods used for preparing aerospace sealant test specimens for qualification and quality conformance or acceptance testing. AS5127/1 and AS5127/2 are to be used in conjunction with this document and the applicable AMS specifications.

Standard

Sealing Compound, Polythioether Elastomeric Two-Part Electrically Conductive

2017-02-23

HISTORICAL

AMS3266A

This specification covers two types of electrically conductive, elastomeric polythioether sealing compounds that cure at room temperature. The sealing compound is supplied as either a two-component system or as premixed and frozen.