Search Results

Standard

Dendrite Arm Spacing of Structural Aircraft Quality D357 Aluminum Alloy Castings, Determination and Acceptance of

2024-05-09

ARP1947D

This document covers the recommended practice for determining the acceptability of the dendrite arm spacing (DAS) of D357-T6 aluminum alloy castings required to have tensile strength not lower than 50 ksi (345 MPa).

Standard

Aluminum Alloy, Sheet and Plate, 2.5Mg - 0.25Cr (5052-H32), Strain Hardened, Quarter-Hard, and Stabilized

2024-04-25

AMS4016N

This specification covers an aluminum alloy in the form of sheet and plate 0.017 to 2.000 inches (0.43 to 50.80 mm), inclusive, in nominal thickness (see 8.6).

Standard

Aluminum Alloy, Drawn Seamless Tubing 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-O) Annealed

2023-08-01

AMS4080R

This specification covers an aluminum alloy in the form of drawn seamless tubing in the annealed (O) condition. This specification covers products from 0.018 to 0.500 inch (0.46 to 12.70 mm) in wall thickness (see 8.6).

Standard

Aluminum Alloy, Welding Wire 5.0Si - 1.2Cu - 0.50Mg (C355.0)

2023-05-10

AMS4245G

This specification covers an aluminum alloy in the form of welding wire.

Standard

Brass, Seamless, Tubing 85Cu - 15Zn Annealed (O61)

2022-11-02

AMS4553E

This specification covers a copper alloy (brass) in the form of seamless tubing with nominal OD of 0.405 inch (10.29 mm) to 10.75 inches (273.05 mm) and nominal weight of 0.253 lb/ft (0.38 kg/m) to 66.142 lb/ft (98.43 kg/m) (see 8.6).

Standard

Aluminum Alloy, Extrusions 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti (2219-T3511) Solution Heat Treated, Stress-Relieved by Stretching, and Straightened

2022-10-04

AMS4163G

This specification covers an aluminum alloy in the form of extruded bars, rods, wire, profiles, and tubing up to 2.999 inches (76.17 mm), inclusive, in thickness, nominal diameter or wall thickness with cross-sectional area 25 square inches (161 cm2) and under (see 8.6).

Standard

Aluminum Alloy Forgings 7.7Zn - 2.5Mg - 1.5Cu - 0.16Cr (7149-T73) Solution and Precipitation Heat Treated

2022-09-14

AMS4320C

This specification covers an aluminum alloy in the form of die forgings, hand forgings, and forging stock.

Standard

Castings, Sand, Magnesium Alloy 1.5Ag - 2.1Di - 0.08Cu - 0.70Zr (EQ21A - T6) Solution and Precipitation Heat Treated

2022-09-13

WIP

AMS4417D

This specification covers a magnesium alloy in the form of sand castings.

Standard

Aluminum Alloy, Heat-Resistant, Castings 5.0Cu - 1.5Ni - 0.25Mn - 0.25Sb - 0.25Co - 0.20Ti - 0.20Zr (203.0-T6) Solution Heat Treated and Precipitation Heat Treated

2022-09-13

WIP

AMS4225F

This specification covers an aluminum alloy in the form of castings.

Standard

Magnesium Alloy Castings, Sand 9.0Al - 2.0Zn (AZ92A-T6) Solution and Precipitation Heat Treated

2022-09-13

WIP

AMS4434P

This specification covers a magnesium alloy in the form of sand castings.

Standard

Aluminum Alloy, Castings 7.0Si - 0.32Mg (356.0-T6) Solution and Precipitation Heat Treated

2022-09-13

WIP

AMS4217K

This specification covers an aluminum alloy in the form of castings.

Standard

Brass, Seamless Tubing 66.5Cu - 31.5Zn - 1.6Pb Drawn Temper (H58)

2022-09-08

AMS4558J

This specification covers a copper alloy (brass) in the form of seamless tubing.

Standard

Aluminum Alloy, Welding Wire 4.6Cu - 0.35Mn - 0.25Mg - 0.22Ti for Welding A206.0 Type Alloys

2022-08-09

AMS4244D

This specification covers an aluminum alloy in the form of two types of welding wire.

Standard

Aluminum, Foil and Light Gage Sheet 99.45Al (1145-0) Annealed

2022-08-05

AMS4011E

This specification covers aluminum in the form of foil and light gage sheet.

Standard

Aluminum Alloy, Sheet and Plate, Alclad 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (Alclad 7075; -T6 Sheet - T651 Plate) Solution and Precipitation Heat Treated

2022-08-05

AMS4049N

This specification covers an aluminum alloy in the form of sheet and plate with thickness from 0.008 to 4.000 inches (0.20 to 101.6 mm), inclusive, clad on two sides (see 8.6).

Standard

Aluminum Alloy Sheet and Plate, Alclad 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (Alclad 7075-O) Annealed or when specified, “As Fabricated” (Alclad 7075-F)

2022-08-05

AMS4048R

This specification covers an aluminum alloy in the form of sheet and plate 0.008 to 1.000 inch (0.20 to 25.40 mm), inclusive, in thickness, clad on two sides, supplied in the annealed (O) condition. When specified, product shall be supplied in the “as fabricated” (F) temper (see 8.6).

Standard

Zinc Alloy Castings, Die 4.0Al - 0.04Mg (AG40A) As Cast

2022-07-19

AMS4803F

This specification covers a zinc alloy in the form of die castings.

Standard

Aluminum Alloy, Rolled or Cold Finished Bars, Rods, and Wire 4.0Cu - 0.70Mn - 0.60Mg - 0.50Si (2017; -T4, -T451) Solution Heat Treated

2022-07-06

AMS4118M

This specification covers an aluminum alloy in the form of bars, rods, and wire 8.000 inches (203.20 mm) and under in nominal diameter and for squares, hexagons, octagons, and rectangles 50 in2 (322 cm2) and under in cross-sectional area and 8.000 inches (203.20 mm) and under in least distance between parallel sides (see 8.7).

Standard

Copper-Beryllium Alloy (Copper Alloy Numbers C17500 and C17510), Strip

2022-06-09

AS81021B

This specification covers the requirements for the acquisition of two alloys of copper-beryllium alloy strip, having higher electrical conductivity than copper-beryllium alloy strip normally used (see 6.1). All sizes of strip are covered by this specification.

Standard

Aluminum Alloy, Welding Wire, 7.0Si - 0.38Mg - 0.10Ti (4008 or 356)

2022-05-19

AMS4181D

This specification covers an aluminum alloy in the form of two types of welding wire.