Search Results

The toe-change of road-wheel, so-called compliance-steer(CS), caused by suspension compliance is proved to occur around a steady instantaneous center under steady run at constant speed. The adverse/proverse CS, that increases/decreases the side-slip angle versus the velocity vector of vehicle, is realized by locating the center rearward/forward of the axle. By designing the front/rear wheel CS as a proverse/adverse CS with nonlinear compliance that is large at on-center but small at off-center, vehicle characteristics to reduce lateral deviation caused by disturbance and to improve tracking performance are possible.

The driving performance of a vehicle with front wheel steering system is enhanced by controlling the gain and/or phase-lag characteristics. A vehicle with rear axle steering system has an even or higher effect than that. The compliance steer control effect in mechanical system is the key technology for enhancing the on-center stability Driver's error compensating system by steering and/or brake system control will be in future, and the manual and automonous control hybrid driving system will follow it.

This paper concerns the control of compliance steer for the rigid axle rear suspension of large-sized buses. The distortion of rear axle alignment (Compliance Steer) by the disturbances from the road surface is one of the biggest elements which disturb the running straightness of large-sized vehicles. By redesigning the compliance steer characteristics to generate counter axle steer when disturbances are applied, the stability of running straightness will be improved.

The running direction of a vehicle can be controlled by not only wheel steer but also torque steer. This paper introduces the tractive torque steer effect produced by a newly developed electropneumatic control system, the limited-slip differential for large-sized vehicles. This system enhances the vehicle's running stability and controllability by controlling the tractive force of the drive axle. The tractive force maintains a stable running course against disturbances such as road roughness and wind gusts, thereby enhancing the steering response and providing a better feeling of handling to the driver. The system also improves mobility. especially on low-μ roads. It is expected that a single axle equipped with this system will exhibit good performance comparable to that of tandem axle.