Search Results

Standard

Minimum Performance Standard Stall Warning Equipment

2020-12-22

CURRENT

AS8014A

This Aerospace Standard covers two basic Stall Warning Systems, one measures air flow and pressure distribution on the airfoil and the other measures the angle of airflow with respect to an arbitrary reference line. Each type of system includes, as a minimum, a sensor and the means for activating a device which warns the pilot of an impending stall.

Standard

Flight Director Equipment

2020-12-22

CURRENT

AS8008A

This Aerospace Standard covers Flight Director Equipments which display to the pilot a computed command for the operation of an aircraft in accordance with selected Mode(s). The term “Equipment” may include controls, displays, computers, etc. and may include sensors if furnished as a part of the Flight Director.

Standard

Flight Test Procedures for Static Pressure Systems Installed in Subsonic Transport Aircraft

2020-12-22

CURRENT

ARP921B

This SAE Aerospace Recommended Practice (ARP) covers the test procedures and equipment for performing flight testing on pitot-static systems installed in subsonic transport type aircraft.

Standard

Automatic Pilot Installations

2020-04-14

CURRENT

ARP419B

These recommendations cover the mechanical and electrical installation and installation test procedures for automatic pilots of the type normally used in transport type aircraft. The material in this ARP does not supercede any airworthiness requirement in the Civil Air Regulations.

Standard

Altitude Alerting Devices and Systems

2020-04-14

CURRENT

ARP1061B

This SAE Aerospace Recommended Practice (ARP) provides performance criteria for Altitude Alerting Devices and Systems. These devices can be self-contained or receive remote altitude information and can have integral or remote barometric corrections. Only the generation of the alerting signals is covered by this recommended practice and not the details of the visual or audio alerts operated by these signals. It is recommended that the system’s operational correspondence between the selected altitude settings of the Altitude Alerting Device and the Altitude Level Indication normally used to control the aircraft should not exceed ±250 ft RSS throughout the operating range of the device.

Standard

Compass System Installations

2020-04-14

CURRENT

ARP426B

These recommendations cover the mechanical and electrical installation and installation test procedures for Compass Systems of the type normally used in transport type aircraft. The recommendations in the ARP do not supersede any airworthiness requirements in Civil Air Regulations.

Standard

Aircraft Instrument and Instrument System Standards: Wording Terminology, Phraseology, Environment and Design Standards For

2020-02-20

CURRENT

AIR818E

This Aerospace Standard, (AS), specifies minimum performance standards for _____________ (Instrument or instrument systems) which are primarily intended for use with (vehicles capable of flight), ((fixed wing, rotary wing) aircraft)), (other special modifiers); (and whose purpose is to display _____________ information).

Standard

Indicator, Pressure, 1 1/2-Inch, Integrally Lighted

2012-08-22

CURRENT

AS23479A

This specification covers design requirements and all performance requirements for the procurement of single and dual hermetically sealed, integrally lighted, remote indicating, pressure indicators.

Standard

Accelerometer Group, Counting (MS25447 and MS25448)

2012-08-22

CURRENT

AS22145A

This specification covers the design and performance requirements for a single axis, four load-factor level counting accelerometer group referred to hereafter as “equipment.”

Standard

Compass; Magnetic, Pilot's Standby

2012-08-22

CURRENT

AS5604A

This specification covers the design requirements and all performance requirements for procurement of 1 7/8 inch dial pilot’s standby compasses as specified herein.

Standard

Fuel and Oil Quantity Instruments

2012-08-22

CURRENT

AS405D

This Aeronautical Standard covers two basic types of instruments as follows: Type I - Float Instruments Type II - Capacitance Instruments

Standard

FLIGHT TEST PROCEDURES FOR STATIC PRESSURE SYSTEMS INSTALLED IN SUBSONIC TRANSPORT AIRCRAFT

2011-08-10

HISTORICAL

ARP921

This Aerospace Recommended Practice covers the test procedures and equipment for performing flight testing on pitot-static systems installed in subsonic transport type aircraft.

Standard

Airstream Deviation Instrument (ADI)

2008-02-16

CURRENT

ARP794A

This recommended practice covers an instrument which measures and displays angle of deviation of the airstream dependent on mounting location on the aircraft.

Standard

Air Data Computers, MPS

2008-02-16

CURRENT

AS417A

This Standard covers air data equipment (hereinafter designated the instrument) which when connected to sources of aircraft electrical power, static pressure, total pressure and outside air temperature (singly or in combination) provides some or all of the following computed air data output signals: Pressure Altitude* Total Temperature* Pressure Altitude (Reporting) Altitude Rate Baro-Corrected Pressure Altitude* Overspeed Warning Vertical Speed* Altitude Hold Computed Airspeed* Airspeed Hold Mach Number* Mach Hold Maximum Allowable Airspeed* qc (impact pressure) Static Air Temperature (*when used as an alternate for total temperature) True Airspeed Others

Standard

Directional Indicating System (Turbine Powered Subsonic Aircraft)

2008-02-16

HISTORICAL

ARP416A

This recommended practice covers the requirements for gyroscopically stabilized Directional Indicating Systems, which will operate as a 1°/hour latitude corrected, free directional gyro or as a slaved gyro, magnetic compass with 1/2° accuracy.

Standard

Automatic Pilot Installations

2008-02-16

HISTORICAL

ARP419A

These recommendations cover the mechanical and electrical installation and installation test procedures for automatic pilots of the type normally used in transport type aircraft. The material in this ARP does not supercede any airworthiness requirement in the Civil Air Regulations.

Standard

Single-Degree-of-Freedom Spring-Restrained Rate Gyros

2008-02-16

CURRENT

AS1104

This specification covers that gyroscopic instrument normally defined as a "subminiature rate gyro." The rate gyro, when subjected to an angular rate about its input axis, provides an AC output voltage proportional to the angular rate. The subminiature size category generally includes gyro instruments of one (1) inch diameter or less and three and one-half (3 1/2) inches length or less. This specification defines the requirements for a subminiature spring-restrained, single-degree-of-freedom rate gyro for aircraft, missile, and spacecraft applications.

Standard

Remote Servoed Air Data Instruments for Subsonic Aircraft

2008-02-16

CURRENT

AS791

This standard provides minimum performance criteria for air data instruments intended to provide cockpit indication of: a Indicated airspeed (Vi) b Computer airspeed (Vc) c True airspeed (Vt) d Equivalent airspeed (Ve) e Mach number (M) f Altitude (H) g Vertical speed (Hpr) h Maximum operating limit speed (Vmo) i True angle of attack (αt) j Free air temperature (Tfat) k Total temperature (Tt) These functions shall be derived from a central air data computer (AS 417) and through system wiring applied to the respective indicator.

Standard

Minimum Performance Standard for Direction Instrument, Non-Magnetic (Gyroscopically Stabilized)

2008-02-16

CURRENT

AS8021

This document establishes the minimum requirements for design and qualification of equipment identified as Gyroscopically Stabilized Non-Magnetic Direction Instruments.

Standard

Minimum Performance Standard for Automatic Pressure Altitude Digitizer Equipment

2008-02-16

CURRENT

AS855

All automatic altitude reporting digitizer equipment manufactured under this standard shall comply with the requirements as specified up to its maximum range as indicated on the equipment nameplate.