Standard
Plating, Brush, Zinc-Nickel Low Hydrogen Embrittlement
2023-05-24
CURRENT
AMS2451/9C
This specification covers the requirements for brush plating of zinc-nickel by electrodeposition.
Search Results
Standard
Plating, Brush, Nickel Low-Stress, Low-Hardness Deposit
2022-11-22
CURRENT
AMS2451/3D
This specification covers the requirements for brush plating of low-hardness, low-stress nickel by electrodeposition.
Standard
Plating, Brush, Nickel Low Stress, Hard Deposit
2022-10-20
CURRENT
AMS2451/2B
This specification covers the requirements and process controls for brush plating of hard, low stress nickel by electrodeposition.
Standard
Plating, Nickel Hard Deposit
2022-07-19
CURRENT
AMS2423F
This specification covers the engineering requirements for electrodeposition of a hard nickel and the properties of the deposit.
Standard
Plating, Brush, Silver
2022-05-24
CURRENT
AMS2451/13A
This specification covers the engineering requirements and process for brush plating of silver by electrodeposition. It shall be used, in conjunction with AMS2451, for silver deposits.
Standard
Plating, Brush, Nickel Low Stress, Medium-Hardness Deposit
2022-01-21
CURRENT
AMS2451/7B
This specification covers the requirements for brush plating of medium-hardness, low stress nickel by electrodeposition.
Standard
Plating, Brush, Non-Cyanide Silver General Purpose
2022-01-21
CURRENT
AMS2451/8B
This specification covers the requirements for brush plating of non-cyanide silver by electrodeposition.
Standard
Plating, Brush, Nickel-Tungsten Low Hydrogen Embrittlement
2022-01-21
CURRENT
AMS2451/14
This specification covers the requirements for brush plating of nickel-tungsten by electrodeposition.
Standard
Plating, Brush, Nickel General Purpose
2022-01-21
CURRENT
AMS2451/1B
This specification establishes the requirements for a general-purpose brush plating of nickel applied by electrodeposition.
Standard
Alloy Verification and Chemical Composition Inspection of Welding Wire
2021-08-05
CURRENT
ARP4926B
This SAE Aerospace Recommended Practice (ARP) covers procedures for welding wire verification and conformance to specification composition.
Standard
Plating, Nickel General Purpose
2021-07-07
CURRENT
AMS2403R
This specification covers the engineering requirements for electrodeposition of nickel and the properties of the deposit.
Standard
Plating, Nickel Low-Stressed Deposit
2021-02-26
CURRENT
AMS2424G
This specification covers the requirements for electrodeposited low-stressed nickel.
Standard
Plating, Nickel General Purpose
2020-12-30
HISTORICAL
AMS2403P
This specification covers the engineering requirements for electrodeposition of nickel and the properties of the deposit.
Standard
Flux, Aluminum Welding
2019-08-20
CURRENT
AMS3414F
This specification covers an aluminum welding flux in the form of powder.
Standard
Hydrogen Embrittlement Relief (Baking) of Steel Parts
2018-10-18
CURRENT
AMS2759/9E
This specification covers the requirements for embrittlement relief (baking) of heat treated steel parts to remove hydrogen infused during plating and certain other chemical processing such as stripping, chemical milling, pickling, and etching.
Standard
Plating, Brush, Nickel Low Stress, Low-Hardness Deposit
2017-11-21
HISTORICAL
AMS2451/3C
This specification covers the requirements for brush plating of low-hardness, low-stress nickel by electrodeposition.
Standard
Electro-Deposition of Nickel for Engineering Purposes
2017-10-19
CURRENT
AMS03_27A
This SAE Standard specifies the requirements for the nickel-plating of ferrous metals, copper alloys, aluminum alloys and zinc alloys for one or more of the following purposes: a the production of wear-resistant surfaces; b the building up of worn or over-machined surfaces; c corrosion resistance; d to provide an undercoat for subsequent deposits, e.g., chromium.
Standard
The Pre-Treatment and Protection of Steel Items of Specified Maximum Tensile Strength Exceeding 1450 MPa
2017-03-21
CURRENT
AMS03_4A
This SAE Standard specifies the special treatments and precautions that are to be observed when protective and other surface treatments are applied to items, including springs, made from steel of specified maximum tensile strength exceeding 1450 MPa. The requirements of this Standard qualify those in process specifications and override the latter where there is conflict. The Standard also gives advice on design, manufacture, and preparation of items prior to cleaning and protection.
Standard
Plating, Brush, Nickel Low Stress, Low-Hardness Deposit
2016-11-29
HISTORICAL
AMS2451/3B
This specification covers the requirements for brush plating of low-hardness, low-stress nickel by electrodeposition.
Standard
Electro-Deposition of Nickel for Engineering Purposes
2015-05-21
HISTORICAL
AMS03_27
This SAE Standard specifies the requirements for the nickel-plating of ferrous metals, copper alloys, aluminum alloys and zinc alloys for one or more of the following purposes: a the production of wear-resistant surfaces; b the building up of worn or over-machined surfaces; c corrosion resistance; d to provide an undercoat for subsequent deposits, e.g., chromium.
