Search Results

Standard

Aluminum Alloy, Discontinuously Reinforced Hot Isostatically Pressed Shapes 6061B/SiC/40p (3 μm) (T1P)

2023-03-08

CURRENT

AMS4368A

This specification covers discontinuously reinforced aluminum alloy (DRA) metal matrix composites (MMC) made by mechanical alloying of 6061B aluminum powder and SiC particulate, which is then consolidated by Hot Isostatic Pressing (HIP) into shapes between 12 to 100 square inches (0.008 to 0.065 m2), inclusive, cross-section. Tensile property response to heat treatment has been demonstrated on samples of 1 square inch (645 mm2) maximum cross section (see 8.9).

Standard

Aluminum, Foil and Light Gage Sheet 99.45Al (1145-0) Annealed

2022-08-05

CURRENT

AMS4011E

This specification covers aluminum in the form of foil and light gage sheet.

Standard

Aluminum Alloy, Discontinuously Reinforced Hot Isostatically Pressed Shapes 2124A/SiC/25p (3µm) (T1P)

2021-07-20

WIP

AMS4355A

This specification covers discontinuously reinforced aluminum alloy (DRA) metal matrix composites (MMC) made by mechanical alloying of the 2124A powder and SiC particulate, which is then consolidated by Hot Isostatic Pressing (HIP) into shapes less than 62 in2 (0.04 m2) cross-section (see 8.11).

Standard

Core, Flexible Honeycomb, Aluminum Alloy, Treated for Sandwich Construction 5052, 350 Fahrenheit (177 Celsius)

2021-07-07

CURRENT

AMS4178G

This specification covers an aluminum alloy in the form of honeycomb core in a non-hexagonal, flexible cell configuration, the core being treated for increased corrosion resistance and furnished only in the expanded form.

Standard

Aluminum Alloy, Bar, Rod, Shapes, Structural Shapes, Tube, and Wire, Extruded: General Specification for

2019-11-19

CURRENT

AMSQQA200C

This specification covers the general requirements for aluminum alloy bar, rod, shapes, structural shapes, tube, and wire extruded. Specific requirements for these products in a particular alloy are covered by the applicable detailed specification (See 6.3).

Standard

Bearings, Sintered Metal Powder 89Cu – 10Sn Oil Impregnated

2018-08-23

CURRENT

AMS4805F

This specification covers one type of sintered metal powder in the form of oil-impregnated bearings.

Standard

Core, Flexible Honeycomb, Aluminum Alloy For Sandwich Construction 5056, 350 (177)

2018-08-06

CURRENT

AMS4177E

This specification covers an aluminum alloy in the form of honeycomb core in a non-hexagonal, flexible cell configuration, the core being treated for increased corrosion resistance and furnished only in the expanded form.

Standard

Core, Flexible Honeycomb, Aluminum Alloy, Treated for Sandwich Construction 5052, 350 (177)

2018-08-06

HISTORICAL

AMS4178F

This specification covers an aluminum alloy in the form of honeycomb core in a non-hexagonal, flexible cell configuration, the core being treated for increased corrosion resistance and furnished only in the expanded form.

Standard

Core, Honeycomb, Aluminum Alloy, Corrosion Inhibited For Sandwich Construction 5056, 350 (177)

2018-08-03

CURRENT

AMS4349E

This specification covers bonded honeycomb core made of aluminum alloy and supplied in the form of blocks, slices, or other configurations as ordered.

Standard

Tube, Aluminum and Aluminum Alloy, Drawn, Seamless, General Specification for

2018-02-15

CURRENT

AMSWWT700B

This specification covers the general requirements for aluminum and aluminum alloy tube; drawn, seamless (see 6.1.1). Specific requirements for these products in a particular alloy are covered by the applicable detail specification (see 6.3).

Standard

Polyalkylene Glycol Heat Treat Quenchant

2018-01-18

CURRENT

AMS3025E

This specification covers two types of polyalkylene glycol in the form of a liquid.

Standard

Core, Honeycomb, Aluminum Alloy, Corrosion Inhibited For Sandwich Construction 5052, 350 (177)

2018-01-09

CURRENT

AMS4348E

This specification covers bonded honeycomb core made of aluminum alloy and supplied in the form of blocks, slices, or other configurations as ordered.

Standard

Aluminum and Aluminum Alloy, Bar, Rod, Wire, or Special Shapes; Rolled, Drawn, or Cold Finished; General Specification For

2018-01-04

CURRENT

AMSQQA225C

This specification covers the general requirements for aluminum and aluminum alloy bar, rod, wire, or special shapes; rolled, drawn, or cold finished. Specific requirements for these products are covered by the applicable detail specification (See 6.3).

Standard

Copper Powder 99.0 Cu, Minimum As Fabricated

2017-11-14

HISTORICAL

AMS4740D

This specification covers elemental copper in the form of powder.

Standard

Aluminum Alloy, Discontinuously Reinforced Hot Isostatically Pressed Shapes 6061B/SiC/40p (3μm) (T1P)

2017-07-14

HISTORICAL

AMS4368

This specification covers discontinuously reinforced aluminum alloy (DRA) metal matrix composites (MMC) made by mechanical alloying of 6061B aluminum powder and SiC particulate, which is then consolidated by Hot Isostatic Pressing (HIP) into shapes between 12 to 100 in2 (0.008 to 0.065 m2) cross-section inclusive. Tensile property response to heat treatment has been demonstrated on samples of 1 in2 (645 mm2) maximum cross section (see 8.9).

Standard

Aluminum Alloy Foil 1.0Mg - 0.6Si - 0.30Cu - 0.20Cr (6061-0) Annealed

2017-05-30

CURRENT

AMS4009C

This specification covers an aluminum alloy in the form of foil.

Standard

Aluminum Alloy, Sheet 6.5Fe - 1.3Si - 0.60V (8022-H112) Powder Metallurgy Product, Strain Hardened

2017-05-25

CURRENT

AMS4266B

This specification covers an aluminum alloy powder metallurgy product in the form of sheet 0.010 to 0.250 inch (0.25 to 6.35 mm) in nominal thickness.

Standard

Tin - Lead Eutectic 63Sn - 37Pb

2017-04-20

CURRENT

AMS4751D

This specification covers a tin-lead alloy in the form of bars, ingots, pellets, ribbon, and round wire.

Standard

Aluminum Alloy Extrusions 8.6Fe - 1.8Se - 1.3V (8009-H112) Powder Metallurgy Product, Strain-Hardened

2017-04-04

CURRENT

AMS4309B

This specification covers an aluminum alloy powder metallurgy product in the form of round extrusions up to 3.5 inches (89 mm) in diameter and rectangular and other solid extrusions up to 10 square inches (64.5 cm2) in cross-sectional area. The maximum extrusion length is 100 inches (2.5 m).

Standard

Aluminum Alloy, Sheet 8.6Fe - 1.8Si - 1.3V (8009-H112) Powder Metallurgy Product, Strain Hardened

2017-04-04

CURRENT

AMS4308B

This specification covers an aluminum alloy powder metallurgy product in the form of sheet 0.010 to 0.250 inch (0.25 to 6.35 mm) in nominal thickness.