Refine Your Search

Date

Date

Topic

Topic

Aircraft structures AMS E Carbon and Low Alloy Steels Committee Cutting Technical review

Search Results

Viewing 1 to 20 of 179
123Next >Last >>
Sort by published
Standard

Control of Forgings Requiring First Article Approval
2022-09-23
CURRENT
AMS2375F
This specification covers procedures for obtaining first-article (preproduction) approval of forgings and the controls to be exercised in producing subsequent production forgings.
Standard

Low Stress Grinding of Steel Parts Heat Treated to 180 ksi or Over, and Low Stress Grinding of Chrome Plating Applied to Steel Parts Heat Treated to 180 ksi or Over
2022-09-08
CURRENT
AMS2453A
The purpose of this specification is to establish requirements of a grinding method and to provide grinding parameters that will eliminate or minimize overheating, cracking, high residual tensile stresses, and/or other metallurgical changes that decrease structural integrity of steel parts or chrome plated steel parts (see 8.3). This standard establishes requirements for low stress grinding of martensitic high strength steel heat-treated to 180 ksi (1241 MPa) minimum ultimate tensile strength (UTS) and above, and requirements for low stress grinding of chromium plating applied to such high strength steel.
Standard

Steel, Bars 0.90 - 1.03C
2022-01-28
CURRENT
AMS5132M
This specification covers a high-carbon steel in the form of bars.
Standard

Tolerances Carbon Steel, Sheet, Strip, and Plate
2021-09-29
CURRENT
AMS2232H
This specification covers established inch/pound manufacturing tolerances applicable to carbon steel sheet, strip, and plate ordered to inch/pound dimensions. These tolerances apply to all conditions unless otherwise noted. The term “excl” is used to apply only to the higher figure of the specified range. Tolerances for product sizes not listed herein shall be as agreed upon by purchaser and vendor.
Standard

Tolerances Low-Alloy Steel Sheet, Strip, and Plate
2021-09-29
CURRENT
AMS2252E
This specification covers established inch/pound manufacturing tolerances applicable to low-alloy steel sheet, strip, and plate ordered to inch/pound dimensions. These tolerances apply to all conditions unless otherwise noted. The term “excl” is used to apply only to the higher figure of the specified range.
Standard

Chord Method of Evaluating Surface Microstructural Characteristics
2021-05-19
CURRENT
ARP1820C
This practice provides a method for evaluating microhardness and microstructure very close (0.002 inch (0.051 mm) or less) to the surface of a disk specimen. Specific accept/reject criteria for partial decarburization (3.7.1), inadvertent carburization/nitriding (3.7.3), total decarburization/intergranular oxidation (3.8), and other characteristics evaluated are to be found in the applicable specification where this ARP is referenced.
Standard

Low Stress Grinding of Steel Parts Heat Treated to 180 ksi or Over, and Low Stress Grinding of Chrome Plating Applied to Steel Parts Heat Treated to 180 ksi or Over
2020-09-21
HISTORICAL
AMS2453
The purpose of this specification is to establish requirements of a grinding method and to provide grinding parameters that will eliminate or minimize overheating, cracking, high residual tensile stresses, and/or other metallurgical changes that decrease structural integrity of steel parts or chrome plated steel parts (See 8.2). This standard establishes requirements for low stress grinding of martensitic high strength steel heat-treated to 180 ksi (1241 MPa) minimum ultimate tensile strength (UTS) and above, and requirements for low stress grinding of chromium plating applied to such high strength steel.
Standard

Tolerances Carbon Steel Bars
2019-05-29
CURRENT
AMS2231K
This specification covers established inch/pound manufacturing tolerances applicable to carbon steel bars ordered to inch/pound dimensions. These tolerances apply to all conditions, unless otherwise noted. The term “excl” applies only to the higher figure of the specified range.
Standard

Wire, Steel 0.18 - 0.23C (SAE 1020) Annealed
2019-04-02
CURRENT
AMS5032H
This specification covers a low-carbon steel in the form of wire up to 0.249 inch (6.32 mm), incl supplied as coils of wire or, when specified, as straight lengths.
Standard

Tolerances Low-Alloy Steel Bars
2018-11-05
CURRENT
AMS2251J
This specification covers established inch/pound manufacturing tolerances applicable to low-alloy steel bars ordered to inch/pound dimensions. These tolerances apply to all conditions, unless otherwise noted. The term “exclusive” is used to apply only to the higher figure of the specified range.
Standard

Control of Forgings Requiring First Article Approval
2017-07-10
HISTORICAL
AMS2375E
This specification covers procedures for obtaining first-article (preproduction) approval of forgings and the controls to be exercised in producing subsequent production forgings.
123Next >Last >>
X