Search Results

This AIR is limited to the requirements of AS50881 and examines these requirements, providing rationale behind them. AS50881 is only applicable to the aircraft EWIS. Pods and other devices that can be attached to an aircraft are considered as part of the aircraft equipment design. Its scope does not include wiring inside of airborne electronic equipment but does apply to wiring externally attached to such equipment. The AS50881 scope does not include attached devices but does include the interface between the pod/equipment and aircraft wiring. Section 3.3.5 addresses components such as antennas and other similar equipment that were once supplied as Government Furnished Aeronautical/Aerospace Equipment (GFAE).

The purpose of this report is to provide information on the results of ultraviolet (UV) laser marking and mark contrast measurement of a wide range of aerospace wire and cable constructions, the specifications for most of which do not state specific requirements for laser markability. The contents of this document are for information and guidance only. It is not intended that it be used as the basis for marking process specifications or standards, which are covered by AS5649.

The SAE Aerospace Information Report (AIR) focuses on the impact of alkali metal-based runway deicers (potassium acetate, potassium formate, and sodium acetate, and sodium formate) have on in-service aircraft EWIS components.

The thermal modeling guidelines and best practices provided in this document are applicable to powered aerospace vehicle wires and wire bundles in thermal environments ranging from -65 to +260 °C (-85 to +500 °F) and pressures ranging from sea level to space vacuum. Currently the ARP only considers steady state and direct current conditions. The effects of wiring terminations and connectors are not addressed. Both can significantly impact the overall current derating and safety margins for a wiring system.

This document covers the general recommendations for Transverse Electromagnetic Mode (TEM) Transmission Lines intended for use in airborne systems (see 6.2.14). For U.S military applications, TEM Transmission Lines shall meet the requirements in accordance with MIL-T-81490. The follow index lists the recommended requirements and methods covered by the Aerospace Recommended Practice (ARP):

This SAE Aerospace Information Report (AIR) is limited to the requirements of AS50881 and examines these requirements, providing rationale behind them. AS50881 is only applicable to the aircraft electrical wiring and interconnect system (EWIS). Pods and other devices that can be attached to an aircraft are considered as part of the aircraft equipment design. Its scope does not include wiring inside of airborne electronic equipment, but does apply to wiring externally attached to such equipment. The AS50881 scope does not include attached devices but does include the interface between the pod/equipment and aircraft wiring. 3.3.5 addresses components such as antennas and other similar equipment that were once supplied as Government Furnished Aeronautical/Aerospace Equipment (GFAE).

This standard is applicable to the marking of aerospace vehicle electrical wires and cables using ultraviolet (UV) lasers. This standard specifies the process requirements for the implementation of UV laser marking of aerospace electrical wire and cable and fiber optic cable to achieve an acceptable quality mark using equipment designed for UV laser marking of identification codes on aerospace wire and cable. Wiring specified as UV laser markable subject to AS4373 and which has been marked in accordance with this standard will conform to the requirements of AS50881.

The purpose of this report is to provide information on the results of ultra violet (UV) laser marking and mark contrast measurement of a wide range of aerospace wire and cable constructions, the specifications for most of which do not state specific requirements for laser markability. The contents of this document are for information and guidance only. It is not intended that it be used as the basis for marking process specifications or standards, which are covered by AS5649 Wire and Cable Marking Process, UV Laser.

This standard is applicable to the marking of aerospace vehicle electrical wires and cables using ultraviolet (UV) lasers. This standard specifies the process requirements for the implementation of UV laser marking of aerospace electrical wire and cable and fiber optic cable to achieve an acceptable quality mark using equipment designed for UV laser marking of identification codes on aerospace wire and cable. Wiring specified as UV laser markable subject to AS4373 Test Methods for Insulated Electric Wire and which has been marked in accordance with this standard will conform to the requirements of AS50881.

Ultraviolet (UV) laser marking for aerospace wire and cable is now a well established and accepted process. The purpose of this report is to provide general information on the technical basis of marking systems that apply UV laser energy to the wire surface. This includes materials for UV laser marking; the key characteristics of UV lasers suitable for this application, in terms of the mark process requirements and operational requirements; the various types of UV lasers which meet the general requirements for wire marking; and the generic components of UV laser marking systems. Subjects beyond the scope of this report include other wire marking systems not utilizing UV lasers; legibility; and contrast measurement. The contents of this document are for information only. It is not intended that it should be used as the basis for marking process specifications or standards, which are covered by AS5469 Wire and Cable Marking Process, UV Laser.

Ultraviolet (UV) laser marking for aerospace wire and cable is now a well established and accepted process. The purpose of this report is to provide general information on the technical basis of marking systems that apply UV laser energy to the wire surface. This includes materials for UV laser marking; the key characteristics of UV lasers suitable for this application, in terms of the mark process requirements and operational requirements; the various types of UV lasers which meet the general requirements for wire marking; and the generic components of UV laser marking systems. Subjects beyond the scope of this report include other wire marking systems not utilizing UV lasers; legibility; and contrast measurement. The contents of this document are for information only. It is not intended that it should be used as the basis for marking process specifications or standards, which are covered by AS5469 Wire and Cable Marking Process, UV Laser.

Ultraviolet (UV) laser marking for aerospace wire and cable is now a well established and accepted process. The purpose of this report is to provide general information on the technical basis of marking systems that apply UV laser energy to the wire surface. This includes materials for UV laser marking; the key characteristics of UV lasers suitable for this application, in terms of the mark process requirements and operational requirements; the various types of UV lasers which meet the general requirements for wire marking; and the generic components of UV laser marking systems. Subjects beyond the scope of this report include other wire marking systems not utilizing UV lasers; legibility; and contrast measurement.