Search Results

Standard

Aluminum Alloy Extrusions, 7.7Zn - 2.4Mg - 1.6Cu - 0.16Cr (7049-T73511), Solution Heat Treated, Stress Relieved, and Overaged

2024-03-22

CURRENT

AMS4157F

This specification covers an aluminum alloy in the form of extruded bars, rods, wire, shapes, and tubing 5.000 inches (127.00 mm) and under in nominal diameter or least thickness (wall thickness of tubing) (see 8.5).

Standard

Aluminum Alloy, Clad Two Sides Sheet 0.6Mg - 0.35Si - 0.28Cu (No. 22 Brazing Sheet) As Fabricated

2023-12-20

CURRENT

AMS4256D

This specification covers an aluminum alloy in the form of sheet 0.010 to 0.249 inch (0.25 to 6.32 mm), inclusive, in nominal thickness, clad on two sides (see 8.5).

Standard

Aluminum Alloy, Extruded Profiles (7055-T77511) 8.0Zn - 2.3Cu - 2.0Mg - 0.16Zr Solution Heat Treated, Stress Relieved, and Overaged

2023-12-13

CURRENT

AMS4337C

This specification covers an aluminum alloy in the form of extruded profiles (shapes) 0.500 to 1.500 inch (12.7 to 38.1 mm), inclusive, in nominal thickness, and having a maximum cross-sectional area of 20 square inches (129 cm2) and a maximum circle size of 10 inches (254 mm) (see 8.7).

Standard

Aluminum Alloy Sheet and Plate, 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr, 7075: (-T73 Sheet, -T7351 Plate), Solution Heat Treated and Overaged

2023-11-10

CURRENT

AMS4078L

This specification covers an aluminum alloy in the form of sheet and plate over 0.039 to 4.000 inches (over 0.991 to 101.60 mm), inclusive, in thickness (see 8.6).

Standard

Brass, Naval, Bars and Rods, 60.5Cu - 38.5Zn - 0.75Sn, Hard Temper (H04)

2023-10-16

CURRENT

AMS4612L

This specification covers a copper alloy (naval brass) in the form of bars and rods.

Standard

Aluminum Alloy, Drawn, Round, Seamless, Tubing 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-O) Close Tolerance, Annealed

2023-08-01

CURRENT

AMS4079J

This specification covers an aluminum alloy in the form of drawn, round, seamless tubing with wall thickness of 0.018 to 0.500 inch (0.46 to 12.70 mm), inclusive (see 8.6).

Standard

Aluminum Alloy, Drawn Seamless Tubing 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-O) Annealed

2023-08-01

CURRENT

AMS4080R

This specification covers an aluminum alloy in the form of drawn seamless tubing in the annealed (O) condition. This specification covers products from 0.018 to 0.500 inch (0.46 to 12.70 mm) in wall thickness (see 8.6).

Standard

Tolerances Copper and Copper Alloy Wire

2023-06-13

CURRENT

AMS2224H

This specification covers established inch/pound manufacturing tolerances applicable to copper and copper alloy wire ordered to inch/pound dimensions. These tolerances apply to all conditions, unless otherwise noted.

Standard

Aluminum Alloy, Welding Wire 5.0Si - 1.2Cu - 0.50Mg (C355.0)

2023-05-10

CURRENT

AMS4245G

This specification covers an aluminum alloy in the form of welding wire.

Standard

Tolerances Copper and Copper Alloy Sheet, Strip, and Plate

2023-05-10

CURRENT

AMS2222L

This specification covers established inch/pound manufacturing tolerances applicable to copper and copper alloy sheet, strip, and plate ordered to inch/pound dimensions. These tolerances apply to all conditions, unless otherwise noted.

Standard

Bronze, Aluminum Silicon, Rods, Bars, and Forgings 90Cu - 7.0Al - 1.8Si Drawn and Stress Relieved (HR50)

2023-03-08

CURRENT

AMS4633C

This specification covers one type of aluminum silicon bronze in the form of rods and bars up to 3.00 inches (76.2 mm), inclusive, in nominal diameter or distance between parallel sides, and forgings and forging stock of any size (see 8.5).

Standard

Heat Treatment of Aluminum Alloy Raw Materials

2023-03-08

CURRENT

AMS2772H

This specification covers requirements and recommendations for the heat treatment of wrought aluminum alloy raw materials (see 2.2.1) by producers. It supersedes AMS-H-6088 and replaces MIL-H-6088.

Standard

Phosphor Bronze Bars, Rods, and Tubing 95Cu - 5Sn Hard Temper

2023-02-14

CURRENT

AMS4625J

This specification covers one type of bronze in the form of bars and rods of any size, and tubing over 1.00 inch (25.4 mm) in nominal outer diameter (see 8.5).

Standard

Silver Alloy, Brazing Filler Metal 54Ag - 40Cu - 5.0Zn - 1.0Ni 1325 to 1575 °F (718 to 857 °C) Solidus-Liquidus Range

2023-01-17

CURRENT

AMS4772L

This specification covers a silver alloy in the form of wire, rod, sheet, strip, foil, pig, powder, shot, and chips and a viscous mixture (paste) of powder in a suitable binder.

Standard

Tolerances Copper and Copper Alloy Bars and Rods

2023-01-17

CURRENT

AMS2221H

This specification covers established inch/pound manufacturing tolerances applicable to bars and rods of copper and copper alloys ordered to inch/pound dimensions. These tolerances apply to all conditions, unless otherwise noted. The term “exclusive” is used to apply only to the higher figure of a specified range.

Standard

Aluminum Alloy, Plate 7.9Zn - 1.2Cu - 2.1Mg - 0.10Zr (7097-T7651) Solution Heat Treated, Stress Relieved, and Overaged

2022-12-16

CURRENT

AMS4365A

This specification covers an aluminum alloy in the form of plate from 3.000 to 8.000 inches (76.20 to 203.20 mm) in thickness (see 8.5).

Standard

Aluminum Alloy, Plate (2297-T87) 2.8Cu - 1.5Li - 0.30Mn - 0.12Zr Solution Heat Treated, Stretched, and Artificially Aged

2022-12-07

CURRENT

AMS4330E

This specification covers an aluminum alloy in the form of plate 1.500 to 6.000 inches (38.1 to 152.40 mm) thick (see 8.5).

Standard

Aluminum Alloy, Extruded Profiles, 8.9Zn - 2.2Cu - 2.2Mg - 0.15Zr (7136-T74511), Solution Heat Treated, Stress Relieved by Stretching, Straightened, and Overaged

2022-11-02

CURRENT

AMS4367A

This specification covers an aluminum alloy in the form of extruded rods, bars, and profiles (shapes) 0.040 to 4.500 inches (1.02 to 114.30 mm), inclusive, in thickness produced with maximum cross sectional area of 56.1 square inches (36199 mm2) and a maximum circumscribing circle diameter (circle size) of 24.4 inches (620 mm) (see 2.4.1 and 8.6).

Standard

Brass, Seamless, Tubing 85Cu - 15Zn Annealed (O61)

2022-11-02

CURRENT

AMS4553E

This specification covers a copper alloy (brass) in the form of seamless tubing with nominal OD of 0.405 inch (10.29 mm) to 10.75 inches (273.05 mm) and nominal weight of 0.253 lb/ft (0.38 kg/m) to 66.142 lb/ft (98.43 kg/m) (see 8.6).

Standard

Aluminum Alloy, Extruded Profiles 8.9Zn - 2.2Cu - 2.2Mg - 0.15Zr (7136-T73511) Solution Heat Treated, Stress Relieved by Stretching, Straightened, and Overaged

2022-11-02

CURRENT

AMS4374A

This specification covers an aluminum alloy in the form of extruded rods, bars, and profiles (shapes) 0.040 to 4.500 inches (1.02 to 114.30 mm), inclusive, in thickness produced with maximum cross sectional area of 56.1 square inches (36193 mm2) and a maximum circumscribing circle diameter (circle size) of 20.2 inches (513 mm) (see 2.4.1).