Search Results

Standard

Steel, Corrosion Resistant, Bars, Wire, Forgings and Forging Stock 15.2Cr - 1.0Mo - 0.40N - (0.28 - 0.34C) Consumable Electrode Melted Under Pressure

2024-03-27

CURRENT

AMS5898C

This specification covers a premium aircraft-quality, corrosion-resistant steel in the form of bars, wire, forgings, and forging stock.

Standard

Steel, Corrosion- and Heat-Resistant, Seamless or Welded Hydraulic Tubing 18.5Cr - 10.5Ni - 0.55Ti (321) Solution Heat Treated and Cold Drawn, 1/8 Hard Temper

2022-09-08

CURRENT

AMS5896C

This specification covers a corrosion- and heat-resistant steel in the form of two types of thin-wall, close-tolerance hydraulic tubing 0.125 to 2.00 inches (3.18 to 50.8 mm), inclusive, in nominal OD.

Standard

Steel, Corrosion Resistant, Seamless Tubing, 19Cr - 10Ni (304), Solution Heat Treated

2022-01-21

CURRENT

AMS5560P

This specification covers a corrosion-resistant steel in the form of seamless tubing.

Standard

Steel, Corrosion Resistant, Seamless or Welded Hydraulic Tubing 19Cr - 10Ni (304) High Pressure, Cold Drawn

2021-10-22

CURRENT

AMS5566N

This specification covers a corrosion-resistant steel in the form of two types of tubing.

Standard

Tolerances Corrosion and Heat-Resistant Steel Tubing

2021-06-29

CURRENT

AMS2243L

This specification covers manufacturing tolerances applicable to seamless and welded tubing of corrosion and heat-resistant steel. These tolerances apply to all conditions and are based on individual measurements, unless otherwise noted. Tubing may be specified by two dimensions only (OD and wall thickness, ID and wall thickness, or OD and ID).

Standard

Heat Treatment of Parts in a Vacuum

2020-09-22

CURRENT

AMS2769D

This specification establishes the requirements and procedures for heat treating parts in vacuum/partial pressure and shall be used as a supplementary document to primary heat treating specifications as applicable.

Standard

Heat Treatment of Parts in a Vacuum

2019-07-12

HISTORICAL

AMS2769C

This specification establishes the requirements and procedures for heat treating parts in vacuum/partial pressure and shall be used as a supplementary document to primary heat treating specifications as applicable.

Standard

Heat Treatment of Parts in a Vacuum

2014-04-23

HISTORICAL

AMS2769B

This specification establishes the requirements and procedures for heat treating parts (See 8.4) in a vacuum/partial pressure.

Standard

Tubing, Steel, Corrosion-Resistant (S30400), Aerospace Vehicle Hydraulic System 1/8 Hard Condition

2013-07-31

CURRENT

AMST6845B

This specification presents requirements for thin-walled (inside diameter greater than four times the wall thickness and outside diameter 1/4 inch and larger) corrosion-resistant steel tubing in approximately the 1/8 hard condition, of special quality, suitable for use in high-pressure hydraulic systems.

Standard

Tolerances Corrosion and Heat-Resistant Steel Tubing

2013-06-05

HISTORICAL

AMS2243K

This specification covers manufacturing tolerances applicable to seamless and welded tubing of corrosion and heat-resistant steel ordered to inch dimensions. These tolerances apply to all conditions and are based on individual measurements, unless otherwise noted. Tubing may be specified by two dimensions only (OD and wall thickness, ID and wall thickness, or OD and ID).

Standard

Tolerances Corrosion and Heat-Resistant Steel Tubing

2010-11-30

HISTORICAL

AMS2243J

This specification covers manufacturing tolerances applicable to seamless and welded tubing of corrosion and heat-resistant steel ordered to inch dimensions. These tolerances apply to all conditions and are based on individual measurements, unless otherwise noted. Tubing may be specified by two dimensions only (OD and wall thickness, ID and wall thickness, or OD and ID).

Standard

Heat Treatment of Parts in a Vacuum

2008-05-01

HISTORICAL

AMS2769A

This specification establishes the requirements and procedures for heat treating parts (See 8.4) in a vacuum/partial pressure.

Standard

Tubing, Steel, Corrosion-Resistant (S30400), Aerospace Vehicle Hydraulic System 1/8 Hard Condition

2007-12-17

HISTORICAL

AMST6845A

This specification presents requirements for thin-walled (inside diameter greater than four times the wall thickness and outside diameter 1/4 inch and larger) corrosion-resistant steel tubing in approximately the 1/8 hard condition, of special quality, suitable for use in high-pressure hydraulic systems.

Standard

Tolerances Corrosion and Heat-Resistant Steel Tubing

2006-05-16

HISTORICAL

AMS2243H

This specification covers manufacturing tolerances applicable to seamless and welded tubing of corrosion and heat-resistant steel ordered to inch dimensions. These tolerances apply to all conditions and are based on individual measurements, unless otherwise noted. Tubing may be specified by two dimensions only (OD and wall thickness, ID and wall thickness, or OD and ID).

Standard

Heat Treatment of Parts in a Vacuum

2001-11-15

HISTORICAL

AMS2769

This specification establishes the requirements and procedures for heat treating parts (See 8.3) in a vacuum/partial pressure.

Standard

Tubing, Steel, Corrosion-Resistant (S30400), Aerospace Vehicle Hydraulic System 1/8 Hard Condition

1999-01-01

HISTORICAL

AMST6845

This specification presents requirements for thin-walled (inside diameter greater than four times the wall thickness and outside diameter 1/4 inch and larger) corrosion-resistant steel tubing in approximately the 1/8 hard condition, of special quality, suitable for use in high-pressure hydraulic systems.

Standard

STEEL TUBING, SEAMLESS OR WELDED, CORROSION RESISTANT 19Cr - 10Ni (SAE 30304) High Pressure Hydraulic

1963-07-01

HISTORICAL

AMS5566D

Standard

Steel, Corrosion Resistant, Seamless or Welded Hydraulic Tubing, 19Cr - 10Ni (SAE 30304) High Pressure, Cold Drawn

1955-08-01

HISTORICAL

AMS5566C

Standard

STEEL TUBING, CORROSION RESISTANT 19Cr - 10Ni (SAE 30304) High Pressure Hydraulic

1951-10-01

HISTORICAL

AMS5566B

Standard

STEEL TUBING, CORROSION RESISTANT High Pressure Hydraulic 18 Cr - 8 Ni

1946-11-01

HISTORICAL

AMS5566A