Refine Your Search

Date

Date

Topic

Topic

Alternative fuels Fuel economy Methane Manufacturing processes A-6C1 Fluids and Contamination Control Committee Single cylinder engines

Search Results

Viewing 1 to 20 of 29
12Next >Last >>
Sort by published
Standard

Filter Element Cleaning Methods
2020-10-09
CURRENT
AIR787B
This SAE Aerospace Information Report (AIR) provides technical information to assist the development of specific cleaning methods for those filter elements which are designated as "cleanable" and cannot be cleaned by simple and obvious procedures.
Standard

Aerospace Hydraulic Fluids Physical Properties
2018-08-16
CURRENT
AIR1362D
This SAE Aerospace Information Report (AIR) presents data on hydraulic fluids which are of interest to detail designers of hydraulic systems and components for aerospace flight vehicles. The data pertains to fluids conforming to the following specifications: MIL-PRF-5606 MIL-H-8446 MIL-PRF-27601 (canceled) MIL-PRF-27601 has been canceled without replacement and the data presented herein is for information purposes only. MIL-PRF-83282 MIL-H-53119 MIL-PRF-87257 AS1241 Type IV, Classes 1 and 2, and Type V
Standard

Aerospace Hydraulic Fluids Physical Properties
2016-11-01
HISTORICAL
AIR1362C
This SAE Aerospace Information Report (AIR) presents data on hydraulic fluids which are of interest to detail designers of hydraulic systems and components for aerospace flight vehicles. The data pertains to fluids conforming to the following specifications: MIL-PRF-5606 MIL-H-8446 MIL-PRF-27601 (canceled) MIL-PRF-27601 has been canceled without replacement and the data presented herein is for information purposes only. MIL-PRF-83282 MIL-H-53119 MIL-PRF-87257 AS1241 Type IV, Classes 1 and 2, and Type V
Standard

Sensitization and Corrosion in Stainless Steel Filters
2014-02-06
CURRENT
AIR844B
This document reviews briefly the subject of woven metal screens. Conditions that can promote damaging corrosion in stainless steel filter screens are discussed and recommendations are listed for minimizing corrosion damage. This is a general document only; for specific applications it is suggested that the reader refer to the technical literature, and selected references listed below.
Standard

Filter Element Cleaning Methods
2013-10-08
HISTORICAL
AIR787A
This SAE Aerospace Information Report (AIR) provides technical information to assist the development of specific cleaning methods for filter elements. Consideration is limited to filter elements which are designated as "cleanable" (not "disposable"), but which cannot be cleaned by simple and obvious procedures. Cleaning methods developed according to this report should be evaluated by the methods of ARP725. Satisfactory cleaning methods can be developed for most "cleanable" filter elements. Technical or economic feasibility of the cleaning method may be limited, however, by incompatibility of filter-element construction materials, by mechanical weakness or lack of corrosion resistance to withstand repeated or continued cleaning, or by the presence of unusually tenacious contamination. These factors must be considered when selecting approaches to the development of specific methods.
Standard

Secondary Filters for Fluid System Reliability
2012-09-24
CURRENT
AIR4057B
This SAE Aerospace Information Report (AIR) discusses the design choices and engineering trade-offs available to the system designer in the efficient selection and application of Last-Chance filters in contrast to main or primary system filters.
Standard

Fine Wire Mesh for Filter Elements
2012-09-24
CURRENT
AIR888C
This SAE Aerospace Information Report (AIR) discusses the terminology, types, method of manufacture and chemistry of the fine wire meshes used for filtration of hydraulic, lubrication fuel systems, and similar applications. Information contained herein may be used for quality assurance testing to insure that a high performance filter grade wire mesh is acceptable for use in an aerospace application.
Standard

HYDRAULIC FLUID CHARACTERISTICS
2011-08-10
HISTORICAL
AIR81
This report discusses the characteristics of hydraulic fluids and evaluates their importance, not only from the standpoint of fluid formulation, but also in their effect on aero-space hydraulic system design and the materials used in the components of the system. In some cases numerical parameter limits are suggested, but, in general, the effect of a parameter is the basic consideration. Not only must the characteristics of the fluid be considered in the design of a hydraulic system in which it is to be used, but also the characteristics of the system will affect the extent of the importance of the various characteristics of the fluid. In each individual system, as it employs a fluid, the characteristics of the fluid must be assessed with their immediate import and weighed in considering their effects on the system design requirements based upon the variables of system environment, function and basic design.
Standard

RECOMMENDED STANDARD FOR AEROSPACE FILTER ELEMENT FINE WIRE MESH
2011-02-11
HISTORICAL
AIR888
This AIR discusses the nature, method of manufacture and chemistry of fine wire meshes of the type used for filtration and similar applications, and how this information may be utilized in setting up a quality control program to insure reliability of meshes used for such applications.
Standard

Aerospace Hydraulic Fluids Physical Properties
2008-07-17
HISTORICAL
AIR1362B
This SAE Aerospace Information Report (AIR) presents data on hydraulic fluids which are of interest to detail designers of hydraulic systems and components for aerospace flight vehicles. The data pertain to fluids conforming to specifications MIL-H-5606, MIL-H-8446, MIL-PRF-27601, MIL-PRF-83282, MIL-H-53119, MIL-PRF-87257, Aerospace Standard 1241 Type IV, Classes 1 and 2, and Type V. The relative merits of hydraulic fluid properties in relation to the fluid formulation, aerospace hydraulic system design and the related materials compatibility are discussed in AIR81, Hydraulic Fluid Properties. This document is essentially a metric document with English units available in the data charts for convenience. There is a treatment of conversions between ISO and English units in AIR1657.
Standard

Sensitization and Corrosion in Stainless Steel Filters
2008-06-04
HISTORICAL
AIR844A
This document reviews briefly the subject of woven metal screens. Conditions that can promote damaging corrosion in stainless steel filter screens are discussed and recommendations are listed for minimizing corrosion damage. This is a general document only; for specific applications it is suggested that the reader refer to the technical literature, and selected references listed below.
Standard

Secondary Filters for Fluid System Reliability
2004-12-01
HISTORICAL
AIR4057A
This SAE Aerospace Information Report (AIR) discusses the design choices and engineering trade-offs available to the system designer in the efficient selection and application of Last-Chance filters in contrast to main or primary system filters.
Standard

Fine Wire Mesh for Filter Elements
2002-11-14
HISTORICAL
AIR888B
This SAE Aerospace Information Report (AIR) discusses the terminology, types, method of manufacture and chemistry of the fine wire meshes used for filtration of hydraulic, lubrication fuel systems, and similar applications. Information contained herein may be used for quality assurance testing to insure that a high performance filter grade wire mesh is acceptable for use in an aerospace application.
Standard

Aerospace - Dynamic Test Method for Determining the Relative Degree of Cleanliness of the Downstream Side of Filter Elements
2002-05-21
HISTORICAL
ARP599C
This SAE Aerospace Recommended Practice (ARP) describes a procedure for determining the insoluble contamination level of the downstream side of filter elements. Results of this procedure represent the particulate released from the tested filter element under the prevailing conditions of the test. The results may be used for comparative evaluation of the effectiveness of various cleaning methods or the cleanliness of elements after cleaning or as received from manufacturers.
Standard

Bubble-Point Test Method
2001-05-01
HISTORICAL
ARP901A
This test method describes a procedure for measuring the largest pore or hole in a filter or similar fluid-permeable porous structure. A standard referee test method for precise determination or resolution of disputes is specified. A simpler inspection test procedure for quality assurance “go-no-go” measurement is also given. Bubble-point testing physics, analysis of bubble-point test data, and correlation with other methods of pore size determination are separately discussed in the appendix.
Standard

Aerospace Hydraulic Fluids Physical Properties
1999-12-01
HISTORICAL
AIR1362A
This SAE Aerospace Information Report (AIR) presents data on hydraulic fluids which are of interest to detail designers of hydraulic systems and components for aerospace flight vehicles. The data pertain to fluids conforming to specifications MIL-H-5606, MIL-H-8446, MIL-PRF-27601, MIL-PRF-83282, MIL-H-53119, MIL-PRF-87257, Aerospace Standard 1241 Type IV, Classes 1 and 2, and Type V. The relative merits of hydraulic fluid properties in relation to the fluid formulation, aerospace hydraulic system design and the related materials compatibility are discussed in AIR81, Hydraulic Fluid Properties. This document is essentially a metric document with English units available in the data charts for convenience. There is a treatment of conversions between ISO and English units in AIR1657.
12Next >Last >>
X