Search Results

In this paper a design methodology for automotive heat exchangers has been applied which brings robustness into the design process and helps to optimize the design goals: as to maintain an optimal coolant temperature and to limit the vehicle underhood air temperature within a tolerable limit. The most influential design factors for the heat exchangers which affect the goals have been identified with that process. The paper summarizes the optimization steps necessary to meet the optimal functional goals for the vehicle as mentioned above. Taguchi's [1] Design for Six Sigma (DFSS) methods have been employed to conduct this analysis in a robust way.

As customer awareness of product sound grows, the need exists to ensure that product sound quality is maintained in the manufacturing process. To this end in-process controls that employ a variety of traditional acoustical and alternate sound quality metrics are utilized, usually partly or wholly housed in a test enclosure. Often times these test cells are required to attenuate the background noise in the manufacturing facility so that the device under test can be accurately assessed. While design guidelines exist the mere size and cost of such booths make an iterative build and test approach costly in terms of materials as well as engineering and testing time. In order to expedite the design process and minimize the number of confirmation prototypes, SEA can be utilized to predict the transmission loss based upon material selection and booth construction techniques.

Attenuation of noise from the rear of a vehicle was evaluated for different trunk insulation systems using a combination of poro-elastic material modeling and a full vehicle SEA model. The model considered the interaction between the trunk and the passenger cabin. The sound absorption coefficients and acoustic impedance for each of the material systems used in the trunk were measured and the poro-elastic Biot properties were calculated to define the acoustic treatments in the SEA model. Several levels of acoustical treatment for the trunk were studied ranging from a trunk with no decorative liner to a trunk with a liner and maximum acoustical treatment. The results show the contribution of the trunk material in reducing cabin noise for different levels of noise originating at the rear of the vehicle. These results demonstrate the value of combining poro-elastic material modeling and SEA models for selecting efficient material systems early in a vehicle design.

In an environment of tougher engineering constraints to deliver tomorrow's aerodynamic vehicles, evaluation of aerodynamics early in the design process using digital prototypes and simulation tools has become more crucial for meeting cost and performance targets. Engineering needs have increased the demands on simulation software to provide robust solutions under a range of operating conditions and with detailed geometry representation. In this paper the application of simulation tools to wheel design in on-road operating conditions is explored. Typically, wheel and wheel cover design is investigated using physical tests very late in the development process, and requires costly testing of many sets of wheels in an on-road testing environment (either coast-down testing or a moving-ground wind-tunnel).

A process to create a vehicle resistance curve based on airflow predictions using Computational Fluid Dynamics (CFD) simulation technique is presented. 1-dimensional engine cooling system simulation tool KULI is used to compute the coefficients of vehicle resistance curve. A full factorial Design of Experiment (DOE) established the relationship between the coefficients and the sum of absolute difference between KULI and CFD predictions. The NLPQL optimization routine is used to accurately predict the coefficients so that sum of absolute difference between KULI and CFD predictions is minimized.

There are many software tools in use today that are implementing the Biot, or complementary, method for the evaluation of foam and fiber materials. The justification of this process is to understand which mechanisms of the noise control material are contributing to the noise reduction and to optimize the material based on its acoustic properties. The disadvantage of this method is that it is quite complex and time consuming to test a material in order to extract the underlying properties that govern the acoustic performance. An alternative inverse method for material characterization based on simple impedance tube measurements has been developed lately. This paper recalls the physics and mathematics behind the method and concentrates on its validation.

A model of a tractor cab was built using Statistical Energy Analysis (SEA) best practices. In this paper, it is shown how this model was correlated using p/Q transfer functions measured in the lab with a volume velocity source. After correlation, the model was excited using acoustic loads measured during tractor operation. It was found that the data predicted by the model is in good agreement with the data measured inside the cabin during this test. It was concluded that SEA can be used as an engineering tool to predict the behavior under many different conditions and can be used to guide the development process.

The excitation of structural modes of vehicle roofs due to structure-borne excitations from the road and powertrain can generate boom and noise issues inside the passenger cabin. The use of elastomeric foams between the roof bows and roof panel can provide significant damping to the roof and reduce the vibration. If computer-aided engineering (CAE) can be used to predict the effect of elastomeric foams accurately on vibration and noise, then it would be possible to optimize the properties and placement of foam materials on the roof to attenuate vibration. The properties of the different foam materials were characterized in laboratory tests and then applied to a flat test panel and a vehicle body-in-white. This paper presents the results of an investigation into the testing and CAE analysis of the vibration and radiated sound power of flat steel panels and the roof from the BIW of an SUV with anti-flutter foam and Terophon® high damping foam (HDF) materials.

The sound quality of a prototype series hydraulic hybrid passenger vehicle powertrain was analyzed. Different sound quality metrics were evaluated to determine which one correlated best with the subjective assessment of sound quality, and a desired sound quality target was developed. Next, the effect of the design of the hydraulic powertrain components on sound quality was analyzed. Two extreme options were analyzed: “stiff” systems with a hard drive shaft or short fluid hoses, and “soft” systems with a soft drive shaft or long fluid hoses. Experimental results from these systems are presented in the paper. Finally, design recommendations were made to achieve the best sound quality of the hybrid hydraulic powertrain, and therefore maximum customer satisfaction.

CAE tools are increasingly important in the automotive design process. In part, CAE tools can be useful in reducing the number of physical prototypes required during a product development effort. CFD tools can assess and predict cylinder charge motion for proposed designs, thereby limiting the need for prototype work. Though detailed combustion simulation results could help guide product development, the time required for such simulations limits their usefulness in the context of a production program. However equally valuable information can be obtained from gas exchange analyses which require less computation time and are run only from Intake Valve opening (IVO) to spark timing. Chemical kinetics is not included in this type of analysis. Using this approach, large numbers of configurations can be evaluated in a short period of time. Every passing year automotive engineers are challenged to attain higher fuel economy targets.

With the advent of quieter powertrain and improved cabin acoustic sealing, there is an increased focus on noise generated in the HVAC unit and climate control ducting system. With improved insulation from exterior noise sources such as wind & road noise, HVAC noise is more perceptible by the occupants and is a key quality indicator for new generation vehicles. This has increased the use of simulations tools to predict HVAC noise during the virtual development phase of new vehicle programs. With packaging space being premium under the instrument panel, changes to address noise issues are expensive and often impractical. The current methodology includes the best practices in simulation accumulated from prior aero acoustics validation studies on fans, ducts, flaps and plenum volume discharge. The paper details the acoustic noise generation and propagation in the near field downstream of an automotive HVAC unit in conjunction with ducting system.

Porous materials have been applied increasingly for absorbing noise energy and improving the acoustic performance. Different models have been proposed to predict the performance of these materials, and much progress has been achieved. However, most of the foregoing researches have been conducted on a single layer of porous material. In real application, porous materials are usually combined with other kinds of materials to compose a multilayered noise control treatment. This paper investigates the acoustic performance of such treatments with a combination of porous and non-porous media. Results from numerical simulation are compared to experimental measurements. Transfer matrix method is adopted to simulate the insertion loss and absorption associated with three samples of a noise control treatment product, which has two porous layers bonded by an impervious screen.

The benefits of utilizing virtual engineering include not only shortened product development time and reduced reliance on expensive physical testing, but also the opportunities for greater standardization to support higher product quality. This paper describes a project for building a smart meshing template with a CAD/CAE link. The objective of the project is to optimize the utilization of CAD software and CAE preprocessing software capabilities. The deliverable of the project is a cylinder head mesh template which meets all the cylinder head durability simulation meshing requirements, and which links to CAD/CAE software. Special surface areas identified are built into the cylinder head CAD model design. By using one of the features in CAD software, all the special surfaces can be automatically updated throughout the design process.

The demand for seating comfort is growing - in cars as well as trucks and other commercial vehicles. This is expected as the seat is the largest surface area of the vehicle that is in contact with the occupant. While it is predominantly luxury cars that have been equipped with climate controlled seats, there is now a clear trend toward this feature becoming available in mid-range and compact cars. The main purpose of climate controlled seats is to create an agreeable microclimate that keeps the driver comfortable. It also reduces the “stickiness” feeling which is reported by perspiring occupants on leather-covered seats. As part of the seat design process, a physical test is performed to record and evaluate the life cycle and the performance at ambient and extreme temperatures for the climate controlled seats as well as their components. The test calls for occupied and unoccupied seats at several ambient temperatures.

Sound propagation through noise control treatment is governed by fluid, mechanical and geometric properties of the materials. The knowledge of material properties is important to improve the acoustical performance of the resulting noise control products. A method based on optimization together with genetic algorithm is used to estimate material properties of multi-layered treatments. Unlike previous inverse characterization approaches based on normal incidence performance metrics measured using standing wave impedance tubes, the current approach is based on random incidence performance metrics. Specially, the insertion loss ‘measured’ from two room transmission loss suite is utilized. To validate the applicability of the proposed method, numerically synthesized insertion loss computed from known material properties are used. In order to properly represent the ‘measured’ values, noise is added to the numerically synthesized insertion loss values.

Optimizing noise control treatments in the early design phase is crucial to meet new strict regulations for exterior vehicle noise. Contribution analysis of the different sources to the exterior acoustic performance plays an important role in prioritizing design changes. A method to predict Pass-by noise performance of a car, based on source-path-receiver approach, combining data coming from simulation and experimental campaigns, is presented along with its validation. With this method the effect of trim and sound package on exterior noise can be predicted and optimized.

The development of an effective Acoustic Vehicle Alert System (AVAS) is not solely about adhering to safety regulations; it also involves crafting an auditory experience that aligns with the expectations of vulnerable road users. To achieve this, a deep understanding of the acoustic transfer function is essential, as it defines the relationship between the sound emitter (the speaker inside the vehicle) and the receiver (the vulnerable road user). Maintaining the constancy of this acoustic transfer function is paramount, as it ensures that the sound emitted by the vehicle aligns with the intended safety cues and brand identity that is defined by the car manufacturer. In this research paper, three distinct methodologies for calculating the acoustic transfer function are presented: the classical Boundary Element method, the H-Matrix BEM accelerated method, and the Ray tracing method.

Noise reduction is generally accomplished by applying appropriate noise control treatments at strategic locations. Noise control treatments consisting of poroelastic materials in layers are extensively used in noise control products. Sound propagation through poroelastic materials is governed by macroscopic material and geometric properties. Thus, a knowledge of material properties is important to improve the acoustical performance of the resulting noise control products. Since the direct measurement of these properties is cumbersome, these have been usually estimated indirectly from easily measurable acoustic performance metrics such as normal incidence sound transmission and/or absorption coefficient, measured using readily available impedance tube. The existing inverse characterization approaches fulfilled the estimation by curve fitting measured and predicted acoustic models.