Search Results

Aircraft systems have a stringent requirement governed by the certifying authorities demanding that the system and components are qualified for all the applicable requirements. Conducting qualification tests on all the components in a system for all operational requirements, environmental loads, and the loads for uncertainties such as limit and ultimate cases would consume a significant time in the product design cycle. With improved computational power and with validated higher fidelity models, structural analysis is proving to be a way forward in reducing the product design cycle time. This paper discusses about the structural analysis driven qualification test definition aligning with modes of compliances defined by CS25 / FAR 25 with an objective to minimize and simplify the tests carried out as a step towards certification by analysis.

The main aim of operating the navigation database server from ground station (Web/cloud) is to operate a single navigation database server across all aircrafts and navigation database updates can be performed at one place. which will be effective and quick, thus no need to update the navigation database in each flight for every 28 days. UAM refers to a safe and efficient air transportation system that uses transformative new airborne technology, manned and unmanned, to move people and goods in a metropolitan area, operating the navigation data base server from ground station might be the first step towards including the FMS system in urban air mobility (UAM). the proposed system can run as standalone application and provides serveries to all aircrafts from single resource; thus, the system will provide services with low cost.

Pitot probes and Total Air Temperature (TAT) probes are critical to aircraft performance. They are also susceptible to becoming overwhelmed and produce erroneous outputs when flying in icing conditions, especially in high altitude ice crystal situations. When the probes are overwhelmed with ice crystals, it can have significant impacts to aircraft operations. Through design and process iterations, Collins Aerospace (also known as Rosemount Aerospace™), has developed new Appendix D compliant pitot and TAT probes that are much more capable in high ice crystal content icing environments which greatly reduce the adverse risks to the aircraft and engine systems that depend on these probes.

Multiphase CFD simulations of air and water play a critical role in aircraft icing analysis. Specifically for air data sensors mounted near the front of an aircraft, simulations that predict the concentration of water surrounding an aircraft fuselage are necessary for understanding their performance in icing conditions. Those simulations can aid in sensor design and placement, and are central for defining critical conditions to test during icing qualification campaigns. There are several methods available in CFD that solve a multiphase flow field. Two of the most common methods used are Lagrangian and Eulerian. While these methods are similar, important differences can be viewed in the results, specifically in how the water shadow zones are predicted. This paper compares a Lagrangian and Eulerian CFD method for solving a multiphase flow field, and assesses their performance for use for analyzing installation locations and critical icing conditions of air data probes.

For nearly a century, ice build-up on aircraft surfaces has presented a safety concern for the aviation industry. Pilot observations of visible moisture and temperature has been used a primary means to detect conditions conducive to ice accretion on aircraft critical surfaces. To help relieve flight crew workload and improve aircraft safety, various ice detection systems have been developed. Some ice detection systems have been successfully certified as the primary means of detecting ice, negating the need for the flight crew to actively monitor for icing conditions. To achieve certification as a Primary ice detection system requires detailed substantiation of ice detector performance over the full range of icing conditions and aircraft flight conditions. Some notable events in the aviation industry have highlighted certain areas of the icing envelope that require special attention.

The Collins Aerospace Optical Ice Detector is a short-range polarimetric cloud lidar designed to detect and discriminate among all types of icing conditions with the use of a single sensor. Recent flight tests of the Optical Ice Detector (OID) aboard a fully instrumented atmospheric research aircraft have allowed comparisons of measurements made by the OID with those of standard cloud research probes. The tests included some icing conditions appropriate to the most recent updates to the icing regulations. Cloud detection, discrimination of mixed phase, and quantification of cloud liquid water content for a cloud within the realm of Appendix C were all demonstrated. The duration of the tests (eight hours total) has allowed the compilation of data from the OID and cloud probes for a more comprehensive comparison. The OID measurements and those of the research probes agree favorably given the uncertainties inherent in these instruments.

In response to safety regulations regarding aircraft icing, Collins Aerospace has developed and tested a new generation of optical ice detectors (OID Lite) intended to discriminate among icing conditions described by Appendix C and Appendix O of 14 CFR Part 25 and Appendix D of Part 33. The OID Lite is a flush-mounted, short-range, polarimetric optical sensor that samples the airstream up to two meters beyond the skin of the aircraft. The intensity and polarization of the backscatter light correlate with bulk properties of the cloud, such as cloud density and phase. Drizzle-sized droplets, mixed within a small droplet cloud, appear as scintillation spikes in the lidar signal when it is processed pulse-by-pulse. Scintillation in the backscatter (in combination with the outside air temperature monitored by another probe) signals the presence of supercooled large droplets (SLD) within the cloud—a capability incorporated into the OID Lite to meet the requirements of Appendix O.

Evolving of aircraft design towards further electrification requires safe and fault-free operation of all the components. More electric aircraft are increasingly utilizing electro-mechanical actuators (EMA). EMAs are prone to jamming and subsequent failure due to large forces on the shaft. Large forces are generated due to the high reflected inertia of the electric machine rotor. To limit the force acting on the shaft, a torque limiting device is connected to the power train which can separate the rotating mass of the electric machine from the power train. In this paper, a concept of integration of torque limiter and the electric machine rotor is presented to reduce overall volume and mass. It is connected closely with the rotor, within the motor envelope. A commercially available torque limiter and an electric machine designed for actuator application are used to demonstrate the concept. While essential for safety, the torque limiter adds to the mass and size of the overall EMA.

In response to new safety regulations regarding aircraft icing, Collins Aerospace has developed and tested an Optical Ice Detector (OID) capable of discriminating among icing conditions appropriate to Appendix C and Appendix O of 14 CFR Part 25 and Appendix D of Part 33. The OID is a short-range, polarimetric lidar that samples the airstream up to ten meters beyond the skin of the aircraft. The intensity and extinction of the backscatter light correlate with bulk properties of the cloud, such as water content and phase. Backscatter scintillation (combined with the outside air temperature from another probe) signals the presence of supercooled large droplets (SLD) within the cloud-a capability incorporated into the OID to meet the requirements of Appendix O. Recent laboratory and flight tests of the Optical Ice Detector have confirmed the efficacy of the OID to discriminate among the various icing conditions.

The aerospace ecosystem is a complex system of systems comprising of many stakeholders in exchanging technical, design, development, certification, operational, and maintenance data across the different lifecycle stages of an aircraft from concept, engineering, manufacturing, operations, and maintenance to its disposal. Many standards have been developed to standardize and improve the effectiveness, efficiency, and security of the data transfer processes in the aerospace ecosystem. There are still challenges in data transfer due to the lack of standards in certain areas and lack of awareness and implementation of some standards. G-31 standards committee of SAE International has conducted a study on the available digital data standards in aircraft asset life cycle to understand the current and future landscapes of the needed digital data standards and identify gaps. This technical paper presents the study conducted by the G-31 technical committee.

The aircraft jet engine is one of the most complex multivariable systems with multiple inputs and multiple outputs. To attempt to optimize control functions or to address diagnostic problems, a detailed knowledge of all jet engine design parameters and performances is required. Although jet engines have been around for almost a century, there are only a few companies in the world presently designing and manufacturing them; as such these companies possess detailed knowledge of all relevant design characteristics and performance parameters. In the event where jet engine technical details are unknown, or only a few of them are known from manufacturer’s catalogues, the challenge becomes how to calculate and extrapolate critical performance parameters based on only fuel flow, jet exhaust temperature and total thrust.

The growth in global economies has led to a world that has become much more mobile in the last few decades. The number of enplanements has increased and is expected to continue to do so at an annual average rate of 1.8% through 2039 [1]. Prior to the COVID-19 pandemic, the number of aircraft in service was expected to increase annually to meet the travel demand. Next-generation, more-complex aircraft were scheduled to replace the older aircraft at a pace that still allowed sufficient capacity to meet the increasing demand. The events of 2020 have driven the industry to accelerate retirement of older aircraft while deferring the introduction of new aircraft. While the length of the industry recovery period cannot be predicted, most analysts believe that demand for travel will return once a vaccine is widely available.

Certification standards for high-assurance systems include objectives for demonstrating compliance of process artifacts such as requirements and code with style guidelines and other standards. With the emergence of model-based development, similar objectives have been specified that apply to models. Demonstration of compliance is often achieved by employing a static analysis linter tool. This paper describes Resolint, an open-source, lightweight linter tool for checking compliance of Architecture Analysis and Design Language (AADL) models with modeling guidelines. AADL enables engineers to describe the key elements of distributed, real-time, embedded system architectures with a sufficiently rigorous semantics. In addition, AADL provides an annex mechanism for extending the base language, enabling new kinds of analyses and tool support. Resolint uses the AADL annex capability to provide a language for specifying style guide rule sets.

Unmanned Aircraft Systems (UAS) have been growing over the past few years and will continue to grow at a faster pace in future. UAS faces many challenges in certification, airspace management, operations, supply chain, and maintenance. Blockchain, defined as a distributed ledger technology for the enterprise that features immutability, traceability, automation, data privacy, and security, can help address some of these challenges. However, blockchain also has certain challenges and is still evolving. Hence it is essential to study on how blockchain can help UAS. G-31 technical committee of SAE International responsible for electronic transactions for aerospace has published AIR 7356 [1] entitled Opportunities, Challenges and Requirements for use of Blockchain in Unmanned Aircraft Systems Operating below 400ft above ground level for Commercial Use. This paper is a teaser for AIR 7356 [1] document.

The number of Unmanned Aircraft Systems (UAS) has been growing over the past few years and will continue to grow at a faster pace in the near future. UAS faces many challenges in certification, airspace management, operations, supply chain, and maintenance. Blockchain, defined as a distributed ledger technology for the enterprise that features immutability, traceability, automation, data privacy, and security, can help address some of these challenges. However, blockchain also has certain drawbacks and, additionally, it is still not fully mature. Hence it is essential to study how blockchain can help UAS. This Aerospace Information Report (AIR) presents the current opportunities, challenges of UAS operating at or below 400 ft Above Ground Level (AGL) altitude for commercial use and how blockchain can help meet these challenges. It also provides requirements for developing a blockchain solution for UAS along with the need for the standardization of blockchain enabled processes.

The aerospace industry is noticing significant shift towards More Electric Aircraft (MEA). The advancement of electrical technology the systems are being transformed towards electric compared to the conventional pneumatic or hydraulic systems. This has led to an increased demand in electrical power from 150 Kilo Watts in the conventional airplane to 1 Mega Watts in More Electric Aircraft. More electric systems, call for increased electrical wiring harness to connect various systems in the aircraft. These harnesses consist of power and data cables. Wireless communication technology is being matured for data communication, leading to reduction of wire harness for data. As of now, the length of wires in large commercial aircraft is over 100miles and it may not be surprising if the electrification of aircraft drive this too much longer.

The aircraft lifecycle involves thousands of transactions and an enormous amount of data being exchanged across the stakeholders in the aircraft ecosystem. This data pertains to various aircraft life cycle stages such as design, manufacturing, certification, operations, maintenance, and disposal of the aircraft. All participants in the aerospace ecosystem want to leverage the data to deliver insight and add value to their customers through existing and new services while protecting their own intellectual property. The exchange of data between stakeholders in the ecosystem is involved and growing exponentially. This necessitates the need for standards on data interoperability to support efficient maintenance, logistics, operations, and design improvements for both commercial and military aircraft ecosystems. A digital thread defines an approach and a system which connects the data flows and represents a holistic view of an asset data across its lifecycle.

Innovative carbon nanotube (CNT) electrothermal heating technology for ice protection systems is one of the alternatives under development that shall contribute to more efficient and sustainable aircraft. CNT heater technology allows for more rapid heat up rates over legacy metallic electrothermal heaters that utilize resistance wires or metallic foils. This more rapid heat up rate can lead to more energy efficient electrothermal ice protection system designs and is being studied to determine how much the rapid heat up properties of CNT can lead to a minimization of residual ice build-up aft of the heated area. Due to the inherent redundancy of CNT material used, leads to a very robust and damage tolerant heating element. To mature this technology to prepare to implement CNT on an in-service aircraft platform, a multi-staged flight testing effort to prove out the technology on an actual aircraft and in a relevant environment is mandatory.

Avionics systems are currently undergoing a transition from single core processor architectures to multi-core processor architectures. This transition enables significant advantages in reduction in size, weight, power (SWaP) and cost. However, avionics hardware and software certification policies and guidance are evolving as research and experience is gained with multi-core processor architectures. The unique challenges of using multi-core processors in certified avionics will be discussed. The requirements for a virtualization platform supporting multiple real-time operating system (RTOS) partitions on a multi-core processor used in safety-critical avionics systems are defined, including the ability to support multiple design assurance levels (DAL) on multiple cores, fault isolation and containment, static configuration as per ARINC 653, role-based development as per DO-297, and robust partitioning to reduce cost of incremental certification.

Effective contrail management while ensuring operational and economic efficiencies for flight services is essential for providing services with minimal adverse environmental impact. The paper explores various aspects of contrail management applicable to different platforms such as Unmanned vehicles, Commercial airliners and Business & regional jets. The aspects unique to each platform such as flight levels of operation, fuel types, flight endurance and radius of operation have been analyzed. Expanse of 5G network is resulting in increased flight activity at flight levels not envisaged hitherto. The paper also dwells on the ramifications of the increased proliferation of different platforms at newer flight levels from the perspective of contrail management.