Search Results

A vehicle test program was conducted at the Environmental Protection Agency's National Vehicle and Fuel Emissions Laboratory to provide data on the relationship between fuel properties and exhaust emissions of nonmethane hydrocarbons (NMHC), NOx, and CO. This study, Phase III, is the third in a series of programs sponsored by the Agency. This Phase III program consisted of 19 light-duty high and normal emitting vehicles tested on 10 different fuels. The properties for each test fuel were specified in order to examine seven separate fuel effects on exhaust emissions; interactions between olefins and volatility, interactions between olefins and sulfur, very high and very low levels of sulfur, low levels of aromatics, low volatility, and low levels of olefins. For all of the fuels tested, the normal emitter vehicles produced greater percentage reductions than the high emitters. The data in this work showed lower NMHC emission reduction than predicted by the complex model.

The Environmental Protection Agency (EPA) recently tested a clean diesel fuel developed by Dion & Sons for use in stationary sources. This fuel is known as Amber 363 in Southern California and its technology is licensed outside of the Southern California area to Shell Oil Products Company for use as a stationary source fuel. The fuel, hereafter referred to as “Shell LOW NOX Fuel,” was tested in a 1990 model year heavy heavy-duty diesel engine using both the transient Federal Test Procedure (FTP) for on-highway heavy-duty engines, the steady-state FTP for nonroad heavy-duty engines, and the steady-state generator set test cycle. For each test, EPA measured hydrocarbon (HC), carbon monoxide (CO), nitrogen oxides (NOx) and particulate matter (PM) emissions. Transient testing showed that the Shell LOW NOX Fuel lowers NOx, HC and PM emissions with no statistically significant change in CO emissions for both cold-starts and hot-starts when compared to diesel certification test fuel.