Search Results

The purpose of this study was to evaluate automatic transmissions in a forestry context by comparing their performance with that of standard manual transmissions, and assessing the possibility of improving fuel efficiency by adapting the engine and automatic transmission performances to the vehicle's load. Long-haul test results showed that during the test day, the degradation in driver performance with the manual transmission truck translated into a 2.9% relative increase in fuel consumption when compared with the automatic transmission truck. The fleet data assessment indicated no obvious difference in fuel consumption between the performance of automatic transmissions and manual transmissions. One system for adapting engine performance to vehicle load uses an onboard weigh scale to determine the load status of the vehicle.

Air resistance, after gross vehicle weight, is the largest factor responsible for vehicle energy loss and has an important influence on fuel consumption. The magnitude of aerodynamic drag is affected by the vehicle's shape, frontal area, and travel speed. This study aimed to evaluate several aerodynamic drag reduction measures applicable to class 8 tractor-trailer combinations. The tested aerodynamic devices included trailer aft body rear deflectors (boat tails), trailer skirts, gap deflectors, fuel tank fairings and truck rear-axle fenders. It also assessed the aerodynamic influence of opened doors on an empty wood chip van trailer on the fuel consumption of the tractor-trailer combination. The tests were conducted according to SAE J1321 Joint TMC/SAE Fuel Consumption Test Procedure - Type II.

This study aimed to evaluate several rolling resistance reduction measures applicable to class 8 tractor-trailer combinations. Two methods have been employed: fuel consumption tests according to the SAE J1321 Joint TMC/SAE Fuel Consumption Test Procedure - Type II, and long-term operational observations using control and test vehicles monitored throughout baseline and test periods. One way to reduce the rolling resistance is to use wide-base tires: two different Type II fuel consumption tests revealed a more than 9 % improvement in fuel economy for a tractor-trailer combination equipped with wide-base tires. Long-term operational observation assessed the use of single wide-base tires on two 8-axle B-train tractor-trailer combinations. The results showed an average 5.11% fuel improvement and an average 4.37% energy intensity improvement. Other tests compared single-wide base tires with different tread patterns and tire compounds.

The objective of the project was to compare the fuel consumption of a prototype hybrid electric CNG truck with that of two trucks: a CNG truck and a diesel truck for the similar market and operating conditions. The tests were conducted on a test route representative of the conditions encountered by these vehicles in normal driving operations. The test route length was 276 km with a maximum altitude difference of 374 m. The test route had four sections, including a hilly section with a length of 88 km. The result of the comparison between the two CNG trucks was expressed as fuel savings of CNG in percentage. The fuel consumption of the diesel truck was accurately measured using the gravimetric method. The hybrid electric CNG truck showed average fuel savings of 3.6% and demonstrated up to 7.7% in savings for the entire trip compared to the CNG truck.