Search Results

This study presents a practical theoretical method to judge the aerodynamic response of buses in the early design stage based on both aerodynamic and design parameters. A constant longitudinal velocity 2-DOF vehicle lateral dynamics model is used to investigate the lateral response of a bus under nine different wind gusts excitations. An appropriate 3-D CFD simulation model of the bus shape results is integrated with carefully chosen design parameters data of a real bus chassis and body to obtain vehicle lateral dynamic response to the prescribed excitations. Vehicle model validity is carried out then, the 2-DOF vehicle lateral dynamics model has been executed in MATLAB Simulink environment with the selected data. Simulation represents the vehicle in a straight ahead path then entered a gusting wind section of the track with a fixed steering wheel. Vehicle response includes lateral deviation (LD), lateral acceleration (LA), yaw angle (YA) and yaw rate (YR).

The minimum support stiffness that achieves the maximum modal frequencies or critical speed is very important in the design of mechanical systems. The optimal values of the intermediate support stiffness and geometrical parameters of uniform and stepped Timoshenko beams composed of single or two materials are studied in order to maximize the modal frequency and minimize the intermediate support stiffness. Dynamic stiffness matrix (DSM) method and multi-objective particle swarm optimization (MOPSO) algorithm are used together to evaluate new optimal parameters. For single material, the results show that for uniform thick beams, the optimal maximum fundamental frequency and minimum intermediate support stiffness are lower than those of Bernoulli-Euler beams. In addition, the optimal design for stepped beams made of two metallic materials is investigated. For three different metallic combinations, gain factors of 1.561 to 2.745 are obtained for a beam without intermediate support.

Vehicle Handling performance depends on many parameters. One of the most important parameters is the dynamic behavior of the steering system. However, steering system had been enhanced thoroughly over the past decade where Active Front Steering (AFS) is now present and other system as Active Independent Front Steering (AIFS) is currently in the research phase. Actually, AFS system adopt the front wheels’ angles base on the actual input steering angle from the driver according to vehicle handling dynamics performance. While, the AIFS controls the angle of each front wheel individually to avoid reaching the saturation limits of any of the front wheels’ adhesion. In this paper modeling and analysis of an AIFS is presented with Tire Work Load (TWL) based controller. Magic Formula tire model is implemented to represent the tire in lateral slip condition.

The dynamics of vehicles became one of the most important aspects for current developments of electronically controlled steering, suspension and traction/braking systems. However, most of the published research on vehicle maneuverability doesn't take into account the effect of the dynamic tire load and its variation on uneven roads. Clearly, it was stated that using a suitable active suspension system could reduce this dynamic tire load. This dynamic tire load is playing a vital role as it is the major link between the vertical and lateral forces exerted on the road, which affects the lateral dynamics of the vehicle. In this paper, a practical hydro-pneumatic limited bandwidth active suspension system with and without wheelbase preview control is used to study its influence on the vehicle stability in lateral direction. The model is a longitudinal half car with four degrees of freedom.

Plug-in hybrid vehicles connect to the power grid while parked so they can operate on electricity from the grid as well as on petroleum-based fuel. This distinguishes them in a fundamental way from the plug-less hybrid vehicles currently produced or planned by auto-marker which rely 100% on the petroleum-based fuel. A plug-in hybrid can reduce emissions. However, the aim of this paper is to investigate experimentally the aerodynamic noise performance of a plug-in hybrid vehicle induction motor with the view of evaluation. For this reason, a special test rig was developed to simulate the motor aerodynamic noise source. The results indicate that significant information can be obtained for this source. This can be an effective way to control this generated noise and consequently reduce the vehicle interior and exterior noises and look promising.

In this work the effects of vehicle vertical vibrations on the tires/road cornering forces, and then consequently on vehicle lateral dynamics are studied. This is achieved through a ride model and a handling model linked together by a non-linear tire model. The ride model is a half vehicle with four degrees of freedom (bounce and pitch motions for vehicle body and two bounce motions for the two axles). The front and rear suspension are a hydro-pneumatic slow-active systems with 6 Hz cut-off frequency designed based on linear optimal control theory. Vehicle lateral dynamics is modeled as two degrees (yaw and lateral motions) incorporating a driver model. An optimal rear wheel steering control in addition to the front steering is considered in the vehicle model to represent a Four Wheel Steering (4WS) system. The tire non-linearity is represented by the Magic Formula tire model.

The number of speed humps (sleeping policemen) has seen a global increase in the last decade. This paper addresses the geometric requirements of these humps using Genetic Algorithms optimization techniques to control the speed, stability, and ride feel of the traversing vehicles. The interaction between road hump profile and the modeled vehicles (passenger and a two-axle truck) are studied with a dynamic model. The shape of the proposed profile is described by numbers of amplitudes of harmonic functions. The extreme acceleration of the drivers’ seats of the vehicles traversing the hump is set as multiobjective function for the optimization process, taking into consideration the road-holding ability represented by the tire lift-off speed. The results show that hump geometry can be improved while fulfilling the requirements of speed control and vehicle dynamic responses.

The early detection of incipient failure in a mechanical system is of great practical importance as it permits scheduled inspections without costly shutdowns and indicates the urgency and locations for repair before a system incurs catastrophic failure. However, in this work a new technique for processing vibration data to quantify the level of damage, cracks only, in a gear system. The technique consists of a nonlinear numerical optimization. The optimization uses a dynamic model of the gear mesh used in vehicle gearbox and forms an estimate of both time-varying and frequency-varying mesh stiffness that best corresponds to the given set of vibration data. The procedure developed in this study can be applied as a part of either an onboard machine health monitoring system or a health diagnostic system used in the regular maintenance.

Squeal from brakes is a problem in the automotive industry and large efforts are made to understand the squeal tendencies. The approach taken is mainly to change the design of the caliper, fine-tune the brake pad material and finally to trim the introducing shims on the backside of the pads. Despite these efforts still no general solutions exist. To advance the situation, a deeper understanding of the actual source of excitation of the sound in the friction interface is needed. However, in the present investigation the surfaces modifications of brake disc and pad have been tested with respect to the understanding properties. The surfaces modifications are slotted pad material and coated disc. All tests have been made in a brake test stand consisting of a complete front wheel corner of a vehicle. The changes have resulted in a significant understand of the generated noise.

This paper is concerned with the analysis of the performance of actively suspended vehicles when the effects of the aerodynamics are considered. The investigation is wholly theoretical and treats a half vehicle model, active suspension, through simulation of running at different speeds on a random-profile road. Using classical control laws, which do not account for aerodynamic effects, it is shown that starting from a vehicle speed of 35 m/s, ride comfort and road holding parameters significantly deteriorate. A method is introduced to modify the control strategy so that these effects can be taken into consideration. Various forms of control laws are presented, and conclusions are drawn to specify the benefits that could be achieved from this modified control strategy.

A full vehicle of a preview control semi-active suspension system based on an interval type-2 fuzzy controller design using a magnetorheological (MR) damper to improve ride comfort is investigated in this paper. It is integrated with the force distribution system to obtain the optimal rate of road adhesion during braking and handling. The nonlinear suspension model is derived by considering vertical, pitch, and roll motions. The preview interval type-2 fuzzy technique is designed as a system controller, and it is attached with a Signum function method as a damper controller to turn on the voltage for the MR damper. This voltage is adjusted for each wheel based on the external excitation generated by road roughness in order to enhance ride comfort. To describe the effectiveness and adaptable responses of the preview controlled semi-active system, the performance is compared with both the passive and MR passive suspension systems during time and frequency domains.

A hybrid search optimization is presented in order to optimize hybrid laminated fibrous composite E-springs for vehicle suspension systems. This optimization is conducted with both of the geometrical configuration and laminate structure of the E-spring. A genetic algorithm along with a hill-climbing random-walk approach are used through a developed NURBS-based technique in order to conduct this optimization. A mathematical-modeling-based mid-ware technology is introduced in order to fully automate the optimization process through linking the run engines of mathematical modeling and finite element analysis from within the mathematical modeling engine. A hybrid approach of the inter-laminar shear stress and Tsai-Wu criteria is first implemented in order to identify failure indices of the resulting optimum shape and laminate structure.

Proportional integral derivative (PID) control method is an effective, easy in implementation and famous control technique applied in several engineering systems. Also, Genetic Algorithm (GA) is a suitable approach for optimum searching problems in science, industrial and engineering applications. This paper presents the usage of GA for determining the optimal PID controller gains and their implementation in the active quarter-vehicle suspension system to achieve good ride comfort and vehicle stability levels. The GA is applied to solve a combined multi-objective (CMO) problem to tune PID controller gains of vehicle active suspension system for the first time. The active vehicle suspension system is modeled mathematically as a two degree-of-freedom mechanical system and simulated using Matlab/Simulink software.

Integral Control strategy for vehicle chassis systems had been of great interest for vehicle designers in the last decade. This paper represents the interaction of longitudinal control and lateral control. In other words the traction control system and handling control system. Definitely, tire properties are playing a vital role in such interaction as it is responsible for the generated forces in both directions. A seven degrees of freedom half vehicle model is derived and used to investigate this interaction. The vehicle body is represented as a rigid body with three degrees of freedom, lateral and longitudinal, and yaw motions. The other four degrees are the two rotation motion of the front wheel and the rear wheel. This two motions for each wheel are spin motion and the steering motion. The traction controller is designed to modulate engine torque through adjusting the throttle angle of the engine upon utilized adhesion condition at the driving road wheels.

A non-linear mathematical model of a semi-active (2DOF) vehicle suspension using a magnetorheological (MR) damper with information concerning the road profile ahead of the vehicle is proposed in this paper. The semi-active vibration control system using an MR damper consists of two nested controllers: a system controller and a damper controller. The fuzzy logic technique is used to design the system controller based on both the dynamic responses of the suspension and the Padé approximation algorithm method of a preview control to evaluate the desired damping force. In addition, look-ahead preview of the excitations resulting from road irregularities is used to quickly mitigate the effect of the control system time delay on the damper response.

This study deals with the mitigation of the vibration of the structure using a compound mass liquid column damper (MLCD). To study the damping efficiency of the MLCD, the mathematical model of the single degree of freedom structure integrated with MLCD including the damping due to the moving mass in the horizontal portion of the damper is derived. The equivalent-damping factor of the MLCD is determined by simulating the interaction between the moving mass and the liquid using the fluid-structure interaction (FSI) technique. A 3D FSI model is solved numerically using the ANSYS Workbench-CFX package. The global search optimization algorithm is applied to find the optimum tuning frequency and the optimum mass diameter ratio over a wide range of mass ratio and excitation amplitude. The optimization issue is solved with considering the limits of the maximum displacement of the liquid and the mass.

Extensive studies of off-road non-pneumatic tires (NPTs) were conducted for light and heavy equipment due to their advantages over conventional pneumatic tires in terms of low rolling resistance, thus no need for air pressure maintenance. Finite element (FE) simulations of NPT contact pressure, contact shear stress, vertical stiffness, von mises stress, and rolling resistance were performed using ABAQUS software in a series of vertical loads to simulate tire models of three different spokes geometries on unpaved soil to verify NPT performance under different conditions. The spokes geometries were hexagonal (honeycomb) spoke, hexagonal re-entrant (Lattice) spoke and spoke with curvature called spoke pairs. It was found that the rolling resistance of the honeycomb structure has the lowest value, while the contact shear stress and contact pressure were the highest.

Proportional-integral-derivative (PID) controller is effective, popular and cost effective for a lot of scientific and engineering applications. In this paper, PID and fuzzy-self-tuning PID (FSTPID) controllers are applied to improve the performance of an active seat suspension system to enhance the pregnant woman comfort. The equations of motion of thirteen-degrees-of-freedom (13-DOF) active seat suspension system incorporating pregnant woman body model are derived and simulated. PID gains are tuned and estimated using genetic algorithm (GA) to formulate GA PID controller. In FSTPID, fuzzy logic technique is used to tune PID controller gains by selecting appropriate fuzzy rules using Matlab/Simulink software. Both controlled active seat suspension systems are compared with a passive seat suspension. Suspension performance is evaluated under bump and random road excitations in order to verify the success of the proposed controllers.

It is well known that the excessive levels of vibration in heavy vehicles negatively affect driver comfortability, cargo safety and road condition. The current challenge in the field of suspension design for heavy vehicles is to optimize the suspension dynamic parameters to improve such requirements. Almost all of the previous work in this field is based on applying the mathematical optimization considering active or passive suspension systems to obtain the optimal dynamic parameters. In this work a new passive suspension systems for heavy trucks is suggested and compared with the conventional passive suspension systems. The new systems rely on transferring the vertical motion, (vibration), into horizontal motion through a bell-crank mechanism to be taken by a horizontal passive suspension system. The system dynamic parameters like body acceleration, suspension travel and dynamic tire load are calculated assuming random excitation due to road irregularities.

This paper introduces an optimum design for a feedback controller of a fully active vehicle suspension system using the combined multi-objective particle swarm optimization (CMOPSO) in order to minimize the actuator power consumption while enhancing the ride comfort. The proposed CMOPSO algorithm aims to minimize both the vertical body acceleration and the actuator power consumption by searching about the optimum feedback controller gains. A mathematical model and the equations of motion of the quarter-car active suspension system are considered and simulated using Matlab/Simulink software. The proposed active suspension is compared with both active suspension system controlled using the linear quadratic regulator (LQR) and the passive suspension systems. Suspension performance is evaluated in time and frequency domains to verify the success of the proposed control technique.