Search Results

Eight kinds of the spot-welded test specimens were studied to obtain the basic fatigue data on steel sheets for car bodies. Analytical methods such as the strain amplitude at outside and inside plates close to the nugget, the maximum nominal stress and Kθmax criteria of fracture mechanics were used. The authors propose that the ratio of strains at two points around the nugget can provide evaluation of the bending load and estimation of the fatigue strength.

This paper describe the metal-to-ceramic joining method which is important for building ceramic adiabatic engine and deals with the potential of pistons for use for adiabatic ceramic engine. Although various ceramic-to-metal joining methods have been developed, the chemical bonding method such as brazing and diffusion bonding is not only inferior in complex joining process and heat resistance, but also incapable of attaining the bonding strength of 196Mpa required of engineering ceramics. The ceramic-to-metal bonding attained generally by mechanical method such as staking results in the failure of ceramic bonding face due to a strong shearing force accompanied by the plastic deformation of metal. Therefore, the reduction of the shearing force between the ceramic and metal materials and the improvement of plasticity of the metal are necessary.

Two working groups in the JSAE Committee of Fatigue–Reliability Section1 are currently researching the issue of fatigue life by both experimental and the CAE approach. Information regarding frequent critical problems on arc–welded structures were sought from auto–manufacturers, vehicle component suppliers, and material suppliers. The method for anti–fatigue design on arc–welded structures was established not only by a database created by physical test results in accordance with the collected information but also with design procedure taking Fracture–Mechanics into consideration. This method will be applied to vehicle development as one of the virtual laboratories in the digital prototype phase. In this paper, both the database from bench–test results on arc welded structures and FEA algorithm unique to JSAE are proposed some of the analysis results associated with the latter proposal are also reported.