Search Results

The rotary engine provides high power density compared to piston engine, but one of its downside is higher oil consumption. In order to better understand oil transport, a laser induced fluorescence technique is used to visualize oil motion on the side of the rotor during engine operation. Oil transport from both metered oil and internal oil is observed. Starting from inside, oil accumulates in the rotor land during inward motion of the rotor created by its eccentric motion. Oil seals are then scraping the oil outward due to seal-housing clearance asymmetry between inward and outward motion. Cut-off seal does not provide an additional barrier to internal oil consumption. Internal oil then mixes with metered oil brought to the side of the rotor by gas leakage. Oil is finally pushed outward by centrifugal force, passes the side seals, and is thrown off in the combustion chamber.

The fuel energy consumption of subsonic air transportation is examined. The focus is on identification and quantification of fundamental engineering design tradeoffs which drive the design of subsonic tube and wing transport aircraft. The sensitivities of energy efficiency to recent and forecast technology developments are also examined.

Vehicle weight reduction, reduced costs and improved safety performance are the main driving forces behind material selection for automotive applications. These goals are conflicting in nature and solutions will be realized by innovative design, advanced material processing and advanced materials. Advanced high strength steels are engineered materials that provide a remarkable combination of formability, strength, ductility, durability, strain-rate sensitivity and strain hardening characteristics essential to meeting the goals of automotive design. These characteristics act as enablers to cost- and mass-effective solutions. The ULSAB-AVC program demonstrates a solution to these conflicting goals and the advantages that are possible with the utilization of the advance high strength steels and provides a prediction of the material content of future body structures.

The established method of clearing a misted car windshield or of maintaining a clear view under misting conditions is through the application of an air supply via jet outlets in the instrument panel. The ability of such arrangements to perform adequately is a function of the prevailing environmental conditions, the vehicle speed, the condition of the demist air source and the geometry and arrangement of the jet outlets. This paper presents experimental data obtained in a purpose built environmental chamber designed to accommodate simple rectangular jets impinging on a misted glass surface. The facility consists of three conditioned air sources applied to a test chamber designed to represent the external, internal and demist air flows. Mist conditions on the glass surface are determined using a novel technique employing a CCD camera acquiring grey scale images which are digitally analysed to generate mist detection, grading and clearing contour data.

Pressures to increase the recyclable and recycled content of passenger vehicles are accelerating. In Europe, there is interest in eliminating halogenated polymers. Globally, more and more concern is focused on materials and methods that are ecologically friendly. Automakers and their suppliers are being encouraged to design and assemble components in new ways to facilitate separation, identification, and resource recovery at the end of the vehicle’s useful life - something that is not only good for the environment, but also the bottom line. One area of the vehicle that has proved challenging for applying such design for disassembly and recycling (DFD/R) principles has been the interior, owing to the sheer number of materials used there, and the great number of laminate structures that make disassembly nearly impossible. A good example is a door panel inner, which typically consists of a rigid plastic substrate, a foam pad, and a vinyl, leather, or cloth covering.

Damage to painted automotive plastics induced by Hertzian contact stresses continues to plague the material engineer involved in the design and selection of fascias, bumpers, body-side moldings, and the like. Studies conducted to determine the root cause of such failures have focused on the effects of paint and the role of friction in the compressive, tensile and shear failure of painted thermoplastic olefins (TPOs). The study described herein probes the effects of paint type on the compressive, tensile and shear damage resistance of painted TPO substrates. Coating variations, e.g., adhesion promoter and topcoat type, and their effect on damage type and damage sensitivity will be described. The apparatus utilized to impart the damage, SLIDO, and the variables studied affecting the damage, e.g., acceleration, velocity, temperature, and loading pressure, are also discussed.

Significant interest in high intensity discharge headlamps (HID) has been developing in the past few years. It evolved as a safety device in the high-end luxury automobile segments, and is now showing demand for applications in other vehicle lines as well. However, affordability of these systems has been a continuous problem for all vehicle lines. A headlamp system that consists of: a remotely located light collector integrated to an HID source and ballast, a pair of light cables and distribution optics at the output of the light cables is being presented as a low cost alternative to HID headlamps. It also offers significant reductions in vehicle power consumption and radically new styling options. Five different concepts for light distribution optics will be discussed along with their performance compared to conventional HID and halogen headlamps.

Reliable means for on-board detection of particulate filter failures or malfunctions are needed to meet diagnostics (OBD) requirements. Detecting these failures, which result in tailpipe particulate matter (PM) emissions exceeding the OBD limit, over all operating conditions is challenging. Current approaches employ differential pressure sensors and downstream PM sensors, in combination with particulate filter and engine-out soot models. These conventional monitors typically operate over narrowly-defined time windows and do not provide a direct measure of the filter’s state of health. In contrast, radio frequency (RF) sensors, which transmit a wireless signal through the filter substrate provide a direct means for interrogating the condition of the filter itself.