Search Results

To reduce the friction loss, the size of compression height and the weight of piston in the automobile gasoline engines, two-ring-pistons instead of usually used three-ring-pistons have been developed at many manufacturers. In many designs of piston ring arrengement, up to now, the second ring has been used for oil control not for gas sealing. And the second ring loses the sealing effect at a high speed by the ring movement in the groove. Therefore, it is expected that the trouble caused by an increase of blow-by is not large. However, an increase in thermal load caused by a decrease of the piston cooling passage and also an increase of the lubricating oil consumption are considered to be crucial problems, especially in case of high output engines. With respect to these problems, some improvement are indicated on the basis of the experiments.

Measurement of piston frictional forces during engine operation is valuable for improved fuel economy engine design. The measurement, however, is not easy work because the frictional forces are small compared with the gas and inertia forces. Several years ago, at the Musashi Institute of Technology, frictional forces were measured with a movable bore with pressure balancing. Recently, the pressure balancing devices have been improved and adapted for small engines. The piston frictional forces in a small diesel engine and a gasoline engine have been measured with the new device. The characteristics of the friction forces and the comparison between engine sizes, gasoline and diesel engines have been clarified and the effect of multi-grade oil and friction modifiers have been tested.