Search Results

The four-microphone standing wave tube system has proven useful for measuring the absorption and transmission loss of various fibrous and non-fibrous absorbers. The system is fast, repeatable, accurate and compact. This paper discusses the advantages of the four-microphone system for measuring the transmission loss in lateral-flow absorber systems. The original four-microphone round impedance tube system and the migration to a four-microphone square tube system are discussed. The four-microphone square tube system allows effective study of filled and partially filled cavities.

There has always been, from the very first UAV, a need for providing cost-effective methods of deploying unmanned aircraft systems at high altitudes. Missions for UAVs at high altitudes are used to conduct atmospheric research, perform global mapping missions, collect remote sensing data, and establish long range communications networks. The team of Gevers Aircraft, Technology Management Group, and Purdue University have designed an innovative balloon launched UAV for these near space applications. A UAV (Payload Return Vehicle) with a nested morphing wing was designed in order to meet the challenges of high altitude flight, and long range and endurance without the need for descent rate control with rockets or a feathering mode.

A technique has been developed for producing Light Fibers with Precision Lighting Elements, which emit side light in carefully controlled patterns for exterior lighting applications. Target specifications can now be satisfied with light delivered from a very small, robust package. Conventional lenses and reflectors are not required. Three exterior applications have been targeted: the Center High Mounted Stop Lamp (CHMSL), a Side Marker, and an Emergency Flasher. An optical model of each application has been built, for which basic input parameters are target distribution, fiber diameter, and fiber length. Fiber cores are manufactured with the desired optical elements; cladding and a reflective coating over the notches complete the Precision Lighting Element. Measured intensity distributions from prototypes meet the modeled performance expectations.

The damping effect that is observed when a fibrous acoustical treatment is applied to a thin metal panel typical of automotive structures has been modeled by using three independent techniques. In the first two methods the fibrous treatment was modeled by using the limp frame formulation proposed by Bolton et al., while the third method makes use of a general poro-elastic model based on the Biot theory. All three methods have been found to provide consistent predictions that are in excellent agreement with one another. An examination of the numerical results shows that the structural damping effect results primarily from the suppression of the nearfield acoustical motion within the fibrous treatment, that motion being closely coupled with the vibration of the base panel. The observed damping effect is similar in magnitude to that provided by constrained layer dampers having the same mass per unit area as the fibrous layer.

Wideband Acoustical Holography (WBH), which is a monopole-based, equivalent source procedure (J. Hald, “Wideband Acoustical Holography,” INTER-NOISE 2014), has proven to offer accurate noise source visualization results in experiments with a simple noise source: e.g., a loudspeaker (T. Shi, Y. Liu, J.S. Bolton, “The Use of Wideband Holography for Noise Source Visualization”, NOISE-CON 2016). From a previous study, it was found that the advantage of this procedure is the ability to optimize the solution in the case of an under-determined system: i.e., when the number of measurements is much smaller than the number of parameters that must be estimated in the model. In the present work, a diesel engine noise source was measured by using one set of measurements from a thirty-five channel combo-array placed in front of the engine.

This work presents the implementation of the Efficient Global Optimization (EGO) approach for the design of composite materials under dynamic loading conditions. The optimization algorithm is based on design and analysis of computer experiments (DACE) in which smart sampling and continuous metamodel enhancement drive the design towards a global optimum. An expected improvement function is maximized during each iteration to locate the designs that update the metamodel until convergence. The algorithm solves single and multi-objective optimization problems. In the first case, the penetration of an armor plate is minimized by finding the optimal fiber orientations. Multi-objective formulation is used to minimize the intrusion and impact acceleration of a composite tube. The design variables include the fiber orientations and the size of zones that control the tube collapse.

The On-line Project Information System (OPIS) is a LAMP-based (Linux, Apache, MySQL, PHP) system being developed at NASA Ames Research Center to improve Agency information transfer and data availability, largely for improvement of system analysis and engineering. The tool will enable users to investigate NASA technology development efforts, connect with experts, and access technology development data. OPIS is currently being developed for NASA's Exploration Life Support (ELS) Project. Within OPIS, NASA ELS Managers assign projects to Principal Investigators (PI), track responsible individuals and institutions, and designate reporting assignments. Each PI populates a “Project Page” with a project overview, team member information, files, citations, and images. PI's may also delegate on-line report viewing and editing privileges to specific team members. Users can browse or search for project and member information.

This paper presents a new method of extracting light from optical waveguides, such as plastic optical fiber. Optical elements are designed, using mathematical modeling, so they redirect light in a controlled manner out of the waveguide. With precision manufacturing, optical elements can be produced as an integral part of optical fiber. Light extraction can also be added after manufacturing through the application of an optically shaped tape. Either method results in a highly efficient lighting element that produces significantly more light than previous methods of light extraction. Many applications of this technology are envisioned. A narrow, flexible CHMSL, automotive interior lighting, and marker/turn lights are possible applications.

This paper will discuss factors which influence attenuation in light fiber systems. These factors include bulk properties of the core material and the cladding material, as well as the characteristics of the core-cladding interface.

The present work was directed towards the design of a sideline microphone array specifically adapted to the visualization of automotive noise sources in the 500 Hz to 2000 Hz range. The particular design philosophy followed here involved the minimization of the array redundancy: i.e., the minimization of the number of pairs of microphones that are separated by the same distance in the same directions. The performance of sixty-four element microphone arrays designed according to this principle will be illustrated through the use of simulated motor vehicle passbys. In addition, their performance will be compared with more conventional array designs: e.g., elliptical, and spiral arrays.

A common challenge for both machine vision (MV) systems based on visible-spectrum cameras and for human drivers is detection of pavement markings in nighttime rainy conditions. This occurs because a layer of water refracts the light differently than air, causing conventional markings to substantially retroreflect the light away from the driver or camera when the marking is immersed. This reduces the marking retroreflectivity in wet conditions, and thus the contrast in the image collected by the camera at longer viewing distances. MV lane departure warning (LDW) systems also depend on pixel data from shorter viewing distances; the contrast here also depends on diffuse luminance of the marking, which typically is reduced if the marking is soiled or worn.

Because of the increasing concern with vehicle weight, there is an interest in lightweight materials that can serve several functions at once. Here we consider the vibration damping performance provided by an “acoustical” material (i.e., a fibrous layer that would normally be used for airborne noise control). It has been previously established that the vibration of panel structures creates a non-propagating nearfield in the region close to the panel. In that region, there is an oscillatory, incompressible fluid flow parallel to the panel whose strength decays exponentially with distance from the panel. When a fibrous medium is placed close to the panel in the region where the oscillatory nearfield is significant, energy is dissipated by the viscous interaction of the flow and the fibers, and hence the panel vibration is damped. The degree of panel damping is then proportional to the energy removed from the nearfield by the viscous interaction with the fibrous medium.

This paper explains the basic principles behind two platform technologies that my research team has developed in the field of optical metrology and optical information processing: 1) high-speed 3D optical sensing; and 2) real-time 3D video compression and streaming. This paper will discuss how such platform technologies could benefit the automotive industry including in-situ quality control for additive manufacturing and autonomous vehicle systems. We will also discuss some of other applications that we have been working on such as crime scene capture in forensics.

High surface area particles have drawn attention in the context of noise control due to their good sound absorption performance at low frequencies, which is an advantage compared with more traditional materials. That observation suggests that there is a good potential to use these particles in various scenarios, especially where low frequency noise is the main concern. To facilitate their application, composite materials are formed by dispersing particles within a fiber matrix, thus giving more flexibility in positioning those particles. In this work, a hybrid model that combines a model for limp porous materials and a model of high surface area particles is proposed to describe the acoustic performance of such composites. Two-microphone standing wave tube test results for several types of composites with different thickness, basis weight, and particle concentration are provided.

A multilayer acoustic treatment constructed of fibrous acoustic absorption material combined with dissipative acoustic material achieves a low profile and is lightweight and multi-functional, with properties that are desirable for NVH (noise, vibration, and harshness) treatments. The dissipative material consists of microfibers and acoustically active particles; this material was introduced in the last SAE NVH conference: A Novel Dissipative Acoustic Material [1]. In this paper, the acoustic performance of the multilayer treatment was evaluated by using random incidence absorption and transmission loss measurements, as well as in-vehicle experiments. Absorption and transmission loss were additionally modeled using the transmission matrix method (TMM). In the in-vehicle test, an OEM wheelhouse liner with Trim, for an SUV, was evaluated utilizing this new multilayer 3M treatment.