Search Results

The public transport in India is gradually shifting towards electric mobility. Long range in electric mobility can be served with High Voltage Battery (HVB), but HVB can sustain for its designed life if it’s maintained within a specific operating temperature range. Appropriate battery thermal management through Battery Cooling System (BCS) is critical for vehicle range and battery durability This work focus on two aspects, BCS sizing and its coolant flow optimization in Electric bus. BCS modelling was done in 1D CAE software. The objective is to develop a model of BCS in virtual environment to replicate the physical testing. Electric bus contain numerous battery packs and a complex piping in its cooling system. BCS sizing simulation was performed to keep the battery packs in operating temperature range.

Brake system design is intended to reduce vehicle speed in a very short time by ensuring vehicle safety. In the event of successive braking, brake system absorbs most of vehicle’s kinetic energy in the form of heat energy, at the same time it dissipates heat energy to the surrounding. During this short span of time, brake disc surface and rotor attains the highest temperatures which may cross their material allowable temperature limit or functional requirement. High temperatures on rotor disc affects durability & thermal reliability of the brake rotor. Excessive temperature on brake rotors can induce brake fade, disc coning which may result in reduced braking efficiency. To address the complex heat transfer and highly transient phenomenon during successive braking, numerical simulations can give more advantage than physical trials which helps to analyze complex 3D flow physics and heat dissipation from rotors in the vicinity of brake system.

In previous work, AC Compressor Cycling (ACC) was modeled by incorporating evaporator thermal inertia in Mobile Air Conditioning (MAC) performance simulation. Prediction accuracy of >95% in average cabin air temperature has been achieved at moderate ambient condition, however the number of ACC events in 1D CAE simulation were higher as compared to physical test [1]. This paper documents the systematic approach followed to address the challenges in simulation model in order to bridge the gap between physical and digital. In physical phenomenon, during cabin cooldown, after meeting the set/ target cooling of a cabin, the ACC takes place. During ACC, gradual heat transfer takes place between cold evaporator surface and air flowing over it because of evaporator thermal inertia.

Currently automotive design is facing multi facet challenges such as reduction in greenhouse gases, better thermal management, low cost solution to market, etc. Considering these challenges, effort has been taken to improve thermal management of engine while optimizing the cost of engine. Engine Lubrication system consist of Engine oil and oil cooler, which play vital role in thermal management as well as optimization of frictional losses by ensuring proper lubrication and cooling of engine components. For better thermal management of engine, a lubrication system is designed without Oil cooler, proto type made and tested. This paper deals with evaluation of various engine performance parameter and engine temperature with and without oil cooler for light duty Diesel engines on passenger car application. Further solution of Oil cooler removal and Engine cooling improvement with the help of oil change is validated at vehicle level to understand real world behavior of the system.

Automakers are being subjected to increasingly strict fuel economy requirements which led OEMs to focus more on Light weighting and Energy efficiency areas. Considering the aforesaid challenges, efforts have been taken in Light weighting of mounting bracket for Engine application. This paper deals with conversion of Engine accessory bracket from Aluminum material to Metal Matrix composite (MMC). In Design phase, existing bracket has been studied for its structural requirements and further Bracket is designed to meet MMC process requirement and CAE carried out for topology optimization and Structural integrity. Finally observations and results were compared for Existing design and Proposed design and further optimization proposed.

Electrical and Series Hybrid Vehicles are generally provided with single speed reduction gearbox. To improve performance and drive range, a two-speed gearbox with coordinated control of traction motor and gearshift actuator is proposed. For a two-speed gearbox, gearshift without clutch would increase the shifting effort. Active Synchronization is introduced for a smoother gearshift even without clutch. The quality of gearshift is considered as a function of applied shift force and time taken. To enhance the quality of the gearshift further, the location of the synchronizer in the transmission system is optimized. To validate the improvement in the quality of the gearshift, a mathematical model of the two-speed gearbox incorporating proposed location of synchronizer assembly along with active synchronization is developed. The qualitative and quantitative analysis of the results achieved is presented.

Spot weld connections are used extensively in the automotive industry to join panels of automotive structures. Spot weld connections play a very vital role in the overall structural rigidity and integrity of the Body in White. The spot weld connections and layout have direct impact on functionability of automotive structure and capital investment for robots, guns and operators. There is continuous pressure on automotive engineers to reduce the number of spot weld connections in a structure without compromising on the structural performance across various disciplines such as crash, NVH & durability. Hence the need is felt to develop a generic and systematic CAE simulation procedure which will guide the designer towards arriving at an optimum design, with minimum number of spot weld connections, which meet all the performance requirements of the structure.

Basic Function: Vehicle remote is used for vehicle lock/unlock/search/Hazard lights /approach light functions for customer convenience and vehicle security system. Conventional approach: 1 Use of separate RF (Radio Frequency) receiver -Additional Cost impact. 2 High remote RF power - Reduced remote battery life and bigger remote size required 3 High sensitivity RF receiver - High cost. Low Cost approach: It involves the followings: 1 Integration of RF receiver inside the Body Control Module (BCM). 2 Low Power Remote and Optimization of Remote PCB layout to get the maximum power. 3 External wired antenna taken out from BCM and proper routine need be ensured to get the best performance. 4 BCM mounting location to get the best remote range in all vehicle directions. This paper relates to the methodology for low cost approach for the RF communication between remote transmitter and receiver with achieving the best remote performance at vehicle level condition.

Vehicle thermal management system (VTMS) is a means of monitoring and controlling temperatures of vehicular components and aggregates to within optimum limits, thereby ensuring the proper functioning of the component or aggregate in an automobile. An integrated approach is required for developing VTMS, to satisfy the complex requirements of performance, reliability, fuel economy and human thermal comfort in modern vehicles. Fan motors and blowers play a crucial role in vehicle thermal management. These fan motors/ blower systems need to be designed in a manner such that there is minimum parasitic load on the prime mover. This work comprises performing Transient Powertrain Cooling (T-PTC) and Transient Air-conditioning (T-AC) simulation on a vehicle for prediction of parameters affecting fan operation of Condenser Radiator Fan Module (CRFM) during simulated city drive cycles.

In this paper hydropneumatic suspension system design methodology for light military tracked vehicle is discussed in detail. A guide to locate the major impact factor & its effect on the system level design is demonstrated. Spring & damping characteristics of hydropneumatic suspension have significant bearing on the tracked vehicle mobility characteristics. A methodology has been derived to optimize the kinematics of the suspension system by optimizing the load transferring leverage ratio resulting in enhanced system life. The paper also discusses the analytical method used for prediction of spring & damping characteristics and the factors affecting them.

In this paper, design methodology of antiroll bar bush is discussed. Typical antiroll bar bushes have slide or slip mechanism, to facilitate the relative motion between ARB and bush. Inherently, this relative motion causes wear and noise of bush. To eliminate stated failure modes, the next generation bushes have been developed, which are using torsion properties instead of slip function. These bushes are already being used in various vehicles. This paper focuses on developing the simple mathematical model, design approach and optimization of ARB bushes. Also, comparison study is presented exploring, the differences and design criteria's between conventional and new generation anti-roll bar bushes.

In an era of exceptional digital computation and immense indulgence in the theoretical behavior of sheet metal during its manufacturing process, the simulation of sheet metal forming becomes the most feasible and viable option for every OEM to consider this prior to its manufacturing. This paper contains a methodology for using an optimizing tool like Hyper Study to get the best formed part by incorporating forming benchmarked parameters like FLD (forming limit diagram), percentage thinning and plastic strains as responses by building up expressions among various variables and thus optimizing the forming process parameters like blank holding pressure, sliding friction, and Draw bead restraining force effectively to meet the formability requirements. This would reduce the time and effort of a forming engineer to reiterate among these parameters to get the desired result effortlessly.

Passenger comfort and safety are major drivers in a typical automotive design and optimization cycle. Addressing thermal comfort requirements and the thermal management of the passenger cabin within a car, which involves accurate prediction of the temperature of the cabin interior space and the various aggregates that are present in a cabin, has become an area of active research. Traditionally, these have been done using experiments or detailed three-dimensional Computational Fluid Dynamics (CFD) analysis, which are both expensive and time-consuming. To alleviate this, recent approaches have been to use one-dimensional system-level simulation techniques with a goal to shorten the design cycle time and reduce costs. This paper describes the use of Modelica language to develop a one-dimensional mathematical model using Modelica language for automotive cabin thermal assessment when the car is subjected to solar heat loading.

Handling performance of a vehicle is a key characteristic determining the response of vehicle under different operating scenarios. An insight into these vehicle-handling characteristics at early stage can be extremely useful in the design and development process. Tire characterization and tuning is important and mandatory to scrutinize each functional and individual parameter of tire. Tire force and moment data is having a significant effect in vehicle handling. Segregation of tire parameter, which is contributing vehicle-handling performance, helps to identify and perform optimization for improvisation. The main objective of this study is development and integration optimized 1D tire model into multibody dynamics model of the vehicle to observe various vehicle compliances towards its handling performance target.

Vehicles have a wide range of resonance band due to design nature & characteristics of its aggregates. First order, vehicle speed dependent, wheel disturbance due to wheel imbalances can result in excitation of different vehicle aggregates. Steering wobble refers specifically to first order road wheel excitation effects, in frequency range of 10-16 Hz, that manifest themselves as significant steering wheel torsional vibrations at highway speeds i.e. at the range of 80 km/h to 120 km/h on smooth roads. The tire, being an elastic body analogous to an array of radial springs, may exhibit variations in stiffness about its circumference; hence, it may vibrate at different frequencies due to wheel imbalance. This paper introduces dynamic steering wobble analysis methodology either using vehicle speed at Discrete (individual speeds) or by Sweep (low to high speed) method to investigate steering wobble in the virtual environment using the full vehicle MBD model.