Search Results

This paper describes an effective integrated method for estimation of subject-specific mass, inertia tensor, and center of mass of individual body segments of a digital avatar for use with physics-based digital human modeling simulation environment. One of the main goals of digital human modeling and simulation environments is that a user should be able to change the avatar (from male to female to a child) at any given time. The user should also be able to change the various link dimensions, like lengths of upper and lower arms, lengths of upper and lower legs, etc. These customizations in digital avatar's geometry change the kinematic and dynamic properties of various segments of its body. Hence, the mass and center of mass/inertia data of the segments must be updated before simulating physics-based realistic motions. Most of the current methods use mass and inertia properties calculated from a set of regression equations based on average of some population.

A method to simulate digital human running using an optimization-based approach is presented. The digital human is considered as a mechanical system that includes link lengths, mass moments of inertia, joint torques, and external forces. The problem is formulated as an optimization problem to determine the joint angle profiles. The kinematics analysis of the model is carried out using the Denavit-Hartenberg method. The B-spline approximation is used for discretization of the joint angle profiles, and the recursive formulation is used for the dynamic equilibrium analysis. The equations of motion thus obtained are treated as equality constraints in the optimization process. With this formulation, a method for the integration of constrained equations of motion is not required. This is a unique feature of the present formulation and has advantages for the numerical solution process.

Our previous formulation for optimization-based dynamic motion simulation of a serial-link human upper body (from waist to right hand) is extended to predict the motion of a tree-structured human model that includes the torso, right arm, and left arm, with various applied external loads. The dynamics of tree-structured systems is formulated and implemented. The equations of motion for the tree structures must be derived carefully when dealing with the connection link. The optimum solution results show realistic dual-arm human motions and the required joint actuator torques. In the second part of this paper, a new method is introduced in which the constraint forces and moments at the joints are calculated along with the motion and muscle-induced actuator torques. A set of fictitious joints are modeled in addition to the real joints.

Reliability-based design optimization (RBDO), which includes design optimization in design space and inverse reliability analysis in standard normal space, has been recently developed under the assumption that all input variables are independent because it is difficult to construct a joint probability distribution function (PDF) of input variables with limited data such as the marginal PDF and covariance matrix. However, since in real applications, it is common that some of the input variables are correlated, the RBDO results might contain a significant error if the correlation between input variables for RBDO is not considered. In this paper, Rosenblatt and Nataf transformations, which are the most representative transformation methods and have been widely used in the reliability analysis, have been studied and compared in terms of applicability to RBDO with correlated input variables.

The objective of this paper is to present our method of predicting and simulating visually realistic and dynamically consistent human stair-climbing motion. The digital human is modeled as a 55-degrees of freedom branched mechanical system with associated human anthropometry-based link lengths, mass moments of inertia, and centers of gravity. The joint angle profiles are determined using a B-spline-based parametric optimization technique subject to different physics-based, task-based, and environment-based constraints. The formulation offers the ability to study effects of the magnitude and location of external forces on the resulting joint angle profiles and joint torque profiles. Several virtual experiments are conducted using this optimization-based approach and results are presented.

A framework to validate the predicted motion of a computer human model (Santos) is presented in this work. The proposed validation framework is a task-based methodology. It depends on the comparison of selected motion determinants and joint angles that play major roles in the task, using qualitative and quantitative statistical techniques. In the present work, the validation of Santos walking will be presented. Fortunately, the determinants for normal walking are well defined in the literature and can be represented by (i) hip flexion/extension, (ii) knee flexion/extension, (iii) ankle plantar/dorsiflexion, (iv) pelvic tilt, (v) pelvic rotation, and (vi) lateral pelvic displacement. While Santos is an ongoing research project, the results have shown significant qualitative agreements between the walking determinants of Santos and the walking determinants of four normal subjects.

Active steering systems can help the driver to master critical driving situations. This paper presents a fuzzy logic control strategy on active steering vehicle based on a multi-body vehicle dynamic model. The multi-body vehicle dynamic model using ADAMS can accurately predict the dynamic performance of the vehicle. A new hybrid steering scheme including both active front steering (applying an additional front steering angle besides the driver input) and rear steering is presented to control both yaw velocity and sideslip angle. A set of fuzzy logic rules is designed for the active steering controller, and the fuzzy controller can adjust both sideslip angle and yaw velocity through the co-simulation between ADAMS and the Matlab fuzzy control unit with the optimized membership function. To ensure the design of high-quality fuzzy control rules, a rule optimization strategy is introduced.

A general methodology and associated computational algorithm for predicting realistic postures of digital humans (mannequins) in a virtual environment is presented. The basic plot for this effort is a task-based approach, where we believe that humans assume different postures for different tasks. The underlying problem is characterized by the calculation (or prediction) of the joint displacements of the human body in such a way to accomplish a specified task. In this work, we have not limited the number of degrees of freedom associated with the model. Each task has been defined by a number of human performance measures that are mathematically represented by cost functions that evaluate to a real number. Cost functions are then optimized, i.e., minimized or maximized subject to a number of constraints. The problem is formulated as a multi-objective optimization algorithm where one or more cost functions are considered as objective functions that drive the model to a solution.

The effect of restrictive clothing on functional reach and on balance and gait during obstacle crossing of five normal subjects is presented in this work using motion capture and stability analyses. The study has shown that restrictive clothing has considerably reduced participants' functional reach. It also forced the participants to change their motion strategy when they cross-higher obstacles. When crossing higher obstacles, the participants averted their stance foot, abducted their arms, flexed their torso, used longer stance time, and increased their hip angle in the medial-lateral (Rolling) and vertical (Yawing) directions. The stability analysis of a virtual human skeletal model with 18 links and 25 degrees of freedom has shown that participants' stability has become critical when they wear restrictive clothing and when they cross higher obstacles.

New methods for fast, adaptive motion prediction of a virtual human are proposed and tested. An optimal locomotion for gait-driven motions like pushing, climbing and pick-up/delivery are sought through gradient-based optimization and inverse-dynamics. Such gait-driven motion can be produced by adapting the normal gait motion to the case when a characteristic force is applied, which is called an applied force. The applied force is a resistance force for pushing case and an object weight for delivery case. The concept of the zero moment point is modified to assess the dynamic equilibrium of the motion in presence of the applied force. For fast calculation, analytical forms of the cost/constraint gradients are provided. Stepping patterns are specified a priori to ensure the continuity of the cost/constraint function gradients. Also, by varying knots for the B-spline curve approximation, the gait stage durations are optimized.

This paper presents an optimization-based algorithm for simulating the dynamic motion of a digital human. We also formulate the metabolic energy expenditure during the motion, which is calculated within our algorithm. This algorithm is implemented and applied to Santos™, an avatar developed at The University of Iowa. Santos™ is a part of a virtual environment for conducting digital human analysis consisting of posture prediction, motion prediction, and physiology studies. This paper demonstrates our dynamic motion algorithm within the Santos™ virtual environment. Mathematical evaluations of human performance are essential to any effort to compare various ergonomic designs. In fact, the human factors design process can be formulated as an optimization problem that maximizes human performance. In particular, an optimal design must be found while taking into consideration the effects of different motions and hand loads corresponding to a number of tasks.

Simulating human motion is a complex problem due to redundancy of the human musculoskeletal system. The concept of task-based motion prediction using single- or multi-objective optimization techniques provides a viable approach for predicting intermediate motions of digital humans. It is shown that task-based motion prediction is in fact a numerical optimal control problem. Alternative formulations for simulation of human motion are possible and can be solved by modern nonlinear optimization methods. Three techniques based on state variable elimination, direct collocation and differential inclusion are presented and compared. The basic idea of the formulations is to treat different combinations of the state variables, such as the joint profiles and torques or their parametric representations as independent variables in the optimization process.

This paper presents a SANTOS™ 25 degree-of-freedom (DOF) hand model and the forward and inverse kinematic analysis. The Denavit-Hartenberg (D-H) method is used to define the position of the end- effector (fingertip). In the SANTOS™ hand model each finger has different constraints and movements (e.g., the middle finger in distal Interphalangeal (DIP) joint can move in Flexion/Extension (F/E) with a range 0–100 degrees, and the thumb in interphalangeal (IP) joint can rotate in F/E with arrange of 15H/80). Including hand model SANTOS™ has over 100 DOFs and the forward and inverse kinematics have been studied. Optimization-based dynamic motion prediction will be used to consider different gestures for hand grasping.

This paper presents new capabilities of the virtual-human Santos™ introduced last year. Santos™ is an avatar that has extensive modeling and simulation features. It is a digital human model with over 100 degrees-of-freedom (DOF), where the hand model has 25 DOF, direct optimization-based method, and real-human like appearance. The newly developed analysis includes (1) a 25-DOF hand model that is the first step to study hand grasping; (2) posture prediction advances such as multiple end-effectors (two arms, two arms + head + legs), real-time inverse kinematics for posture prediction for any points, vision functionality; (3) dynamic motion prediction with external loads; and (4) musculosteletal modeling that includes determining muscle forces, and muscle stress.

In the Army mechanical fatigue subject to external and inertia transient loads in the service life of mechanical systems often leads to a structural failure due to accumulated damage. Structural durability analysis that predicts the fatigue life of mechanical components subject to dynamic stresses and strains is a compute intensive multidisciplinary simulation process, since it requires the integration of several computer-aided engineering tools and considerable data communication and computation. Uncertainties in geometric dimensions due to manufacturing tolerances cause the indeterministic nature of the fatigue life of a mechanical component.

We propose an algorithm of predicting dynamic biped motions of Santos™ human model. An alternative and efficient formulation of the Zero-Moment Point (ZMP) for dynamic balance and the approximated ground reaction forces/moments are derived from the resultant reaction loads, which includes the gravity, the externally applied loads, and the inertia. The optimization problem is formulated to address the redundancy of the human task, where the general biped and the task-specific constraints are imposed depending on the task requirements. The proposed method is fully predictive and generates physically feasible human-like motions from scratch without any input reference from motion capture or animation. The resulting generated motions demonstrate how a human reacts effectively to different external load conditions in performing a given task by showing realistic features of cause and effect.