The scope of this Aerospace Recommended Practice (ARP) covers where, when, and how often to sample hydraulic system fluid on aerospace vehicles for particulate contamination measurements. The measurement of hydraulic fluid particulate contamination is of concern to the aerospace community because of the critical importance of hydraulic equipment reliability. Contamination is always present in the system fluid, even in new unused fluid. Contamination must be below a level that will not adversely affect system operation. This ARP draws from aerospace industry experience and practice to establish criteria for fluid contamination sampling recommendations in aerospace vehicle hydraulic systems. Fluid samples can then be subjected to measurement of particulate contamination and of other harmful contaminants such as chlorinated solvents and water.
This SAE Aerospace Recommended Practice (ARP) establishes the factors which should be considered in the design and installation of a hydraulic system fitted to a commercial transport rotorcraft.
This SAE Aerospace Recommended Practice (ARP) establishes the factors which should be considered in the design and installation of a hydraulic system fitted to a commercial transport rotorcraft.
This SAE Aerospace Recommended Practice (ARP) establishes the factors which should be considered in the design and installation of a commercial transport rotorcraft hydraulic system, including the applicable airworthiness regulations that affect the hydraulic system. This ARP also provides information and guidelines on the many factors that arise in the design process to provide cost effectiveness, reliability, maintainability and accepted design and installation practices.
This SAE Aerospace Recommended Practice (ARP) establishes the factors which should be considered in the design and installation of a commercial transport rotorcraft hydraulic system, including the applicable airworthiness regulations that affect the hydraulic system. This ARP also provides information and guidelines on the many factors that arise in the design process to provide cost effectiveness, reliability, maintainability and accepted design and installation practices.
This SAE Aerospace Recommended Practice (ARP) describes the recommended tests and their associated test means for commercial aircraft hydraulic systems at the system level that are required to demonstrate compliance with the 14 CFR Part 25 and EASA CS 25 airworthiness regulations, and to show that the required level of maturity at the aircraft entry into service (EIS) has been achieved.
This SAE Aerospace Recommended Practice (ARP) describes the recommended tests and their associated test means for commercial aircraft hydraulic systems at the system level that are required to demonstrate compliance with the 14 CFR Part 25 and EASA CS 25 airworthiness regulations, and to show that the required level of maturity at the aircraft entry into service (EIS) has been achieved.
The purpose of this SAE Aerospace Recommended Practice (ARP) is to provide guidelines for determining the hydraulic flow demands for all phases of commercial flight including details of sizing of associated hydraulic components such as hydraulic pumps, hydraulic accumulators, hydraulic reservoirs, hydraulic filters, and hydraulic tubing.
This SAE Aerospace Recommended Practice (ARP) establishes the factors which should be considered in the design and installation of a hydraulic system that is fitted to a commercial transport aircraft.
This SAE Aerospace Recommended Practice (ARP) provides guidance for the design and installation of a commercial aircraft hydraulic system to meet the applicable requirements, including the applicable airworthiness regulations that affect the hydraulic system design. This ARP also provides information and guidelines on the many factors that arise in the design process to provide cost effectiveness, reliability, maintainability and accepted design and installation practices.
This SAE Aerospace Recommended Practice (ARP) establishes the requirements for the design and installation of a commercial aircraft hydraulic system, including the applicable airworthiness regulations that affect the hydraulic system. This ARP also provides information and guidelines on the many factors that arise in the design process to provide cost effectiveness, reliability, maintainability and accepted design and installation practices.
This SAE Aerospace Recommended Practice (ARP) provides guidance for the design and installation of a commercial aircraft hydraulic system to meet the applicable requirements, including the applicable airworthiness regulations that affect the hydraulic system design. This ARP also provides information and guidelines on the many factors that arise in the design process to provide cost effectiveness, reliability, maintainability and accepted design and installation practices.
This ARP defines a recommended placard for readily identifying equipment with aircraft phosphate ester fluid to be used in the aircraft hydraulic systems to assure compatibility between the internal seals/materials and the system fluid. A definition is provided for a durable type and semipermanently attached placard with prescribed text for the permissible fluid are included in the document.
This ARP defines a recommended placard for readily identifying equipment with aircraft phosphate ester fluid to be used in the aircraft hydraulic systems to assure compatibility between the internal seals/materials and the system fluid. A definition is provided for a durable type and semipermanently attached placard with prescribed text for the permissible fluid are included in the document.
This SAE Aerospace Standard (AS) provides general requirements for components that are used in commercial aircraft hydraulic systems. It also includes the 14 CFR Part 25/CS 25 regulations that apply to hydraulic components. It also provides information to be included in the Procurement Specification in Appendix A and a checklist for design reviews in Appendix B. It does not provide requirements for distribution elements such as hoses, pipe fittings and general tubing.
This specification covers the requirements that are common to most components used in commercial aircraft hydraulic systems. This specification shall be used to develop Procurement Specifications for components.
This SAE Aerospace Standard (AS) provides general requirements for components that are used in commercial aircraft hydraulic systems. It also includes the FAR/JAR/CS 25 regulations that apply to hydraulic components. It is to be used in conjunction with a Procurement Specification for each component. It also provides information to be included in the Procurement Specification in Appendix A and a checklist for design reviews in Appendix B. It does not provide information on distribution elements such as hoses, pipe couplings and general tubing.
This SAE Aerospace Standard (AS) provides general requirements for components that are used in commercial aircraft hydraulic systems. It also includes the 14 CFR Part 25/CS 25 regulations that apply to hydraulic components. It also provides information to be included in the Procurement Specification in Appendix A and a checklist for design reviews in Appendix B. It does not provide requirements for distribution elements such as hoses, pipe fittings and general tubing.