This specification covers one type of 5,000-pound capacity aircraft cargo tie down. The tie down is designated CGU-1/B and is furnished in a minimum length of 240 inches.
This SAE Aerospace Recommended Practice (ARP) provides guidelines for the effective operation and use of fire containment covers (FCCs). Technical Standard Orders (TSOs) C203 and C90e (and later revisions) incorporate AS6453, and provide the Minimum Performance Standards (MPS) for an FCC design. The net and pallet used with the FCC must be approved using the updated net and flammability requirements in TSO C90e and later revisions. However, fire containment performance also requires this equipment is properly used. Fire safety is compromised when FCCs are used in an inadequate manner.
Air cargo pallets and their cargo restraint nets constitute aircraft Unit Load Devices, defined by industry standards and airworthiness certified based on Technical Standard Order (TSO) C90c in accordance with the requirements of NAS 3610. This guarantees their design to be intrinsically safe for flight on board compatible aircraft types. However, actual flight safety also requires these certified pieces of equipment to be properly used: numerous occurrences have demonstrated a certified ULD can nevertheless jeopardize flight safety if loaded or restrained in an inadequate manner.
This SAE Aerospace Standard (AS) covers the requirements for lower deck containers in wide body and standard body aircraft which do not require airworthiness certification under the condition of compartment restraint and/or, where applicable according to aircraft type, NAS3610 equivalent baseplate-restraint for these containers. NOTE: IATA 50/0, “Requirements for interlining of ULDs”, should also be taken into account when designing and making equipment.
This document establishes dimensional, structural, and environmental requirements for two types of interline pallet nets. Type II covers NAS 3610 code sizes and Type III covers other sizes not currently included in NAS 3610.
The tests are static in nature to minimize complexity and cost of required testing facilities. As far as practical, applied static loads should take into account the combined static and dynamic loads anticipated in service.
The tests are static in nature to minimize complexity and cost of required testing facilities. As far as practical, applied static loads should take into account the combined static and dynamic loads anticipated in service.
Since the ULD device containing textiles should have a predictable service life, there should be data available so that predictions can be made. This technical report compiles available information on textiles of the types used in air cargo ULD devices and reviews the degradation characteristics of each. Textiles are used primarily in cargo restraint nets on air cargo pallets and non structural containers, restraint nets installed in cargo aircraft, and similar applications.
This SAE Aerospace Standard (AS) specifies the minimum design and performance criteria and testing methods of fire containment covers (FCCs) used either: a In those cargo compartments of civil transport aircraft where they constitute one means of complying with applicable airworthiness regulations, or b On a voluntary basis, when deemed appropriate by operators to improve fire protection in aircraft cargo compartments where airworthiness regulations do not mandate their use.
This SAE Aerospace Standard (AS), identical to ISO 14186, specifies the minimum design and performance criteria and testing methods of fire containment covers (FCCs) used either: a in those cargo compartments of civil transport aircraft where they constitute one means of complying with applicable airworthiness regulations, or b on a voluntary basis, when deemed appropriate by operators to improve fire protection in aircraft cargo compartments where airworthiness regulations do not mandate their use.
This document provides information about regulations and gives recommendation for the design of ULD - type main deck and lower deck mobile crew rest containers to be transported in aircraft equipped with a Class II restraint system as defined by NAS 3610.
This document provides information about regulations and gives recommendation for the design of ULD - type main deck and lower deck mobile crew rest containers to be transported in aircraft equipped with a Class II restraint system as defined by NAS 3610.
This Aerospace Standard (AS) specifies the minimum design and performance criteria and testing methods of passive fire resistant containers (FRCs) used either: a In those cargo compartments of civil transport aircraft where they constitute one means of complying with applicable airworthiness regulations, or b On a voluntary basis, when deemed appropriate by operators to improve fire protection in aircraft cargo compartments where airworthiness regulations do not mandate their use.