Search Results

Standard

COMMUNICATIONS MANAGEMENT UNIT (CMU) MARK 2

2019-11-26

CURRENT

ARINC758-4

This ARINC Standard specifies the ARINC 758 Mark 2 Communications Management Unit (CMU) as an on-board message router capable of managing various datalink networks and services available to the aircraft. Supplement 4 adds Ethernet interfaces, per ARINC Specification 664 Part 2. This will allow the CMU to communicate with IP based radio transceivers (e.g., L-Band Satellite Communication Systems (Inmarsat SwiftBroadband (SBB) and Iridium Certus), ACARS over IP, AeroMACS, etc.).

Standard

CABIN CONNECTORS AND CABLES PART 2 SPECIFICATION OF CONNECTORS, CONTACTS, AND BACKSHELLS

2021-09-09

CURRENT

ARINC800P2-2

This specification describes the general connectors, contacts, and backshells in their shape and characteristic for cabin systems for commercial aircrafts. ARINC 600, ARINC 404, and ARINC 801 connector specifications are published as independent standards.

Standard

AIRCRAFT SOFTWARE COMMON CONFIGURATION REPORTING

2019-08-13

CURRENT

ARINC843-1

This standard defines a common configuration report format that can be retrieved from an aircraft for use by ground tools and maintenance personnel. Reports will be generated in Extensible Markup Language (XML) format and structured as defined by this document. Several optional elements and attributes are defined to allow flexibility for a given report. This standard provides aircraft manufacturers, regulatory agencies, and airlines a format standard for aircraft configuration reporting, and facilitates automated comparison of configuration data reports (e.g., authorized versus as flying, etc.).

Standard

AIRCRAFT DATA INTERFACE FUNCTION (ADIF)

2020-07-21

CURRENT

ARINC834-8

This document defines an Aircraft Data Interface Function (ADIF) developed for aircraft installations that incorporate network components based on commercially available technologies. This document defines a set of protocols and services for the exchange of aircraft avionics data across aircraft networks. A common set of services that may be used to access specific avionics parameters are described. The ADIF may be implemented as a generic network service, or it may be implemented as a dedicated service within an ARINC 759 Aircraft Interface Devices (AID) such as those used with an Electronic Flight Bag (EFB). Supplement 8 includes improvements in the Aviation Data Broadcast Protocol (ADBP), adds support for the Media Independent Aircraft Messaging (MIAM) protocol, and contains data security enhancements. It also includes notification and deprecation of the Generic Aircraft Parameter Service (GAPS) protocol that will be deleted in a future supplement.

Standard

AIRCRAFT DATA NETWORK, PART 1, SYSTEMS CONCEPTS AND OVERVIEW

2019-06-20

CURRENT

ARINC664P1-2

The purpose of this document is to provide an overview of data networking standards recommended for use in commercial aircraft installations. These standards provide a means to adapt commercially defined networking standards to an aircraft environment. It refers to devices such as bridges, switches, routers and hubs and their use in an aircraft environment. This equipment, when installed in a network topology, can optimize data transfer and overall avionics performance.

Standard

GUIDANCE FOR DISTRIBUTED RADIO ARCHITECTURES

2021-07-15

CURRENT

ARINC678

The purpose of this document is to evaluate Communication, Navigation, and Surveillance (CNS) Distributed Radio architectures and the feasibility of distributing the RF and systems processing sections to ensure the following: Reduce cost of equipment Reduce Size, Weight, and Power (SWaP) Ease of aircraft integration Growth capability built into the design Maintain or improve system availability, reliability, and maintainability It provides a framework to determine whether it is feasible to develop ARINC Standards that support CNS distributed radio architectures.

Standard

AIRCRAFT AUTONOMOUS DISTRESS TRACKING (ADT)

2019-08-26

CURRENT

ARINC680

This document describes the technical requirements, architectural options, and recommended interface standards to support an Autonomous Distress Tracking (ADT) System intended to meet global regulatory requirements for locating aircraft in distress situations and after an accident. This document is prepared in response to International Civil Aviation Organization (ICAO) and individual Civil Aviation Authorities (CAAs) initiatives.

Standard

INTERSYSTEM NETWORK INTEGRATION

2021-06-24

CURRENT

ARINC688

The purpose of this document is to provide guidelines for integrating previously standalone cabin systems such as cabin management systems, In-Flight Entertainment (IFE) systems, In-Flight Connectivity (IFC) systems, galley systems, surveillance systems, etc. Resource sharing between systems can reduce airline costs and/or increase functionality. But, as systems expose their internal resources to external systems, the risk of an intrusion that could degrade function and/or negatively expose the supplier’s or airline’s brand increases. This document provides a recommended IP networking design framework between aircraft systems to reduce the operational security threats while still supporting the necessary intersystem routing.

Standard

ONBOARD SECURE WI-FI NETWORK PROFILE STANDARD

2021-06-18

CURRENT

ARINC687

This document defines a standard implementation for strong client authentication and encryption of Wi-Fi-based client connections to onboard Wireless LAN (WLAN) networks. WLAN networks may consist of multi-purpose inflight entertainment system networks operating in the Passenger Information and Entertainment System (PIES) domain, dedicated aircraft cabin wireless networks or localized Aircraft Integrated Data (AID) devices operating in the Aircraft Information Services (AIS) domain. The purpose of this document is to focus on the client devices requiring connections to these networks such as electronic flight bags, flight attendant mobile devices, onboard Internet of Things (IoT) devices, AID devices (acting as clients) and mobile maintenance devices. Passenger devices are not within the focus of this document.

Standard

ROADMAP FOR IPV6 TRANSITION IN AVIATION

2020-06-19

CURRENT

ARINC686

ARINC Report 686 represents the consensus of industry to prepare a roadmap migration from IPv4 to IPv6. This document describes airline objectives (air and ground side when possible) towards the development and introduction of IPv6. There are three distinct elements considered: 1) the applications for addressing aspects 2) the communication network(s) over which the applications are running for the IP protocol level itself and associated features, and 3) the physical link(s) the network(s) interface.

Standard

TIMELY RECOVERY OF FLIGHT DATA (TRFD)

2021-08-06

CURRENT

ARINC681

The difficulty in locating crash sites has prompted international efforts for alternatives to quickly recover flight data. This document describes the technical requirements and architectural options for the Timely Recovery of Flight Data (TRFD) in commercial aircraft. ICAO and individual Civil Aviation Authorities (CAAs) levy these requirements. The ICAO Standards and Recommended Practices (SARPs) and CAA regulations cover both aircraft-level and on-ground systems. This report also documents additional system-level requirements derived from the evaluation of ICAO, CAA, and relevant industry documents and potential TRFD system architectures. It describes two TRFD architectures in the context of a common architectural framework and identifies requirements. This report also discusses implementation recommendations from an airplane-level perspective.

Standard

MARK I AVIATION KU-BAND AND KA-BAND SATELLITE COMMUNICATION SYSTEM PART 1 PHYSICAL INSTALLATION AND AIRCRAFT INTERFACES

2019-09-19

CURRENT

ARINC791P1-3

This standard sets forth the desired characteristics of Aviation Ku-band Satellite Communication (Satcom) and Ka-band Satcom Systems intended for installation in all types of commercial air transport aircraft. The intent of this characteristic is to provide guidance on the interfaces, form, fit, and function of the systems. This document also describes the desired operational capability of the equipment needed to provide a broadband transport link that can be used for data, video, and voice communications typically used for passenger communications and/or entertainment. The systems described in this characteristic are not qualified, at this writing, for aviation safety functions.

Standard

CABIN ARCHITECTURE FOR WIRELESS DISTRIBUTION SYSTEM

2019-08-13

CURRENT

ARINC820

This document defines a secure Wi-Fi distribution network installed in the aircraft passenger cabin for passenger and crew use. Carry-on Portable Electronic Devices (PEDs) such as smart phones, tablets, and laptops may use this network to access public internet services provided on the aircraft.

Standard

MEDIA INDEPENDENT SECURE OFFBOARD NETWORK

2020-06-19

CURRENT

ARINC848

ARINC Specification 848 is a functional standard based on a protocol specification profile for a secured network interface. The purpose is to define a common method of initiating a mutually authenticated tunnel between an aircraft service and its Enterprise service. ARINC Specification 848 defines a standard implementation for securing the communications between an onboard Local Area Network (LAN) and an Enterprise LAN on the ground. Various aircraft network architectures and various air to ground communication channels (aka media) are accommodated in this document. For example, L-band Satellite Communication (Satcom), Ku/Ka-band Satcom, Gatelink Cellular, and Gatelink are considered.

Standard

INTERNET PROTOCOL SUITE (IPS) FOR AERONAUTICAL SAFETY SERVICES PART 1 AIRBORNE IPS SYSTEM TECHNICAL REQUIREMENTS

2021-06-21

CURRENT

ARINC858P1

ARINC 858 Part 1 defines the airborne data communication network infrastructure for aviation safety services using the Internet Protocol Suite (IPS). ARINC 858 builds upon ICAO Doc 9896, Manual on the Aeronautical Telecommunication Network (ATN) using Internet Protocol Suite (IPS) Standards and Protocol. IPS will extend the useful life of data comm services presently used by operators, e.g., VDL, Inmarsat SBB, Iridium NEXT, and others. It represents the evolutionary path from ACARS and ATN/OSI to the end state: ATN/IPS. ARINC 858 includes advanced capabilities such as aviation security and mobility. This product was developed in coordination with ICAO WG-I, RTCA SC-223, and EUROCAE WG-108.

Standard

CNS/ATM AVIONICS, FUNCTIONAL ALLOCATION AND RECOMMENDED ARCHITECTURES

2001-01-15

CURRENT

ARINC660A

This standard expands ARINC 660 to include industry-defined architectures for the CNS/ATM operating environment. These architectures are intended to meet long-term requirements (e.g., ADS-B, CPDLC, etc.) and provide growth for the future. Airlines support the implementation of these architectures for the long-term. This standard represents broad airline consensus for developing avionics equipment providing CNS/ATM operating capabilities.

Standard

CNS/ATM AVIONICS, FUNCTIONAL ALLOCATION AND RECOMMENDED ARCHITECTURES

1995-12-15

CURRENT

ARINC660

Defines a set of standard aircraft avionics architectures that support a cost-effective evolution to the fully operational CNS/ATM environment. These architectures are intended to meet near-term requirements (e.g., FANS-1, SCAT-1, etc.) and provide growth for supporting the full CNS/ATM function set. This standard represents broad airline consensus for developing avionics equipment providing CNS/ATM operating capabilities.

Standard

CNS/ATM AVIONICS ARCHITECTURES SUPPORTING NEXTGEN/SESAR CONCEPTS

2014-01-10

CURRENT

ARINC660B

This document identifies and describes the aircraft avionics capability necessary for operation in the evolving Communications Navigation Surveillance/Air Traffic Management (CNS/ATM) environment expected for the FAA NextGen program, Single European Sky ATM Research (SESAR) program and considerations of the Japan Collaborative Actions for Renovation of Air Traffic Systems (CARATS). These capabilities are intended to satisfy the industry's long-term CNS/ATM operational objectives.

Standard

MARK 2 NETWORK SERVER SYSTEM (NSS) FORM AND FIT DEFINITION

2008-12-09

CURRENT

ARINC763A

This document defines both wired and wireless NSS components that enable the creation of airborne networks that are scalable, interchangeable, upgradeable, and remotely manageable with minimum cost. Aircraft equipment configurations and aircraft wiring recommendations are also described to allow aircraft network growth through the simple addition or replacement of NSS components. Hardware characteristics of standardized components are described without specifying equipment capacity or the operational functions of those components.

Standard

AERONAUTICAL MOBILE AIRPORT COMMUNICATION SYSTEM (AEROMACS) TRANSCEIVER AND AIRCRAFT INSTALLATION STANDARDS

2017-07-07

CURRENT

ARINC766

This documents defines the Installation Characteristics of an airborne radio transceiver capable of broadband wireless communication with an Airport Surface Network. The Aeronautical Mobile Airport Communications System (AeroMACS) Radio Unit (ARU) will operate in the aeronautical protected frequency of 5091 MHz to 5150 MHz, utilizing the IEEE 802.16e WiMAX protocol. It is intended to offload some of the congested narrowband VHF airport traffic used for ATS and AOC communications. ARU and Antenna Form, Fit, Function and Interfaces are described.